! SAFETY INSTRUCTIONS !
The Eliminator has been designed to be used
safely. This can only be done if the safety
instructions described in this manual are followed
fully.
Read and understand (Fig. 1) the manual before
you start using the Eliminator.
If the machine is used as described in the manual,
there is the risk of injury and/or damage to the
Eliminator.
(1) When using the machine the operator must be competent and must have
competently adjusted the machine to the surface to be treated.
With incompetent usage and damage resulting from it the manufacturer will not
accept any responsibility; all risks associated with this are the sole responsibility of
the user.
Incompetent usage also includes not following the manufacturer’s directions for use,
maintenance or repairs.
Before using the Eliminator, first inspect the area to be treated.
Remove loose obstacles and avoid irregularities.
(2) The Eliminator has been manufactured according to the latest technological insights
and is safe for use.
Should the machine be used, maintained or repaired by inexpert persons, then there
is a risk of injury to both the user and third parties. This must be avoided!
(3) All persons that have been designated by the owner to operate, maintain or repair the
Eliminator, must have read and fully understood the users’ manual and especially the
chapter Safety instructions.
The operator is responsible for the safe usage of the Eliminator.
(4) The operator is required to check for visible damage and defects before he/she
starts using the Eliminator. Alterations to the Eliminator (including its operation) that
influence the safety negatively must be remedied immediately.
Making alterations or additions to the Eliminator (excluding those approved by the
manufacturer) are not permitted, in principle, for safety reasons.
If modifications to the Eliminator have been made, then the current CE mark is
cancelled and whoever made these modifications must apply for a new CE mark
himself.
