RecorderGear TR600 User manual
TR600
PHONE RECORDER
USER MANUAL
1 Year Warranty
All RecorderGear™ brand products are backed by our 1 Year Warranty. For
full details visit
www.recordergear.com
MID: AR100
Table Of Contents
Section & Title Page #
1Insert SD Card 4
2Navigating The TR600 5
3Record On Analog Phones 6
4Record On Digital, IP, and Multi-line Phones 8
5MIC Mode 11
6Settings 13
7Playback 14
8Call Assistant 15
9Call Assistant Overview 16
10 Specs 19
4
1Insert SD Card
The purpose of the SD card is to store phone call recordings (supports up
to a 32GB SD card). The TR600 will not work without an SD card, please
make sure it is inserted before operating the TR600.
1. Insert an SD card into the card slot on the side of the TR600 (a class 10
card is recommended).
2. You will feel a click when the card has been inserted correctly.
3. To remove the SD card, push the card in until you feel a spring release;
the SD card will be ejected when you let go.
NOTE - If no SD card is inserted, the TR600 will not power on; there will be
a load beep and a SD card error.
5
2 Navigating The TR600
The diagram below outlines the TR600 buttons. You will use these buttons
to perform various functions & navigate the menu.
NOTE - The Left/Right Select Keys correspond to menu items in the
lower left/right of the screen menu. The Up/Down Button allows you to
scroll up or down to different menu options. The Back Button will always
take you back to the previous screen/menu
6
3Record On Analog Phones
To record on an analog phone you will need to put the TR600 in Line
Mode. This section shows you how to put the TR600 in the proper mode
and how to connect it to an analog phone.
The diagram below shows you how to properly connect the TR600 to an
analog line and then to your phone.
7
A. CONNECT THE TR600
1. Connect the TR600 to the wall jack - Run the phone line from the wall
jack to the line port on the back of the TR600
2. Connect your phone to the TR600 - Run the phone line from the phone
base to the Phone Port on the back of the TR600
B. ENTER LINE MODE
1. Make sure the SD card is inserted & the AAA batteries are installed
2. Plug the TR600 into a wall outlet using the provided cord & adapter
3. Make sure the source switch on the side of the TR600 is in the PHONE
position.
4. Enter the Settings menu (press right select key).
5. Select Recording Settings (press left select key).
6. Select Manu Rec. Mode and select Line Mode.
NOTE - The AAA batteries are used as a back up when the TR600 is not
connected to a power source.
8
C. LINE MODE RECORDING SETTINGS
Once in Line Mode, the TR600 is ready to start recording calls. But
First, select your recording mode; either manual or voice activation mode.
Manual Recording Mode
In this mode, you will initiate recording by pressing the record/stop
button on the TR600. To turn this mode on, follow the steps below:
1. Enter the Settings Menu and select Recording Settings.
2. Select Auto / Manual Rec and select MANUAL
3. To record a phone call, press the RECORD button on the TR600 to start
recording
4. To stop recording press the STOP button.
Auto Recording Mode
In this mode, the TR600 automatically begins recording when a call is
made or received; it stops recording when the call is completed.
1. Enter the Settings Menu and select Recording Settings.
2. Select Auto / Manual Rec and select AUTO
NOTE - TRIG (Trigger) mode also known as Voice Activation mode
will not work in line mode. You can also change additional settings in
Recording settings menu. (See section 6)
4Record On Digital, IP, and
Multi-line Phones
This section outlines how to properly hook-up the TR600 to record on
Digital, IP, and Multi-line Phones.
NOTE - The TR600 will need to be in Handset Mode.
9
In the diagram above, notice the connector size difference on the wall jack
(the wall jack connector for the IP phone is a larger Ethernet cable type).
A. CONNECT THE TR600
1. Connect wall jack to phone base - Run the phone line from the wall jack
to your phone base.
2. Connect phone base to the TR600 - Run the phone line from the phone
base to the line handset port on the side of the TR600.
3. Connect TR600 to the handset - Run the phone line from the phone
line handset port on the side of the TR600 to the handset.
10
B. ENTER HANDSET MODE
1. Make sure the SD card is inserted & AAA batteries are installed
2. Plug the TR600 into a wall outlet using the provided cord & AC adapter
3. Make sure the source switch on the side of the TR600 is slid to the
PHONE position.
4. Press the right select key to enter settings
9. Select Recording Settings.
10. Enter Manu Rec. Mode and select Handset Mode.
NOTE - The AAA batteries are used as a back up if the TR600 loses power
or is not connected to a wall power outlet
C. HANDSET MODE SETTINGS & OPERATION
Once in Handset Mode, the TR600 is ready to start recording calls. But
First, select your recording mode; either manual or voice activation mode.
NOTE - The auto recording mode (used in line mode) will not work in
Handset Mode. To record calls automatically in handset mode you will
need to turn on voice activation mode.
Manual Recording Mode
In this mode, you will initiate recording by pressing the record/stop
button on the TR600. To turn this mode on, follow the steps below:
1. Enter the Settings Menu and select Recording Settings.
2. Select Auto / Manual Rec and select MANUAL
3. To record a phone call, press RECORD button on the TR600 to start
recording
4. To stop recording press the STOP button.
Voice Activation Mode (automatically record):
In this mode, the TR600 will begin recording when sound is detected on
the phone line. Using this mode will allow your TR600 to record your calls
automatically in Handset Mode.
1. Enter the Settings Menu and select Recording Settings.
Other manuals for TR600
2
Table of contents
