RCA Pro809 User manual

USER‘S

GUIDE

Pro809

Table of Contents.........1

Optional Accessories...2

First-Time Operation....8

Remote Control .........15

Powering Your Camcorder

Recording Features....26

Playback...................52

Trouble Checks..........56

Care and Maintenance58

Specifications............60

Limited Warranty ......61

Index........................62

CAMCORDER

SAFETY PRECAUTIONS

Product Registration

Please fill out the product registration card and return it immediately. Returning this

card allows us to contact you if needed.

Keep your sales receipt to obtain warranty parts and service and for proof of

purchase. Attach it here and record the serial and model numbers in case you ever

need them. The numbers are located on the bottom of your camcorder.

Model No: Pro809

Serial No:

Purchase Date:

Purchased From:

Your video camcorder’s AC adapter/charger will operate on 100-240

volts AC, 50/60 Hz, and has a polarized plug. Because one blade of

the plug is wider than the other, the plug fits in the wall socket only

one way. Do not defeat the safety feature of this plug. If you need an

extension cord, use a polarized extension cord.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE

INSIDE. IF YOU SPILL LIQUID ON THE CAMCORDER OR

ADAPTER/CHARGER, DISCONNECT THE AC ADAPTER/CHARGER’S POWER

CORD TO PREVENT POSSIBLE FIRE OR SHOCK HAZARD AND CONSULT

AUTHORIZED SERVICE PERSONNEL. MOISTURE CAN DAMAGE

INTERNAL PARTS. REFER ALL SERVICE TO AUTHORIZED RCA

CAMCORDER SERVICENTER PERSONNEL ONLY.

CAUTION: READ “IMPORTANT SAFETY INSTRUCTIONS FOR AC

ADAPTER/CHARGER” ON THE NEXT PAGE BEFORE USING THE AC

ADAPTER/CHARGER.

CAUTION: MAINTAIN ELECTRICAL SAFETY. POWERLINE-OPERATED

EQUIPMENT OR ACCESSORIES CONNECTED TO THIS UNIT SHOULD BEAR

THE UL LISTING MARK OR, IF PURCHASED AND USED IN CANADA, THE

CSA CERTIFICATION MARK ON THE ACCESSORIES THEMSELVES AND

SHOULD NOT HAVE BEEN MODIFIED SO AS TO DEFEAT THE SAFETY

FEATURES. THIS WILL HELP AVOID ANY POTENTIAL HAZARD FROM

ELECTRIC SHOCK OR FIRE. IF IN DOUBT, CONTACT QUALIFIED SERVICE

PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD,

DO NOT EXPOSE CAMCORDER OR AC ADAPTER/

CHARGER TO RAIN OR MOISTURE.

CAUTION: AVOID OPERATING YOUR CAMCORDER IMMEDIATELY AFTER

MOVING IT FROM A COLD LOCATION TO A WARM LOCATION. GIVE THE

CAMCORDER 1-1/2 TO 2 HOURS TO REACH A STABLE TEMPERATURE BEFORE

INSERTING A VIDEO CASSETTE. WHEN MOVED FROM A COLD AREA TO A

WARM LOCATION, MOISTURE MAY CONDENSE ON THE HEAD DRUM INSIDE

THE MACHINE. THIS MOISTURE COULD CAUSE THE TAPE TO STICK TO THE

HEADWHEEL AND DAMAGE THE HEADWHEEL OR TAPE.

The symbol of a lightning

flash within a triangle is

intended to alert the user

to the presence of

uninsulated “dangerous voltage” within

the product’s enclosure and which may

be of sufficient magnitude to constitute

a risk of electric shock.

An exclamation point

within a triangle is

intended to alert the user

to the presence of

important operating and maintenance

(service) instructions in the literature

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MISE EN GARDE

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

SAFETY PRECAUTIONS (continued)

iii

Before using the AC adapter/charger,

read all instructions and cautionary

markings on (1) AC adapter/charger,

(2) battery, and (3) product using battery.

Caution: To reduce risk of injury,

charge only rechargeable batteries type

AV608, AV8MM, or AV8MSH. Other

types of batteries may burst causing

personal injury and damage.

Do not expose the adapter/charger to

moisture of any kind.

Use of an attachment not recommended

or sold by the battery charger

manufacturer may result in a risk of fire,

electric shock, or injury to persons.

To reduce risk of damage to electric plug

and cord, pull out the cord with the plug

rather than the cord when disconnecting

the adapter/charger from the wall outlet.

Make sure the cord is located so that it

will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

Use of an improper extension cord could

result in a risk of fire and electric shock.

If an extension cord must be used, make

sure that:

1. Pins on the plug of the extension cord

are the same number, size, and shape

as those of the plug on the

adapter/charger.

2. Extension cord is properly wired and

in good electrical condition, and

3. Wire size below is met:

Minimum Length of Extension

AWG Size Cord (Feet)

18 Equal to or less

than 100

16 Equal to or less

than 150

Do not operate adapter/charger with a

damaged cord or plug. Replace it

immediately.

Do not operate adapter/charger if it has

received a sharp blow, been dropped, or

otherwise damaged in any way. Take it

to a qualified serviceman.

Do not disassemble adapter/charger.

Take it to an Authorized RCA

Camcorder Servicenter when service or

repair is required. Incorrect reassembly

may result in a risk of electric shock.

To reduce risk of electric shock, unplug

adapter/charger from outlet before

attempting any maintenance or cleaning.

Be sure to save these operating

instructions for future reference.

IMPORTANT SAFETYINSTRUCTIONS

CAUTION: FCC REGULATIONS STATE THAT ANY UNAUTHORIZED

CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE

USER’S AUTHORITY TO OPERATE IT.

CAUTION: THE UNAUTHORIZED RECORDING OF TELEVISION

PROGRAMS AND OTHER MATERIALS MAY INFRINGE THE RIGHTS OF

OTHERS.

Important Safety Instructions for AC Adapter/Charger

In addition to the careful attention

devoted to quality standards in the

manufacture of your product, safety

is a major factor in the design of

every instrument. However, safety is

your responsibility too.

These pages list important

information that will help to assure

your enjoyment and proper use of a

camcorder, adapter/charger, and

accessory equipment. Please read

them carefully before operating your

products.

Installation

1. Read and Follow Instructions—

All the safety and

operating instruc-

tions should be read

before the product is

operated. Follow all

operating

instructions.

2. Retain Instructions—The safety and

operating instructions should be

retained for future reference.

3. Heed Warnings—Comply with all

warnings on the product and in the

operating instructions.

4. Polarization—This product is

equipped with a polarized alternating-

current line plug (a plug having one

blade wider than the other). This plug

will fit into the power outlet only one

way. This is a safety feature. If you

are unable to insert the plug fully into

the outlet, try reversing the plug. If

the plug still fails to fit, contact your

electrician to replace your obsolete

outlet. To prevent electric shock, do

not use this polarized plug with an

extension cord, receptacle, or other

outlet unless the blades can be fully

inserted without blade exposure. If

you need an extension cord, use one

with a polarized plug.

5. Power Sources—This product should

be operated only from the type of

power source indicated on the

marking label. If you are not sure of

the type of power supply to your

home, consult your dealer or local

power company. For products

intended to operate from battery

power, or other sources, refer to the

operating instructions.

6. Overloading—Do not overload wall

outlets, extension cords, or integral

convenience receptacles as this can

result in a risk of fire or electric shock.

Overloaded AC outlets, extension

cords, frayed power cords, damaged

or cracked wire

insulation, and

broken plugs are

dangerous. They

may result in a

shock or fire

hazard.

Periodically examine the cord, and if

its appearance indicates damage or

deteriorated insulation, have it

replaced by your service technician.

7. Power-Cord Protection—Power-

supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or

against them, paying particular

attention to cords at plugs,

convenience receptacles, and the point

where they exit from the product.

IMPORTANT SAFEGUARDS

(continued on next page)

8. Ventilation—Slots and openings in

the products are provided for

ventilation to ensure reliable

operation of the product and to

protect them from overheating.

These openings must not be blocked

or covered. The openings should

never be blocked by placing the

product on a bed, sofa, rug, or other

similar surface. This product should

not be placed in a built-in

installation such as a bookcase or

rack unless proper ventilation is

provided or the product

manufacturer’s instructions have

been followed.

9. Attachments—Do not use

attachments unless recommended by

the product manufacturer as they

may cause hazards.

10. Water and Moisture—Do not use

this product near water—for

example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet

basement, or near a swimming pool

and the like.

11. Accessories—Do not place this

product on an unstable cart, stand,

tripod, bracket, or table. The

product may fall, causing serious

injury to a child or adult as well as

serious damage to the product. Use

this product only with a cart, stand,

tripod, bracket, or table

recommended by the manufacturer

or sold with the product. Any

mounting of the product should

follow the manufacturer’s

instructions and use a mounting

accessory recommended by the

manufacturer.

11AA product and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the product and

cart combination to overturn.

IMPORTANT SAFEGUARDS (continued)

Caution: Maintain electrical

safety. Powerline operated

equipment or accessories connected

to this unit should bear the UL

listing mark or CSA certification

mark on the accessory itself and

should not be modified so as to

defeat the safety features. This will

help avoid any potential hazard

from electrical shock or fire. If in

doubt, contact qualified service

personnel.

(continued on next page)

12. Outdoor Antenna Grounding—If

an outside antenna or cable system is

connected to the product, be sure the

antenna or cable system is grounded

so as to provide some protection

against voltage surges and built-up

static charges. Article 810 of the

National Electrical Code,

ANSI/NFPA No. 70 (Section 54 of

Canadian Electrical Code, Part 1)

provides information with respect to

proper grounding of the mast and

supporting structure, grounding of

the lead-in wire to an antenna-

discharge unit, size of grounding

conductors, location of antenna-

discharge unit, connection to

grounding electrodes, and

requirements for the grounding

electrode. See example below as per

National Electrical Code,

ANSI/NFPA 70.

Example of Antenna Grounding

13. Power Lines—An outside antenna

system should not be located in the

vicinity of overhead power lines,

other electric light or power circuits,

or where it can fall into such power

lines or circuits. When installing an

outside antenna system, extreme

care should be taken to keep from

touching or approaching such power

lines or circuits as contact with them

might be fatal. Installing an outdoor

antenna can be hazardous and should

be left to a professional antenna

installer.

Use

14. Cleaning—Unplug this product

from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for

cleaning.

15. Object and Liquid Entry—Never

push objects of any kind into this

product through openings as they

may touch dangerous voltage points

or “short-out” parts that could result

in a fire or electric shock. Never

spill liquid of any kind on the

product.

IMPORTANT SAFEGUARDS (continued)

ANTENNA

LEAD IN

WIRE

GROUND CLAMP

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC SERVICE

EQUIPMENT

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

(continued on next page)

vii

16. Lightning—For added protection

for this product during a lightning

storm, or when it is left unattended

and unused for long periods of time,

unplug it from the wall outlet and

disconnect the antenna or cable

system. This will prevent damage to

the product due to lightning and

power line surges.

Service

17. Servicing—Do not attempt to

service this product yourself as

opening or removing covers may

expose you to dangerous voltage or

other hazards. Refer all servicing to

qualified service personnel.

18. Conditions Requiring Service—

Unplug this product from the wall

outlet and refer servicing to qualified

service personnel under the

following conditions.

A.When the power-supply cord or

plug is damaged.

B. If liquid has been spilled, or

objects have fallen into the

product.

C. If the product has been exposed to

rain or water.

D.If the product does not operate

normally by following the

operating instructions. Adjust

only those controls that are

covered by the operating

instructions. Improper

adjustment of other controls may

result in damage and will often

require extensive work by a

qualified technician to restore the

product to its normal operation.

E. If the product has been dropped in

any way.

F. When the product exhibits a

distinct change in performance—

this indicates a need for service.

19. Replacement Parts—When

replacement parts are required, have

the service technician verify that the

replacements he uses have the same

safety characteristics as the original

parts. Use of replacements specified

by the product manufacturer can

prevent fire, electric shock, or other

hazards.

20. Safety Check—Upon completion of

any service or repairs to this product,

ask the service technician to perform

safety checks recommended by the

manufacturer to determine that the

product is in safe operating

condition.

21. Wall or Ceiling Mounting—The

product should be mounted to a wall

or ceiling only as recommended by

the manufacturer.

22. Heat—The product should be

situated away from heat sources

such as radiators, heat registers,

stoves, or other products (including

amplifiers) that produce heat.

IMPORTANT SAFEGUARDS (continued)

Table of Contents

Product Registration ............................i

Safety Precautions...........................i-vii

Optional Accessories ........................2-7

• Accessory Order Form.................5-7

First-Time Operation.....................8-14

Remote Control ............................15-17

Powering Your Camcorder .........18-23

Video Cassettes.............................24-25

Recording Features

• Display On/Off Feature.................26

• Quick Review................................26

• Edit Search....................................26

• Tally Light ....................................26

• Tape Positioning ...........................27

• Microphone...................................27

• Automatic Iris and White

Balance.....................................27

• Flying Erase Head.........................27

• Date and Time Displays ..........28-30

• Electronic Viewfinder...................31

• Displays in Viewfinder............32-33

•SCENE SELECT AE Modes..........34

• Backlight.......................................35

• Zooming .......................................36

• Fading In and Out of Scenes.........37

• Focusing Your Camcorder.......38-39

• Digital Special Effects ..................40

• Time Counter................................41

• Titler ........................................42-43

• Edit Insert Using the

Camcorder ..........................44-45

• Edit Insert From a Monitor

TV or VCR .........................46-47

• Recording from VCR or TV

Monitor...............................48-49

Attaching the Shoulder Strap...........50

Recording and Traveling Tips..........51

Playback

• Viewfinder Playback and

Playback Features

• Viewfinder Playback ...............52-53

• Playback Features....................52-53

• Stop-Action Pause................52-53

• Visual Searching ..................52-53

• Playback on TV (or VCR) Using

AUDIO/VIDEO IN Jacks ..54-55

Trouble Checks.............................56-57

Care and Maintenance.................58-59

Specifications......................................60

Limited Warranty..............................61

Index (Alphabetical).....................62-63

VCC1000 Video Color Control Center

The VCC1000 is two accessories in one.

The color control center allows you to

adjust the color intensity, tint, white

balance, and sharpness of tapes being

dubbed. This is especially helpful when

the original tape was produced in poor

lighting conditions or poor color settings.

The second feature – the character

generator – lets you create titles that can

be recorded on your tapes. This lets you

add a professional and/or personal touch

to your home videos.

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity and adding to

the fun of using your 8mm camcorder. These pages have a selection of accessories to

help make your memorable moments look and sound even better.

These accessories are designed to make the process of recording and watching your

videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free ordering or by

using the order form on page 5.

All specifications and descriptions of accessories are subject to change without notice.

AC025A Soft Carrying Case

Custom compact soft case designed

especially to provide protection and utility

for your 8mm camcorder and most

accessories. Rugged fabric lined with soft

non-abrasive material and generous

padding. Has three outside pockets with

storage for lens filters, adapters, batteries,

and tapes.

Table of contents

Other RCA Camcorder manuals

RCA

RCA Small Wonder EZ4000 series User manual

RCA

RCA EZ219BK Quick start guide

RCA

RCA EZ300HD - Small Wonder Camcorder User manual

RCA

RCA Small Wonder EZ2100 series User manual

RCA

RCA EZ217BL User manual

RCA

RCA CC4271 User manual

RCA

RCA Small Wonder EZ3100 Series Quick start guide

RCA

RCA Small Wonder EZ101 User manual

RCA

RCA Autoshot CC6272 User manual

RCA

RCA Small Wonder EZ1010 Series User manual

RCA

RCA EZ209HD - Small Wonder Camcorder Instruction Manual

RCA

RCA Small Wonder EZ1000 series Instruction Manual

RCA

RCA CC4362 User manual

RCA

RCA EZ205 Small Wonder User manual

RCA

RCA EZ101 Small Wonder User manual

RCA

RCA CC9360 User manual

RCA

RCA Small Wonder EZ1010 Series User manual

RCA

RCA Small Wonder EZ3100 Series Instruction Manual

RCA

RCA EZ2120BK Quick start guide

RCA

RCA CC6151 - VHS-C Camcorder User manual

RCA

RCA CC645 User manual

RCA

RCA CC8251 User manual

RCA

RCA Small Wonder EZ2100 series User manual

RCA

RCA CC6262 User manual

Popular Camcorder manuals by other brands

Toshiba

Toshiba CAMILEO Z100 user guide

Panasonic

Panasonic NV-VS40B operating instructions

Canon

Canon RC 260 instructions

Sony

Sony Handycam DCR-DVD7E operating guide

Brinno

Brinno TimeLapse TLC200 user manual

JVC

JVC GR-SXM68AC Schematic diagram

Panasonic

Panasonic AG-HMC152EN operating instructions

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p user guide

MYDLINK

MYDLINK DCS-6100LH Quick installation guide

Sony

Sony video Hi8 Handycam CCD-TR555 operating instructions

SECURECOM

SECURECOM V-5014B installation guide

Panasonic

Panasonic HDC-SD100 operating instructions

Sharper Image

Sharper Image U-VIDEO instruction manual

JVC

JVC AA-V15EG instruction manual

Canon

Canon LEGRIA HV40 instruction manual

Sony

Sony Handycam DCR-VX2000 Service manual

Panasonic

Panasonic NVM40 Service manual

ATIK Cameras

ATIK Cameras Horizon manual