RCA RMANT1450 User manual
RMANT1450 / RMANT1450BF /
RMANT1450BFV /RMANT1450BR
Amplifi ed Flat Multi-Directional
Indoor Antenna
Antena multidireccional plana amplificada para interiores
User’s Guide
Guía del Usuario
Congratulations on your purchase of the Amplified Flat Multi-Directional Indoor Antenna.
With this contemporary antenna, rabbit ears are a thing of the past. This sleek, attractive
antenna features the most advanced technology, including a patented engineering design that
provides excellent reception for both analog and digital TV broadcasts.
Multi-Directional Antennas
A multi-directional antenna is able to receive signals from any direction. Useful for both
analog and digital reception, the antenna looks great, facilitates optimal reception, and
requires very little space. The patented multi-directional technology ensures that the
antenna does not need to be adjusted according to the location of the transmitting signal.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
2
English
Antenna Features
The Amplified Flat Multi-Directional Indoor Antenna is packed with features that make
it as functional as it is attractive. Because the antenna is multi-directional, there is no need
to constantly turn the antenna to improve reception. And, with its compact footprint, the
antenna is so unobtrusive, you can hang it on the wall, stand it up or lay it flat. Its attractive
design complements any décor. The antenna:
• Features a removable amplifier to optimize reception of local standard definition and
high definition signals
• Outperforms traditional antennas due to patented design
• Eliminates constant adjustments with multi-directional reception pattern
• Gets great reception in any position—lying flat, hanging, or standing
• Takes up minimal space
• Features a modern, contemporary look
Antenna Hardware
Before attempting to use your antenna, please remove all parts from the box and read the
instructions carefully The antenna package includes the following items:.
1 Flat Multi-Directional Antenna with Built-In 6’ Coaxial Cable
1 Amplifier Insert with Built-In Coaxial Cable
Removable Foot Stand
3
English
Setting Up the Antenna
Find the best location for the antenna
Before you connect the antenna, determine the best spot in your home for optimum
reception. Visit www.antennaweb.org to see where your local broadcasts are coming from.
Then, try as much as possible to avoid obstructions between these transmitters and your
antenna.
Because of its amplification and multi-directional capabilities, the antenna receives UHF,
VHF, and local high-definition broadcasts, providing quality reception from most locations.
Note: The antenna may work well sitting on your TV or other components. However,
because electronic components can sometimes interfere with the antenna’s reception, you
might notice an effect on the antenna’s performance. Likewise, placing the antenna on
a metal surface may interfere with reception. If the antenna isn’t performing as well as
expected, try moving it away from the component or placing it on another surface. Then,
re-scan for channels on your TV or converter box.
Positioning the Antenna
After locating the optimal position for your antenna, choose from one of three options:
•Lay the antenna flat The antenna has raised feet on its bottom to prevent scratching of
furniture. Make sure you place the antenna on a flat, level surface.
Note: This is the position that usually gives optimal performance.
•Hang the antenna The back of the antenna antenna has two mounting holes that can
be used for hanging. Place both holes over screws inserted in your wall.
•Stand the antenna upright The antenna comes with a removable stand. Simply place
the antenna in the stand to prop the antenna in an upright position.
4
English
ANT1450
Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
To connect the antenna with the
amplifier directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna built-in cable to
the input jack of the amplifier.
3. Connect the amplifier’s built-in cable to
the antenna input on your TV.
4. Plug the amplifier’s power cord into an
electrical outlet.
Important: This power unit is intended to be
correctly oriented in a vertical or floor mount
position.
5. Re-scan for channels on your TV.
2
To connect the antenna without the
amplifier directly to your TV:
1. Make sure your TV is turned off.
2. Connect the antenna’s built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
Connecting the Antenna
You can use the antenna with or without its amplifier, depending on which connection gives
you the best signal. Try using the amplifier first. If you notice that you’ve lost channels that
you normally receive, try connecting without the amplifier.
You can connect the antenna directly to your TV or use it with a converter box.
3 4
5
Built-In
Coaxial Cable
ANT1450
TV
2
3
antenna
antenna
5
English
To connect the antenna with the
amplifier to a converter box:
1. Make sure your converter box is turned
off.
2. Connect the antenna’s built-in cable to
the input jack of the amplifier.
3. Connect the amplifier’s cable to the
antenna input on the converter box.
4. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b.Coaxial cable connection: Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
5. Plug the amplifier’s power cord into an
electrical outlet.
Important: This power unit is intended to be
correctly oriented in a vertical or floor mount
position.
6. Re-scan for channels on your converter
box.
Converter Box
Coaxial
Cable
Audio/Video
Cables
Built-In
Coaxial Cable
ANT1450
TV
–or–
Amplifier
Insert
ANTENNA
TV/STB
4a
2
4b
35
6
antenna
6
English
To connect the antenna without the
amplifier to a converter box:
1. Make sure your TV is turned off.
2. Connect the antenna’s built-in coaxial
cable to the antenna input on your
converter box.
3. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b.Coaxial cable connection: Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
4. Re-scan for channels on your converter
box.
Notes: See your converter box’s owner’s
manual for more detailed connection
instructions. For additional information
about setting up your converter box, visit
www.keepmytv.com
Converter Box
Coaxial
Cable
Audio/Video
Cables
Built-In
Coaxial Cable
ANT1450
TV
–or–
3a
2
3b
4
antenna
7
English
Painting Your Antenna
You can paint the antenna to match your décor. Use only non-metal-based interior paint.
Coaxial Cable Installation Precautions
• Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause
shorts and can change a cable’s impedance.
• Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds
during installation. After installation, make sure there is no tension on the cable.
• Use only round-headed staples. Any clamps or securing devices used with coax should
grip the cable evenly about the circumference without crushing the cable. Flat staples can
damage the coaxial cable.
• Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep
the cable away from heating vents and water heaters.
This manual suits for next models
3
Table of contents
Other RCA Antenna manuals
RCA
RCA ANT1750F User manual
RCA
RCA ANT301R Use and maintenance manual
RCA
RCA ANT537 - TV Antenna - Indoor User manual
RCA
RCA ANT111R Use and maintenance manual
RCA
RCA ANT1600 - TV Antenna - Indoor User manual
RCA
RCA ANT111R User manual
RCA
RCA ANT3038XR User manual
RCA
RCA CANT1400F User manual
RCA
RCA ANT1050 - HDTV / TV Parts list manual
RCA
RCA ANT705Z User manual
RCA
RCA ANT1268E User manual
RCA
RCA ANT1750E User manual
RCA
RCA BPA-10 Guide
RCA
RCA ANT1000 - Digital Flat Passive Ultra-Slim-Profile... Parts list manual
RCA
RCA ANT1450 - HDTV / TV User manual
RCA
RCA ANT850E1 User manual
RCA
RCA ANT111 - Basic Indoor Antenna User manual
RCA
RCA VH126N Service manual
RCA
RCA Satellite TV Antenna Assembly instructions
RCA
RCA ANT301 - HDTV / TV User manual
Popular Antenna manuals by other brands
Alfa Network
Alfa Network APA-L01 Specifications
Naval
Naval PR-422CA Operation manual
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series manual
TERK Technologies
TERK Technologies TV44 owner's manual
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK quick start guide
HP
HP J8999A instructions
CommScope
CommScope CMAX-OMFX-43M-I53 Installation instruction
Ramsey Electronics
Ramsey Electronics DAP25 Kit assembly and instruction manual
COBHAM
COBHAM SAILOR 800 VSAT Replacement procedure
Trango Systems
Trango Systems AD900-9 Specification sheet
Steren
Steren ANT-100 user manual
Proxim
Proxim 5054-PA-23 quick start guide