Raytheon ST80 Manual
1
Chapter 2: Installation
ST80
Multiview
Operation & Setup
ST80MultiviewOperationandSetupManual 1
Package Contents
1. Multiview display head
2. Thumb nuts (2)
3. Threaded fixing studs (2)
4. White sun cover
5. SeaTalk cable
6. Installation template
7. Operation manual
8. Warranty card
9. Operation cue card
10. Display head installation guide
ST80MultiviewOperationandSetupManual2
Contents
Chapter 1: Introduction ............................................................. 5
Chapter 2: Operation ................................................................. 6
2.1 Basic Operation ............................................................6
Speed Key................................................................... 6
Speed Over Ground (SOG) ................................... 7
Velocity Made Good (VMG) ................................ 7
Temperature......................................................... 7
Maximum & Average Speed................................. 7
Log & Trip ........................................................... 7
Depth Key................................................................... 7
Depth ................................................................... 7
Minimum & Maximum Depth .............................. 7
Depth Offset ......................................................... 7
Shallow & Deep Alarms ....................................... 8
Anchor Alarms ..................................................... 8
Page Key..................................................................... 8
Heading ............................................................... 8
True & Apparent Wind ......................................... 8
Waypoint Range & Bearing .................................. 8
Ground Track & Tide ........................................... 8
Pilot ..................................................................... 9
Multiline .............................................................. 9
Illumination ................................................................ 9
Switching to System Mode ................................. 10
Switching to local Mode ..................................... 10
Exiting Illumination Adjustment ......................... 10
LCD Contrast ............................................................ 10
Resetting the LCD Contrast ................................ 10
2.2 General Operating Information ...................................10
Default Multiview Screen .......................................... 10
ST80MultiviewOperationandSetupManual 3
Quick Entry to Response ........................................... 10
Pop-Up Pilot ............................................................. 11
Alarms ...................................................................... 11
Cancelling Alarms .................................................... 12
Pilot Alarms .............................................................. 12
Man Overboard ......................................................... 13
2.3 Operation using a Remote Keypad ..............................13
Chapter 3: CodeLock Security................................................. 14
3.1 What is CodeLock? ....................................................14
3.2 Enabling CodeLock ....................................................15
3.3 Entering the Code Number from the Multiview ...........15
Chapter 4: User Setup.............................................................. 16
4.1 About this Chapter ......................................................16
Entering User Setup................................................... 16
Setup Menu ............................................................... 17
Response............................................................ 18
Display Formats ................................................. 18
Trend Indicator Thresholds ................................. 18
Pop-Up Pilot....................................................... 19
Default Display .................................................. 19
Keypad Beep ...................................................... 19
Contrast Adjustment ........................................... 20
Illumination Adjustment ..................................... 20
Alarm Control .................................................... 20
Multiline Selection ............................................. 21
Quitting User Setup ................................................... 22
Chapter 5: Problem Solving..................................................... 23
Chapter 6: EMC and Servicing Guidelines .............................. 24
Chapter 7: Specification ......................................................... 26
ST80MultiviewOperationandSetupManual4
ST80MultiviewOperationandSetupManual 5
Chapter 1: Introduction
The Multiview repeats information available on the SeaTalk bus.
The display head comprises of four keys (lamp, page, depth and
speed) dedicated to specific functions.
D3084-1
multiview
speed
depth
page
• The lamp key is used exclusively to adjust the LCD display
illumination.
• The depth and speed keys cycle pages of information related to the
speed and depth “chapters”.
• The page key cycles information such as: heading, true/apparent
wind, and waypoint range and bearing.
ST80MultiviewOperationandSetupManual6
Chapter 2: Operation
2.1 Basic Operation
The following flow charts show the displays assigned to thepage,
depth and speedkeys.
speed
D3085-1
speed
depth
page
SPEED OVER GROUND
VMG/TEMP
MAX/AVERAGE SPEED
LOG & TRIP
SPEED
depth
page
page
page
page
page
page
depth
depth
depth
depth
speed
speed
speed
RETURN TO SPEED
speed
MIN/MAX DEPTH
DEPTH OFFSET
SHALLOW & DEEP
ALARMS
ANCHOR ALARMS
DEPTH
RETURN TO DEPTH
TRUE/APP WIND
WAYPOINT RANGE &
BEARING
GROUND
TRACK/TIDE
PILOT
HEADING
MULTILINE
RETURN TO HEADING
Speed Key
Speed
• Boat speed can be displayed in KTS, MPH or KMH.
• Trend arrows replace the speed units (providing the trend option is
switched on) if the boat speed increases or decreases at a rate greater
than the value in User Setup.
ST80MultiviewOperationandSetupManual 7
Speed Over Ground (SOG)
• Speed over ground can be displayed in KTS, MPH or KMH.
VelocityMadeGood (VMG)
• VMG is only displayed if your system is configured for use with
sailing vessels.
• VMG can be displayed in one of the following KTS, MPH or KMH.
Temperature
• The sea temperature can be displayed in degrees C or F.
• The decimal place is lost if the temperature rises above 99.9.
Maximum & Average Speed
• The trip, log and maximum and average speed displays can be reset
by pressing and holding the speedkey for 4 seconds. The display
flashes during this process.
Log&Trip
• The Masterview is capable of displaying up to 5 trips at any one
time. However, the Multiview will only repeat the first of these trips.
Depth Key
Depth
• The depth is displayed in the units currently available on SeaTalk
(FT, M or FA).
• Trend arrows replace the depth units (providing the trend option is
switched on) if the depth increases or decreases at a rate greater than
the value in User Setup.
Minimum & Maximum Depth
• The maximum and minimum depth displays can be reset by
pressing the depth key for 4 seconds. The display flashes during
this process.
DepthOffset
• This display shows the depth transducer offset currently available on
SeaTalk.
• The offset can be either: waterline (positive offset), keel (negative
offset) or transducer (zero offset).
ST80MultiviewOperationandSetupManual8
Shallow & Deep Alarms
• This screen displays the current status (and value) assigned to the
shallow and deep alarms.
• The status of these alarms is identified by a tick (on) or cross (off).
Anchor Alarms
• This screen displays the current status (and value) assigned to the
anchor alarms.
• Once again, the status of these alarms is identified by a tick (on) or
cross (off).
Note: The shallow and deep anchor alarms cannot be adjusted on the
Multiview. Adjustments must be carried out on a Masterview.
Page Key
Heading
• The current heading is displayed in degrees M (mag.) or T (true).
True & Apparent Wind
• The wind direction is identified by a P (port) or S (starboard) next to
the wind angle.
Waypoint Range & Bearing
• The bearing to waypoint value is either M (magnetic) or T (true).
• The distance to waypoint is displayed in NM, SM or KM.
• The estimated time to arrival (TTG) is displayed in hours and
minutes or minutes and seconds.
• The cross track error (XTE) display consists of an error value (if
applicable) and a direction to steer indicator (arrows)
• The direction to steer indicator shows the direction to steer to return
to the correct waypoint bearing.
GroundTrack&Tide
• The course over ground (COG) and set values are displayed in the
true (T) or magnetic (M) units available on SeaTalk.
• The speed over ground (SOG) and rate values are displayed in the
current SeaTalk units.
Other manuals for ST80
1
Table of contents
Other Raytheon Marine Equipment manuals
Raytheon
Raytheon V8010 User manual
Raytheon
Raytheon 611EST User manual
Raytheon
Raytheon Standard 30 MF Operating manual
Raytheon
Raytheon Pathfinder ECDIS User manual
Raytheon
Raytheon V700 User manual
Raytheon
Raytheon V800 User manual
Raytheon
Raytheon 138-119 Operating manual
Raytheon
Raytheon V300 User manual
Popular Marine Equipment manuals by other brands
Clarion
Clarion GR10BT Owner's manual & installation manual
Raymarine
Raymarine Maxiview ST80 Owner's handbook
GUIDANCE MARINE
GUIDANCE MARINE 20- Series Installer's guide
Raymarine
Raymarine ST60 Tridata Owner's handbook
olympia electronics
olympia electronics ΒS-531/1/MAR quick start guide
Sonic
Sonic 2024 Operation manual