Raytheon Anschütz STD 22 Compact GYRO COMPASS User manual
Raytheon Anschütz GmbH
Postfach 1166
D -- 24100 Kiel
Germany
Tel+49--431--3019--0
Fax+49--431--3019--501
Email [email protected]
www.raytheon--anschuetz.de
3646/110--233.DOC010102 Edition: May 20, 2005
Revision: July 1, 2005
Revision: Sept. 1, 2005
Revision: Feb. 17, 2006
STD 22 Compact GYRO COMPASS
and
STD 22 GYRO COMPASS
Type 110 --233
Operator manual
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und
Mitteilung ihres Inhaltes nicht gestattet, soweit nicht ausdrücklich
zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz.
Copying of this document, and giving it to others and the use or
communication of the contents thereof, are forbidden without express
authority. Offenders are liable to the payment of damages.
Toute communication ou reproduction de ce document, toute
exploitation ou communication de son contenu sont interdites, sauf
autorisation expresse. Tout manquement à cette règle est illicite et
expose son auteur au versement de dommages et intérêts.
Sin nuestra expresa autorización, queda terminantemente prohibida la
reproducción total o parcial de este documento, así como su uso
indebido y/o su exhibición o comunicación a terceros. De los infractores
se exigirá el correspondiente resarcimiento de daños y perjuicios.
Operator manual Compass
STD 22
110--233
STD22 Compact and STD22
I3646/110--233NG001.DOC010102
Edition: May 20, 2005
TABLE OF CONTENTS Page
Declaration of Conformity
1 General 1.................................................................
1.1 STD 22 Compact Gyro Compass 3...........................................
1.1.1 STD 22 Compact Gyro Compass -- Scope of Supply 5..........................
1.1.2 STD 22 Compact Gyro Compass optional features 6............................
1.1.2.1 Quick Settling operator unit 6................................................
1.1.2.2 AC/DC Converter 121--062 7................................................
1.1.2.3 Additional Output Box 146--103 7.............................................
1.2 STD 22 Gyro Compass 8....................................................
1.2.1 STD 22 Gyro Compass -- Scope of Supply 10...................................
1.2.2 Optional features STD 22 Gyro Compass 11....................................
1.2.2.1 AC/DC Converter 121--062 11................................................
1.3 Technical data 12...........................................................
1.3.1 Mechanical data 12..........................................................
1.3.2 Electrical data 12............................................................
1.3.3 General Technical Data 13...................................................
2 Controls and Indicators on the Gyro Compass 14.............................
2.1 Switching on the STD 22 Compass 16.........................................
2.1.1 Indications on the compass during the heating stage 17..........................
2.1.2 Indications on the compass during the settling stage 18..........................
2.1.3 Overview of indications (digital display) during operation 19.......................
2.2 Heading correction 20.......................................................
2.2.1. Alignment error 20...........................................................
2.2.1.1 Procedure for setting the compass zero (A--error) 20............................
2.2.2 Speed error 23..............................................................
2.2.2.1 Speed error table 25.........................................................
3 Warning signals 29.........................................................
3.1 Warnings, their causes, and what to do 30......................................
3.1.1 Warning 1 ”Fan failure” 32.................................................
3.1.2 Warning 2 ”Heater failure” 33..............................................
3.1.3 Warning 3 ”Supporting liquid > 60 ˚C.” 33...................................
3.1.4 Warning 4 ”Supporting liquid level too low” 34................................
3.1.5 Warning 5 ”Voltage cut-off” 34.............................................
4 Alarm signalling (in the event of an error) 36.................................
5 Switching off the Gyro Compass 39.........................................
6 Maintenance 40............................................................
Operator manual
110--233
STD22 Compact and STD22
3646/110--233NG001.DOC010102 II Edition: May 20, 2005
Safety Information
Caution!
Maintenance and repair work should be carried out only by trained
and qualified staff who are well versed in national safety
regulations.
After the gyro compass has been switched off it is necessary to
wait at least 15 minutes before accessing the interior of the gyro
compass.
Otherwise the sphere could be damaged!
If no Raytheon repeater compass or other alarm indication device
is connected, the warnings and error messages are only displayed
visually on the compass.
In such case, the gyro has to be installed in such a way, that the
digital display can be monitored at all times -- see installation
instruction.
If warnings occur, the operation of the gyro compass is not
restricted. If the cause of the problem is rectified quickly, it is
possible to prevent the equipment from breaking down.
Please inform the authorised service staff.
When an error message appears, the heading is no longer
displayed at the compass; the heading is not followed up at a
connected heading receiver.
The compass must be repaired by well trained stuff.
Please note that all ships of 500 gross tonnage and upwards according
to SOLAS regulations must be equipped with a gyro compass.
The gyro compass must be operational. For this reason it is not allowed
to have a switched--off gyro compass during voyages.
A switched--off gyro compass during voyages could cause damage
to the gyrosphere.
Operator manual Compass
STD 22
110--233
STD22 Compact and STD22
III 3646/110--233NG001.DOC010102
Edition: Feb. 17, 2006
Caused by technical progress the PC--Boards of the
Gyro Compass are changed.
Due to that some pictures and/or procedures have been
changed.
Respective changes are marked with “E10”.
The AC supply voltage (ships mains) may drop out.
This leads to a restart of the gyrocompass and a new settling
stage.
The heading information during this settling stage has a
reduced accuracy (see section 2.1.2).
Therefore a continously supply with 24VDC should be guar-
anteed.
Operator manual
110--233
STD22 Compact and STD22
3646/110--233NG001.DOC010102 IV Edition: July 1, 2005
Intentionally left blank
Operator manual Compass
STD 22
110--233
STD22 Compact and STD22
V3646/110--233NG001.DOC010102
Edition: May 20, 2005
Operator manual
110--233
STD22 Compact and STD22
3646/110--233NG001.DOC010102 VI Edition: May 20, 2005
Operator manual Compass
STD 22
110--233
STD22 Compact and STD22
VII 3646/110--233NG001.DOC010102
Edition: Feb. 17, 2006
Operator manual
110--233
STD22 Compact and STD22
3646/110--233NG001.DOC010102 VIII Edition: Feb. 17, 2006
Other manuals for STD 22 Compact GYRO COMPASS
1
This manual suits for next models
1
Table of contents
Other Raytheon Anschütz Compass manuals
