Raritan T1900 User manual
LCD KVM Console (T1700/T1900)
User Guide
Release 1.1
Copyright © 2010 Raritan, Inc.
T1700_T1900-0E-v1.1-E
July 2010
255-37-0114-00
This document contains proprietary informatio
n that is protected by copyright. All rights reserved. No
pany
registered
pe® and Netscape Navigator® are registered trademarks of Netscape
Communication Corporation. All other trademarks or registered trademarks are the property of their
rs.
n
led and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential
harmful interference.
part of this document may be photocopied, reproduced, or translated into another language without
express prior written consent of Raritan, Inc.
© Copyright 2010 Raritan, Inc., CommandCenter®, Dominion®, Paragon® and the Raritan com
logo are trademarks or registered trademarks of Raritan, Inc. All rights reserved. Java® is a
trademark of Sun Microsystems, Inc. Internet Explorer® is a registered trademark of Microsoft
Corporation. Netsca
respective holde
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial installation. This equipment generates, uses, and ca
radiate radio frequency energy and if not instal
environment may cause
VCCI Information (Japan)
Raritan is not responsible for damage to this product resulting from accident, disaster, misuse, abuse,
-Raritan modification of the product, or other events outside of Raritan's reasonable control or not
rising under normal operating conditions.
non
a
iii
Contents
Important Safeguards v
What the Warranty Does Not Cover..............................................................................................v
Safety Instructions ........................................................................................................................ vi
Chapter 1 Introduction 1
Package Content ...........................................................................................................................1
T1700...................................................................................................................................1
T1900...................................................................................................................................1
Structure Diagram..........................................................................................................................2
Chapter 2 Installation 3
Before Installation..........................................................................................................................3
Rack-Mounting the LCD KVM Console .........................................................................................3
1. Installing the Rear L-bracket............................................................................................4
2. Aligning the Rear L-brackets...........................................................................................4
3. Fixing the LCD KVM Console into the Rack....................................................................5
How to Install "One Man" Installation Slides..................................................................................6
Installing the Front Mounting Ear x 2 pcs............................................................................7
Installing into Rack ..............................................................................................................7
Connecting to the KVM Switch via PS/2 Interface.......................................................................10
Connecting to the KVM Switch via USB Interface.......................................................................11
Connecting to the Server via PS/2 Interface ...............................................................................12
Connecting to the Server via USB Interface................................................................................12
Chapter 3 Operation 14
How to Use the LCD KVM Console.............................................................................................14
Touchpad Buttons .............................................................................................................15
Onscreen Display Operation .............................................................................................16
Onscreen Menu.................................................................................................................17
Contents
iv
How to Use the Slides..................................................................................................................18
Appendix A Standard Specifications 20
Specifications...............................................................................................................................20
Dimension....................................................................................................................................21
Appendix B Troubleshooting 22
Index 23
v
Read all these instructions carefully before you use the device. Save this
manual for future reference.
What the Warranty Does Not Cover
•Any product, on which the serial number has been defaced, modified
or removed.
•Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of
nature, unauthorized product modification, or failure to follow
instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation
or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
Important Safeguards
Important Safeguards
vi
Safety Instructions
•Unplug equipment before cleaning. Don'tuse liquidor spray detergent;
use a moist cloth.
•Keep equipment away from excessive humidity and heat. Preferably,
keep it in an air-conditioned environment with temperatures not
exceeding 40º Celsius (104º Fahrenheit).
•When installing, place the equipment on a sturdy, level surface to
prevent it from accidentally falling and causing damage to other
equipment or injury to persons nearby.
•When the drawer is in an open position, do not cover, block or in any
way obstruct the gap between it and the power supply. Proper air
convection is necessary to keep it from overheating.
•Arrange the equipment's power cord in such a way that others won't
trip or fall over it.
•If you are using a power cord that didn't ship with the equipment,
ensure that it is rated for the voltage and current labeled on the
equipment's electrical ratings label. The voltage rating on the cord
should be higher than the one listed on the equipment's ratings label.
•Observe all precautions and warnings attached to the equipment.
•If you don't intend on using the equipment for a long time, disconnect it
from the power outlet to prevent being damaged by transient
over-voltage.
•Keep all liquids away from the equipment to minimize the risk of
accidental spillage. Liquid spilled on to the power supply or on other
hardware may cause damage, fire or electrical shock.
•Only qualified service personnel should open the chassis. Opening it
yourself could irreparably damage the equipment and invalidate its
warranty.
•If any part of the equipment becomes damaged or stops functioning,
have it checked by qualified service personnel.
Introduction
Chapter 1
The User Guide introduces the Raritan LCD KVM Console, a 1U
rackmount LCD KVM drawer for use with the KVM switch or server in the
data center, server room or the like. There are two types of the product:
T1700 and T1900. These models are identical in almost every aspect
except that T1700 comes with a 17" LCD monitor and T1900 comes with a
19" one.
In This Chapter
Package Content.......................................................................................1
Structure Diagram .....................................................................................2
Package Content
Raritan LCD KVM Console comes with the standard parts shown in this
section. Check and make sure they are included and in good condition. If
anything is missing, or damaged, contact the supplier immediately.
T1700
1. LCD KVM drawer x 1 pc
2. Fasteners for rear L-bracket x 4 pcs
3. Rear mounting L-bracket x 1 pair
*T1700 series mounting depth-adjustable from 395 to 880mm
4. 3-in-1 KVM cable x 1 pc
5. Power cord x 1 pc
T1900
1. LCD KVM drawer x 1 pc
2. Rear mounting L-bracket x 1 pair
*T1900 series mounting depth-adjustable from 315 to 880 mm
3. Single or “one man” installation slides x 1 package
4. 3-in-1 KVM cable x 1 pc
5. Power cord x 1 pc
1
Chapter 1: Introduction
2
Structure Diagram
1. Carry handle to release the 2-pt lock
2. 2-point lock
3. LCD screen
4. LCD membrane
5. Adjustable rear mounting L-bracket
6. Micro switch for screen auto power off
7. Keyboard
8. Touchpad
Installation
Chapter 2
In This Chapter
Before Installation......................................................................................3
Rack-Mounting the LCD KVM Console.....................................................3
How to Install "One Man" Installation Slides .............................................6
Connecting to the KVM Switch via PS/2 Interface ..................................10
Connecting to the KVM Switch via USB Interface...................................11
Connecting to the Server via PS/2 Interface...........................................12
Connecting to the Server via USB Interface............................................12
Before Installation
•It is very important to locate the LCD KVM Console in a suitable
environment.
•The surface for placing and fixing the LCD KVM Console should be
stable and level or mounted into a suitable cabinet.
•Make sure the place has good ventilation, is out of direct sunlight,
away from sources of excessive dust, dirt, heat, water, moisture, and
vibration.
•Convenience for connecting the LCD KVM Console to the related
facilities should be well considered too.
Rack-Mounting the LCD KVM Console
There are three major steps to rack-mount the LCD KVM Console.
1. Install the rear L-bracket to the LCD KVM Console.
2. Align the rear L-brackets to a suitable length for the rack.
3. Fix the LCD KVM Console into the rack.
3
Chapter 2: Installation
4
1. Installing the Rear L-bracket
a. Install each rear L-bracket using two fasteners shown in the
diagram.
b. Leave the fasteners slightly loose.
2. Aligning the Rear L-brackets
a. Measure the front and rear mounting depth of the rack.
b. Align each rear L-bracket to a suitable length and tighten the
fasteners shown in the diagram.
This manual suits for next models
1
Table of contents
Other Raritan LCD Drawer manuals
Popular LCD Drawer manuals by other brands
Acnodes
Acnodes KD 8228 user manual
Ameriwood
Ameriwood 9524328PCOM manual
Kesseböhmer
Kesseböhmer TANDEM solo Mounting instructions
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series user manual
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Installation and operating instructions
NTI
NTI RACKMUX-V17-N Installation and operation manual
GRASS
GRASS DWD XP manual
StarTech.com
StarTech.com DuraView RACKCONS1701 instruction manual
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S installation instructions
Synergy Global Technology
Synergy Global Technology LCD1U17-44 user manual
Fujitsu
Fujitsu RC25 user manual
Acnodes
Acnodes RK 1000B installation guide