www.ramset.com.au 1300 780 063 5
Structural Steel
Solid or Hollow
Block
Horizontal Joints
only in Brick Walls
Solid Concrete and
Precast Concrete
SAFETY INSTRUCTIONS
DANGER 3
DANGER SAFETY INSTRUCTIONS
35(3$5$7,21)25)$67(1,1*
$FFHSWDEOH%DVH0DWHULDOV
7KHJDVSRZHUHG7WRROVDUHVXLWDEOH
IRUXVHLQWKHIROORZLQJ
EDVHPDWHULDOVRQO\
• Poured Concrete
• Structural Steel
•Concrete Block and Horizontal
Joints in Brick or Masonry Walls
1HYHUDWWHPSWWRIDVWHQLQWRDQ\RWKHU
W\SHRIPDWHULDO
)DVWHQLQJLQWRRWKHU
PDWHULDOVFDQFDXVHEOLQGQHVVRURWKHU
VHULRXVLQMXU\
1HYHUDWWHPSWWRIDVWHQLQWRYHU\KDUGRU
EULWWOHPDWHULDOVVXFKDVFDVWLURQWLOH
JODVVRUURFNRIDQ\W\SH
7KHVHPDWHULDOV
FDQVKDWWHUFDXVLQJWKHIDVWHQHUDQGRUEDVH
PDWHULDOIUDJPHQWVWRIO\IUHHDQGFDXVH
VHULRXVLQMXU\WRWKHWRRORSHUDWRUDQGRWKHUV
1HYHUIDVWHQLQWRDQ\EDVHPDWHULDOWKDW
GRHVQRWSDVVWKH&HQWHU3XQFKWHVW
)DLOXUHWRDVVXUHWKHVXLWDELOLW\RIWKHEDVH
PDWHULDOFDQUHVXOWLQVHULRXVLQMXU\WRWKH
H\HVRURWKHUERG\SDUWV
&HQWHU3XQFK7HVW
$/:$<6:($5$33529('(<(
3527(&7,21:+(13(5)250,1*7+,6
7(67
1. Always check the material being
fastened into for hardness before
attempting any fastening operation.
2. Using a fastener as a center punch,
strike the fastener against the work
surface using an average hammer
blow and check the results.
Center Punch Test Results
1. If the fastener point is flattened,
the material is too hard for a
powder actuated fastening.
2. If the fastener penetrates the material
easily, the material is too soft.
3. If the material cracks or shatters,
the material is too brittle.
4. If the fastener makes a small
indentation into the material, the
material is suitable for fastening.
InsulFast™T4
Owners Manual
