Rack Solutions 122-2448 User manual

4Post and 2Post Sliding Rails

for Cisco C210

Installation Instructions

Kit P/N: 122-2448

Patent(s) Pending

4Post

Page 2

2Post Center

Page 4

Page 2

4Post Installation Instructions

Kit Contents

Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder

Lugs with the keyholes in the Inner Rail, then slide toward the front of the server.

Install supplied M4 pan head screw as shown to secure inner rail to the chassis.

Repeat for the other side.

Kit Contents:

(2) Outer Rail (Left & Right)

(2) Inner Rail

(2) Rear Bracket (Left & Right)

Secure Hardware:

(2) 10-32 x .250 Truss Head Screw

(2) M4 x 6mm pan Head Screw

Mounting Hardware:

(8) 8-32 x .375 Flat Head Screw

(12) 8-32 x .500 Pan Head Screw

(8) 8-32 Keps Nut

(2) Retainer Plate (Left & Right)

(2) Mounting Plate

Rack Mount 8x:

(8) 10-32 x .500 Pan Head Screw

(8) 12-24 x .500 Pan Head Screw

(8) 12-24 x Square Nut

(8) 12-24 x Cage Nut

Rack Mount 4x:

(4) 10-32 x .500 Pan Head Screw

(4) 12-24 x .500 Pan Head Screw

(4) 12-24 x Square Nut

(4) 12-24 x Cage Nut

Step 2. Attach Rear Brackets: Attach the Rear Brackets to the Outer Rail Assemblies,

using included 8-32 at head screws and keps nuts. Ensure they are set to the

required "Mounting Depth".

Inner RailLug

Outer Rail

Rear Bracket

8-32 x.375 Flat Head Screws

8-32 Keps Nuts

M4 x 6mm Pan

Head Screw

4Post Installation Instructions

Page 3

Step 4. Install the equipment: Slide the equipment all the way in. Tighten the (3) Pan

Head Screws on the back of the left slide rail. Slide the equipment out about 8

inches and tighten the (3) Pan Head Screws on the front of the left slide rail.

Note: When tightening the loose rails, support the bottom of the server to ensure proper

rail adjustment.

Step 3. Attach the rails to the rack: Attach the Front and Rear of the rails to the 4Post

rack as shown below using supplied 8-32 Pan Head Screws on each side.

Repeat for the other side. Right side shown, Left side rail is labeled "L". Tighten

the front and rear Pan Head Screws on the right side rail. Leave the front and

rear Pan Head Screws on the left side rail slightly loose.

(6) 8-32 x.500 Pan Head Screws

Mounting Plate

Retaining Plate

10-32 x .250 Truss Head Screw

Outer Rail

(Labeled "R")

Front

Rear

Step 5. Secure equipment: Install the supplied 10-32 truss head screw as shown on both

sides of the equipment.

Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder

Lugs with the keyholes in the Inner Rail, then slide toward the front of the server.

Install supplied M4 pan head screw as shown to secure inner rail to the chassis.

Repeat for the other side.

2Post Center Installation Instructions

Step 2. Attach Rear Brackets: Attach the Rear Brackets to the Outer Rail Assemblies,

using included 8-32 at head screws and keps nuts. Ensure they are set to the

required "Mounting Depth".

Page 4

Step 3. Attach the rails to the rack: Attach the Front and Rear of the rails to the 2Post

rack as shown below using supplied 12-24 Pan Head Screws on each side.

Repeat for the other side. Right side shown, Left side rail is labeled "L". Tighten

the front and rear Pan Head Screws on the right side rail. Leave the front and

rear Pan Head Screws on the left side rail slightly loose.

Outer Rail (Labeled "R")

(6) 12-24 x .500 Pan Head Screw

Front Rear

Inner RailLug

M4 x 6mm Pan

Head Screw

Outer Rail

Rear Bracket

8-32 x.375 Flat Head Screws

8-32 Keps Nuts

2Post Center Installation Instructions

Step 4. Attach Retainer Bracket: Attach Retainer Bracket to the front of the outer rail as

shown below using the supplied 8-32 Pan Head Screws. Repeat for the other

side.

Step 5. Install the equipment: Slide the equipment all the way in. Tighten the (3) Pan

Head Screws on the back of the left slide rail. Slide the equipment out about 8

inches and tighten the (3) Pan Head Screws on the front of the left slide rail.

Note: When tightening the loose rails, support the bottom of the server to ensure proper

rail adjustment.

Retaining Plate

(3) 8-32 x .375 Pan Head Screws

Page 5

Step 6. Secure equipment: Install the supplied 10-32 truss head screw as shown on both

sides of the equipment.

10-32 x .250 Truss Head Screw

Outer Rail

Page 6

Page 7

Warranty Statement

Innovation First, Inc. warrants our products against defects in material and workmanship for a

period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to

repairing or replacing, at our option, any defective product.

2448

Table of contents

Other Rack Solutions Rack & Stand manuals

Rack Solutions

Rack Solutions 104-2411 User manual

Rack Solutions

Rack Solutions 124-2247 User manual

Rack Solutions

Rack Solutions 119-1752 User manual

Rack Solutions

Rack Solutions 104-2109 User manual

Rack Solutions

Rack Solutions 104-2324 User manual

Rack Solutions

Rack Solutions 111-1731 User manual

Rack Solutions

Rack Solutions 4UKIT-003BLK User manual

Rack Solutions

Rack Solutions 1USHL-003 User manual

Rack Solutions

Rack Solutions 101-5205 User manual

Rack Solutions

Rack Solutions 4Post User manual

Rack Solutions

Rack Solutions 5U User manual

Rack Solutions

Rack Solutions FORZA DESIGNS Elite Controller Wall Mount User manual

Rack Solutions

Rack Solutions 105-2670 User manual

Rack Solutions

Rack Solutions 1UKYB-126 User manual

Rack Solutions

Rack Solutions 2UKVM-125 User manual

Rack Solutions

Rack Solutions WALL-KYB-001 User manual

Rack Solutions

Rack Solutions Wall-Mount-PC User manual

Rack Solutions

Rack Solutions 104-5191 User manual

Rack Solutions

Rack Solutions VEX 111-6330 User manual

Rack Solutions

Rack Solutions 122-4818 User manual

Rack Solutions

Rack Solutions 122-3491 User manual

Rack Solutions

Rack Solutions RACK-117-MOBILE KIT User manual

Rack Solutions

Rack Solutions 104-2323 User manual

Rack Solutions

Rack Solutions 104-1965 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 