R82 Rabbit User manual
rabbit
TM
© 2010 R82 A/S. All rights reserved.
The R82 logo and the Rabbit are trademarks of R82 A/S.
12.2012 - rev.007
English user manual
G
B
2
G
B
GB CONTENTS
Safety ................................................................................ 4
Warranty ............................................................................ 4
Tools .................................................................................. 4
T-tool.................................................................................. 5
Ready for use .................................................................... 6
Angling of the centre bar ................................................... 7
Brakes ............................................................................... 7
Height adjustment of driving wheels.................................. 8
Mounting and adjustment of the foot plate ........................ 9
Mounting and adjustment of individual foot supports ...... 10
Spoke protectors ............................................................. 10
Mounting of flip-up sandals / heel supports..................... 11
Knee supports ................................................................. 11
Hinged knee supports...................................................... 12
Extra cushion................................................................... 12
Hip support, rear.............................................................. 13
Hip support, front............................................................. 14
Hip supports de-rotation .................................................. 14
Head support................................................................... 15
Tray and play box ............................................................ 16
Extension for centre bar, 8 cm......................................... 16
Chest support .................................................................. 17
"Pony" chest support ....................................................... 17
Abdominal support........................................................... 18
Product identification ....................................................... 19
Measurements................................................................. 20
Technical data.................................................................. 21
Producer.......................................................................... 21
Distributor ........................................................................ 21
Care and maintenance .................................................... 22
3
G
B
GB RABBIT
The Rabbit is a mobile standing frame providing users the possibility of moving
around and orientate oneself. The user will be in equal height as his or hers friends
and will have a good view.
Children with paresis or cerebral paralysis will find joy in using the Rabbit, and
children in Support Cast can easily be placed in it.
This user manual is a guide to assist in gaining the full benefits of the options of-
fered by the Rabbit. Therefore, we recommend you read this manual before using
the mobile standing frame.
Please note!
Rabbit is mainly for indoor use, but can be used outdoors. When used indoors
and moved from one room to another it is important to be aware of the fact that
obstacles e.g. doorsteps, may pose a risk of tilting. When used outdoors the surface
must be at and without obstacles, e.g. holes and drain traps, which may pose a
risk of tilting. Never leave the user unattended in this product.
4
G
B
GB
GB
GB
SAFETY
The Rabbit has earned the CE-mark. This certifies that it meets all relevant Euro-
pean safety requirements.
The durability of this product is 5 years when it is used on a daily basis. Hereafter
the product must be renovated (by R82 personnel) to extend the lifetime.
Remove the CE-mark, when re-building the product or when using other than
original R82 spare parts and fittings.
Check the strap before every use and replace any worn out parts before using
this product.
Never leave your child unattended in this product. Ensure constant supervision
by an adult. Incorrect use of the product, may cause serious injury to the user.
Ensure that the belt is securely fixed to the frame before every use.
Use only when all 6 wheels are mounted.
WARRANTY
R82 offers a 2-year warranty against defects in workmanship and materials and a
5-year warranty on breakage of the metal frame caused by defects in welds. The
warranty would be adversely affected if the customer’s responsibility of servicing
and/or daily maintenance is not carried out according to the guidelines and intervals
prescribed by the supplier and/or stated in the manual. For further information,
we refer to the R82 homepage/download. The warranty can only be sustained if
the R82 product is in use in the same country where it was purchased and if the
product can be identified by the serial number. The warranty does not cover ac-
cidental damage, including damage caused by misuse or neglect. The warranty
does not extend to non-durable parts, which are subject to normal wear and tear
and need periodic replacement. The warranty is null and void if non-original R82
parts/accessories are used, or if the product is repaired or altered by anyone other
than an authorised R82 representative or by trained personnel officially recogni-
sed by R82 for repair and maintenance of R82 products. R82 reserves the right
to inspect the product being claimed for and the relevant documentation before
agreeing to the warranty claim, and to decide upon whether to replace or repair
the defective product. It is the customer’s responsibility to return the item being
claimed for under warranty to the address of purchase. The warranty is given by
R82 or, subsequently, an R82 dealer.
TOOLS
Tools are delivered with the Rabbit: 5 & 6 mm allenkeys and 2 pcs. T-tools. This key
is used to perform some of the adjustments described in this manual.
5
A
G
B
T-TOOL
The T-tool (A) helps to maintain the square pla-
tes in the slot of the center bar, when mounting or
adjusting eg. knee supports, hip support etc.
Insert tool into slot, twist 90° and tip down to
support the plate.
GB
6
A
G
B
GB READY FOR USE
The Rabbit is delivered without accessories to
make it take up as little room as possible during
transportation. To assemble your Rabbit ready
for use, please follow the description below.
* Remove the Rabbit from the packaging
* Check if all tires run smoothly
* Check if the brakes work correctly. See
another page in this manual to adjust the
brakes.
The brake handles on both sides of the centre
bar has to be removed to be able to mount vari-
ous accessories. Follow the below description:
* Loosen the screw (A) using the enclosed 5
mm Allen key.
* Move the brake handles upwards and dis-
mount from the centre bar.
* Mount the desired accessories and remount
the brake handles. Fasten with the Allen
key.
The Rabbit is now ready for use and to receive
any accessories ordered.
Do not place an user in the Rabbit if it has
been standing in/exposed to sun. For the
safety and comfort of the user the Rabbit
must be moved away from the sun and
chilled before use.
Before mounting the accessories, we
advise removing the driving wheels.
Do not use without the driving wheels.
7
A
B
C
B
A
G
B
GB
GB
ANGLING OF THE
CENTRE BAR
The angle of the centre bar / standing frame is
adjustable either with or without a user in the
Rabbit.
* Pull out the security lock "(A)" to be able to
angle the centre bar / standing frame. Turn
the handle (B) to desired angle. Let go of
the security lock (A) to maintain the desired
position.
BRAKES
Brakes are mounted on the Rabbit on both sides
of the frame. Pull up the handle (A) to activate
the brake.
The brakes are used during transportation or
when the child is standing still - playing, maybe
with a tray/play box mounted.
The brake can be adjusted to brake either
more or less. Turn the cable tightener (B) with
the clock to brake less and against the clock to
brake more. Fasten the lock-nut (C) to maintain
the desired position.
We recommend not to lock the wheels, if
the Rabbit for any reason is not used for a
longer period.
8
B
A
CD
E
G
B
HEIGHT
ADJUSTMENT OF
DRIVING WHEELS
The height of the driving wheels can be adjusted
to fit the desired height-to-floor on the small
casters. The Rabbit is delivered with max. 1 cm
height-to-floor on the casters.
Follow the description below to adjust the height
on the driving wheels.
* Dismount the driving wheels
* Dismount the drum brake (A) using a 3 mm
Allen key and 8 mm wrench.
* Dismount the wheel suspention (B) using a
17 and 24 mm wrench.
* Mount the small plate (C) in the desired
position. Mount bolts and nuts as shown on
the drawing. Fasten with a 17 and 24 mm
wrench. Fasten the lock-nut (D) with a 24 mm
wrench.
Please be aware that the small plate (C)
is mounted at the same height on both
sides of the frame. Further the small dent
in the plate must be either up or down in
both sides.
* Mount the drum brake (E) in the holes in the
plate depending on where the wheel suspen-
sion is mounted. Use a 3 mm Allen key and
a 8 mm wrench to mount the drum brake.
Mount bolts, washers and nuts as shown on
the drawing.
Please be aware that the heigh-to-floor on
the small casters not exceed 15 mm
GB
9
B
C
B
A
G
B
GB MOUNTING AND
ADJUSTMENT OF
THE FOOT PLATE
Follow the description below to mount the foot
plate correctly. We recommend to dismount
the square plates from the foot plate before
mounting.
Tip!
In general we recommend to mount all acces-
sories from the top of the centre bar which is why
the lower accessories must be mounted first.
* The square plates (A) from the foot plate is
mounted in the slots on the centre bar. Let
them slide all the way down.
* Mount the foot plate using the enclosed bolt
(B) and the 6 mm Allen key.
Turn the handle (C) to angle adjust the foot
plate.
Loosen the bolts (B) in both sides of the centre
bar and height adjust the foot plate. Fasten the
bolts in the desired position.
10
A
E
2
1
3
B
C
D
G
B
GB MOUNTING AND
ADJUSTMENT OF
INDIVIDUAL FOOT
SUPPORTS
Follow the description below to mount the
foot supports correctly. The foot supports are
mounted seperately and can be adjusted indi-
vidually.
* The square plates mounted on the foot sup-
port, should be mounted in the slot on the
centre bar as for the foot plate.
* Adjust the height and fasten the screw (A)
using the 6 mm Allen key.
Tip!
In general we recommend to mount all acces-
sories from the top of the centre bar which is why
the lower accessories must be mounted first.
Loosen the screws (B) to adjust the height and
angle of the foot supports. Adjust the foot plate
sidewise (C) and in depth (D). Loosen the screws
(E) to adjust the angle of the foot plate. Make
sure to fasten the screws (D) and (E) in the re-
commend order; 1, 2, 3.
Make sure that all screws are fastened
securely before use.
GB SPOKE
PROTECTORS
Follow the description below to mount spoke
protectors on the Combi Frame:
1) Place the protector on the spokes
2) Mount the enclosed clips through the holes in
the spoke protectors and click into place on
the spokes.
Other manuals for Rabbit
2
Table of contents
