QYSEA FIFISH PRO User manual
FIFISH PRO
OPSS (Onshore Power Supply System)
Quick Start Guide
V1.2
Safety and Regulations 1
Introduction 2
OPSS Protective Box 2
Inside Box 3
OPSS Spool 4
OPSS Power Management (OPSS-PM) 5
Electric Power Tank (E-Tank) 6
Preparation 6
Set-up 7-10
Packing After Dive 14
Maintenance 15
LED color index on OPSS-PM 16
Contents
0
1. Unauthorized disassemble may cause the leakage problem, and damages on OPSS. Such
type of safety issues is not responded to QYSEA’s legal liability. In addition, the warranty
will not valid for unauthorized disassembled products.
2. ROV shall be OFF before plug in power outlet.
3. Check the tether, connecters and seals after every dive.
4. The tether external surface shall contact well. If you find any damages, such as,
scratches, peel off or split, stop using damaged tether and contact your local
authorized service center or dealer for repair or replacing.
5. All connectors shall be clean and dry in all time to avoid shortages, and corrosions.
6. All seals and O-rings shall be contact and clean in all time, otherwise, replace it ASAP.
7. Keep the OPSS-PM OFF when deploy and retrieve.
8. It is NOT recommended to use OPSS when diver is operating underwater.
9. Do NOT touching OPSS’s tether and E-Tank underwater.
10.Monitoring the status indicator LED, the error color code index in page 16
11.No heavy objects left on OPSS-PM.
12.Do NOT put OPSS-PM inside water or wet floors, and avoid wave splashes.
Safety and Regulations
1
Operating FIFISH products requests training and practice.
Please read through this document before operating in water.
OPSS Protective Box
1. Top Cap
2. Travel Lock Button
3. Handle
Note:
The travel lock button shall be locked when moving.
Introduction, Package
2
1
22
3
Inside Box
1. OPSS Spool (200 meters or 656 feet)
2. OPSS Power Management (OPSS-PM)
3. AC Input Cable for OPSS-PM
4. E-Tank Mount on ROV
5. Electric Power Tank (E-Tank)
Introduction, Inside Box
3
1
2
4
3
5
Introduction, OPSS Spool
4
1
2
3
OPSS Spool
1. AC Input Plug (to OPSS-PM’s AC input socket)
2. AC Power input socket (190~265 V in AC)
3. Tether (200 meters or 656 feet)
OPSS Power Management (OPSS-PM)
1. AC Input socket (190~265 V in AC)
2. AC Output socket
3. ON/OFF
4. Status Indicator LED (Green: ready to charge, Red: charging battery)
Other colors please check the LED color index on OPSS-PM in page 16
Introduction, OPSS-PM
5
1
2
43
2 1
Introduction, E-Tank
6
1
2
3
Electric Power Tank (E-Tank)
1. E-Tank
2. Securing Loop
3. ROV Plug
Preparation Check List
1. Check and count all parts of OPSS
2. Check the connectors, socket and plug shall be dry and clean, and not damages
3. Check the outdoor power bank or the fuel level of generator
4. Check the remote controller and ROV
5. Check the cell phone, tablet, and laptop’s battery
Note, run a test before dive (Power ON less than 3min).
Set-up (OPSS set-up overview)
For example, Outdoor power bank and FIFISH PRO V6 PLUS
Preparation and Set-up
7
1. Cable connection on OPSS-PM
1.1. Plug AC output on OPSS-PM (another end to spool’s reel)
1.2. Plug AC input on OPSS-PM (another end to AC Scoket)
Set-up
8
Other manuals for FIFISH PRO
1
Table of contents
Other QYSEA Power Supply manuals
