Qualcast QGTP25 User manual
Original Instructions
IMPORTANT! Please read these instructions fully before starting assembly.
October 2018
38cm 25.4cc
Petrol Grass Trimmer 495408
GTP25
These instructions contain important information that will help you get the best
from your product, ensuring it is assembled correctly and safely. If you need help
or have damaged or missing parts, call the Customer Helpline on 01904 727 500.
2
Contents
General safety warnings
Intended use
Warning symbols
In the box
Assembly
Preparation
Operation
Maintenance
Storage
Troubleshooting
Technical data
Disposal and recycling
Getting help
Warranty
3
8
8
10
11
13
14
20
25
28
29
30
30
30
3
General Safety Warnings
Safety warnings
WARNING! Read all safety warnings and
instructions.
Failure to follow the warnings and instructions
may result in serious injury.
WARNING! Read all safety warnings and
instructions designated by the symbol.
Save all warnings and instructions for future
reference.
• Always ensure anyone intending to operate this
machine is fully conversant with the contents of this
instruction manual prior to assembling, maintaining or
operating the machine.
• Perform assembly operations as described in this
manual. Failure to observe this warning may lead to
serious injury, death, or damage to the machine.
• Always take care when removing the packaging, to
prevent damage to you or to the machine.
IMPORTANT! Before assembling the machine, check all
the parts indicated in the manual are in the box. Inspect
all the parts for signs of damage. Do not assemble the
machine if you observe any damaged components.
NOTE! This machine complies with the Noise Emission
Directive 2000/14/EC.
4
General safety
• Keep this operating and maintenance manual in a safe
place for reference at a later date.
• Read the instructions carefully. Be familiar with the
controls and the proper use of the equipment.
• Never allow children or people unfamiliar with the
instructions to use the machine. Local regulations can
restrict the age of the operator.
• Never trim while people, especially children or pets,
are nearby. Keep in mind that the operator or user is
responsible for accidents or hazards occurring to other
people or their property.
• This appliance is not intended for use by people
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
• Do not touch the rotating spool.
Personal safety
• Do not allow children or untrained individuals to use
this unit.
• Never start or run the engine in an enclosed or poorly
ventilated area; breathing exhaust fumes can kill.
• Clear the work area before each use. Remove all
objects, such as rocks, broken glass, nails, wire, or
other such debris, which can be thrown or become
entangled in the cutting line.
5
• Wear safety glasses or goggles when operating this
unit.
• Wear heavy, long trousers, boots, and gloves. Do not
wear loose tting clothing, shorts, or go barefoot. Do
not wear jewellery of any kind.
Operation safety
• Never operate this unit on the operator’s left side.
• Secure long hair below shoulder level, to prevent
entanglement in moving parts.
• Keep all bystanders, children, and pets at least 15m
(50ft.) away.
• Do not operate this unit when you are tired, ill, or under
the inuence of alcohol, drugs, or medication.
• Do not operate it in poor lighting.
• Keep rm footing. Do not overreach. Overreaching can
result in loss of balance or exposure to hot surfaces.
• Keep all parts of your body away from any moving
parts.
• To avoid hot surfaces, never operate the unit with the
bottom of the engine above waist level.
• Do not touch the area around the exhaust or cylinder of
the units; these parts get hot during operation.
• Always stop the engine and remove the spark plug wire
before making any adjustments or repairs, except for
carburettor adjustments.
• Inspect the unit for loose fasteners, fuel leaks, etc.,
before each use. Replace any damaged parts before
use.
6
• The string head will rotate during carburettor
adjustments and engine starting.
• It has been reported, in certain individuals, that
vibrations from hand-held tools may contribute to a
condition called Raynaud’s Syndrome. Symptoms may
include tingling, numbness and blanching of the ngers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to
the development of these symptoms. It is presently
unknown what, if any, vibrations or extent of exposure
may contribute to the condition. There are measures
that can be taken by the operator to possibly reduce
the effects of vibration:
a) Keep your body warm in cold weather. When
operating the unit, wear gloves to keep the hands
and wrists warm. It is reported that cold weather is
a major factor contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
d) Keep the tool well maintained, fasteners tightened
and worn parts replaced.
• If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
7
• Mix and store fuel in a container approved for petrol
clearly identied as 2-stroke.
• Mix fuel outdoors where there are no sparks or ames.
Wipe up any fuel spillage. Move 10m (30ft.) away from
the refuelling site before starting the engine.
• Stop the engine and allow to cool before refuelling or
storing the unit.
• Allow the engine to cool; empty the fuel tank and
secure the unit from moving before transporting in a
vehicle.
• Replace the string head if cracked, chipped, or
damaged in any way. Be sure the string head is
properly installed and securely fastened. Failure to do
so can cause serious injury.
• Make sure all guards, straps, and handles are properly
and securely attached.
• Use only the manufacturer’s replacement string in the
cutting head. Do not use any other cutting attachment.
To install any other brand of cutting head to this string
trimmer may result in serious personal injury.
• Never operate the unit without the grass guard in place
and in good condition.
• Maintain a rm grip on both handles while trimming.
Keep the string head below waist level. Never cut with
the string head located over 76cm (30in.) above the
ground.
• Do not use metal cutting blades.
8
Intended Use
This machine is designed to be used as a machine for trimming grass and light foliage.
For non-commercial use!
Non-intended use:
This machine is not designed for trimming hedges or any other job task whereby the
machine has to be raised over a 30° angle.
Residual risks:
The machine uses a rotating cutting tool. Through this rotational motion, debris can be
thrown from the cutting head of the unit, e.g. stones and sticks.
Warnings Symbols
The following warning symbols appear through this manual and indicate the appropriate
safety measures you should take when operating and maintaining the machine.
Wear protective glasses, hearing protection, and a safety helmet (PPE).
Wear protective gloves.
Wear safety shoes.
Read the instructions for use prior to operating the machine.
When starting and working, keep the filament head away from foreign
materials.
When working, maintain a safe distance of 15m from other people and
from animals.
9
Only the filament trimmer may be used as a tool.
Maximum permitted rotational speed of the cutting tool.
Warning! Hot surface, do not touch.
No naked flames.
Conforms to all relevant safety standards.
Guaranteed sound power level data (114dB), in accordance with
Directive 2000/14/EC.
7500 min-1
114
10
In the Box
Parts
1. Line spool with cutting line
2. Safe guard
3. Lower tube
4. Steady grip
5. Switch On/Off
6. Throttle lock
7. Throttle lever
8. Choke lever
9. Starter
4
3
2
1
5
2
8
6
7
12
14 11
10
13
9
16
17
15
10. Spark plug boot
11. Air lter housing cover
12. Petrol tank
13. Housing for engine cooler
14. Fuel pump
15. Belt
16. Fuel mixer
17. Spark plug wrench
This manual suits for next models
1
Table of contents
Other Qualcast Trimmer manuals
Qualcast
Qualcast 30cc User manual
Qualcast
Qualcast QG-BC 30 User manual
Qualcast
Qualcast HTEG39-660 User manual
Qualcast
Qualcast cgt183a User manual
Qualcast
Qualcast 407635 User manual
Qualcast
Qualcast QG-PH2652 User manual
Qualcast
Qualcast QG-PH2652 User manual
Qualcast
Qualcast GHT600A1 User manual
Qualcast
Qualcast GGT600A1 User manual
Qualcast
Qualcast 1718638 User manual
Qualcast
Qualcast HEDGEMASTER User manual
Qualcast
Qualcast M0E-7ET-410 User manual
Qualcast
Qualcast CDB30 User manual
Qualcast
Qualcast SHT19 User manual
Qualcast
Qualcast GGT350A1 User manual
Qualcast
Qualcast GGT450A1 User manual
Qualcast
Qualcast CHT18LA1 User manual
Qualcast
Qualcast GT2518 User manual
Qualcast
Qualcast HQ-CG 3.6 User manual
Qualcast
Qualcast 30cc User manual
