Qtx SpectraWash User manual
www.avsl.com 154.055UK User Manual
SpectraWash
240W LED Colour Blinder and Strobe
Item ref: 154.055UK
User Manual
The SpectraWash is a powerful 240W Multicolour LED stage-blinder that can produce a vast array of
moving effects, strobes and washes. Easy to setup and use via a wide range of integrated automatic and
sound to light programs or for more precise control there are 4 DMX modes to choose from. Fitted with
twist and lock power connections for a more professional feel and housed in an all-metal casing with fan
cooling for durability and reliable operation.
In the box:
Your SpectraWash should arrive with you in a single carton in good condition. The carton should contain
1 x main unit, 1 fixing bracket with thumbscrews, 1 x twist and lock UK mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 154.055UK User Manual
Placement:
•Use the included mounting bracket to fix to a stand or lighting truss.
•Use secondary safety fixings if mounting overhead.
•Keep away from damp or dusty environments.
•Ensure adequate airflow around the fixture housings.
•Ensure adequate access to controls and connections.
•Do not aim LED output directly into line of sight, as this can result in eye injury.
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing as required.
•Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
•Do not use strong solvents for cleaning the unit.
Rear panel controls:
1. Power input (twist and lock)
2. Power output (twist and lock)
3. Fan ventilation (do not cover)
4. DMX input
5. DMX output
6. Led display
7. Control panel
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to confirm the desired setting.
Function
Description
A001-A512
DMX address settings
CH03-CH39
Switch between CH04, CH11, CH32 and CH39 then
press Enter key to save (default CH11)
1.
2.
3.
4.
5.
6.
7.
www.avsl.com 154.055UK User Manual
M000-M083
Switch between 84 different RGB effects then press
Enter key to save
S000-S255
Modify the operating speed of the RGB effects (slow
to fast) then press Enter key to save
M000-M040
Switch between 41 different White effects then press
Enter key to save
S000-S255
Modify the operating speed of the White effects
(slow to fast) then press Enter key to save
Soud
Sound activated mode
R255-R000
Red linear dimmer (0-100%) default is R255
G255-G000
Green linear dimmer (0-100%) default is G255
B255-B000
Blue linear dimmer (0-100%) default is B255
W255-W000
White linear dimmer (0-100%) default is W255
T000
Display current fixture temperature (eg T045 means
current temp is 45°C; if 10K thermistor is not
installed display will read T000)
Factory settings:
When any address code is A001~A512, press the menu button for 3 seconds to enter the factory settings
mode. In this mode you can adjust the output power of the lamps, fan setting mode, setting temperature
protection point, and sending parameters. Exit the factory settings mode at any time by pressing the
menu button for 3 seconds.
Function
Description
R255-R032
Modify the red colour up or down, then press enter to save (Default
setting is R200)
G255-G032
Modify the green colour up or down, then press enter to save (Default
setting is G200)
B255-B032
Modify the blue colour up or down, then press enter to save (Default
setting is B200)
W255-W032
Modify the white colour up or down, then press enter to save (Default
setting is W200)
FAN0-FAN1
FAN0 lamp bead lights up to start the fan, FAN1 reaches the set
temperature protection point to start the fan, confirm to save.
T040-T105
Set the temp protection point, modify the parameter up or down
(40℃~105℃) press enter to save. (Default setting is T060)
Send
Send the factory setting parameters of this fixture up or down to all
other lights connected in parallel. Confirm the sending of the
parameters and press the menu button for 3 seconds to exit. If the
parameters are denied, press the ENTER button to cancel the sending.
DMX mode:
The SpectraWash can be controlled by DMX signal, simply connect the DMX signal source to the DMX
input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by
looping through the DMX out on the unit. To enter DMX mode, select d001 from the menu and confirm
the correct start address and channel selection by using the “UP”and “DOWN”buttons and “ENTER”.
The “d”on the LED display will begin to flash once it’s received the DMX signal from the controller. This
unit has 4, 11, 32 or 39 DMX channels as indicated in the tables below:
www.avsl.com 154.055UK User Manual
4 Channel mode:
Channel
Value
Function and description
1
0-255
Red linear dimmer (0-100%)
2
0-255
Green linear dimmer (0-100%)
3
0-255
Blue linear dimmer (0-100%)
4
0-255
White linear dimmer (0-100%)
11 Channel mode:
Channel
Value
Function and description
1
0-255
Master dimmer
2
0-255
RGB strobe (slow to fast)
3
0-255
RGB Mode (84 effects, including R/G/B/RG/RB/GB/RGB single colour,
full colour, one-segment, two-segment, racing, flowing, refresh and
stacking. From 003 to 255, every 3 values show an effect mode)
4
0-255
RGB mode speed (slow to fast)
5
0-255
Red linear dimmer (0-100%)
6
0-255
Green linear dimmer (0-100%)
7
0-255
Blue linear dimmer (0-100%)
8
0-255
White strobe (slow to fast)
9
0-255
White mode (41 effects including White color, 1-segment, 2-segment,
3-segment, 4-segment, racing, flowing, refresh and stacking. From
006 to 255 every 6 values show an effect mode)
10
0-255
White mode speed
11
0-255
White linear dimmer (0-100%)
32 Channel mode:
Channel
Value
Function and description
1
0-255
Red segment 1 dimmer (0-100%)
2
0-255
Green segment 1 dimmer (0-100%)
3
0-255
Blue segment 1 dimmer (0-100%)
4
0-255
Red segment 2 dimmer (0-100%)
5
0-255
Green segment 2 dimmer (0-100%)
6
0-255
Blue segment 2 dimmer (0-100%)
“”
“” “”
“” “” “”
22
0-255
Red segment 8 dimmer (0-100%)
23
0-255
Green segment 8 dimmer (0-100%)
24
0-255
Blue segment 8 dimmer (0-100%)
25
0-255
White segment 1 dimmer (0-100%)
26
0-255
White segment 2 dimmer (0-100%)
“”
“” “”
“” “” “”
32
0-255
White segment 8 dimmer (0-100%)
39 Channel mode:
Channel
Value
Function and description
1
0-255
Master dimmer
2
0-255
RGB strobe (slow to fast)
3
0-255
RGB Mode (84 effects, including R/G/B/RG/RB/GB/RGB single colour, full
colour, one-segment, two-segment, racing, flowing, refresh and stacking.
From 003 to 255, every 3 values show an effect mode)
4
0-255
RGB mode speed (slow to fast)
5
0-255
Red segment 1 dimmer (0-100%)
6
0-255
Green segment 1 dimmer (0-100%)
7
0-255
Blue segment 1 dimmer (0-100%)
www.avsl.com 154.055UK User Manual
“”
“” “”
“” “” “”
26
0-255
Red segment 8 dimmer (0-100%)
27
0-255
Green segment 8 dimmer (0-100%)
28
0-255
Blue segment 8 dimmer (0-100%)
29
0-255
White strobe (slow to fast)
30
0-255
White mode (41 effects including White color, 1-segment, 2-segment, 3-
segment, 4-segment, racing, flowing, refresh and stacking. From 006 to 255
every 6 values show an effect mode)
31
0-255
White mode speed
32
0-255
White segment 1 dimmer (0-100%)
32
0-255
White segment 2 dimmer (0-100%)
“”
“” “”
“” “” “”
39
0-255
White segment 8 dimmer (0-100%)
Specifications:
Power supply
110-240Vac, 50/60Hz
Power consumption
240W
Fuse rating
F2A
LED type
864pcs RGB SMD5050 LED, 96pcs White SMD5050
Effects
RGB colour mixing, Electronic dimming 0-100%, Strobe 1-30Hz 30 bits
Modes
DMX, Master/Slave, Auto, Sound, RDM
Connections
Power in/out (twist and lock), DMX in/out (3pin XLR)
DMX channels
4, 11, 32 or 39CH
Dimensions
460 x 240 x 75mm
Weight
3.6kg
Troubleshooting:
No power (mains)
Check mains voltage is correct and outlet is switched on
Check twist and lock power lead is connected properly
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure the A on the DMX address
flashes to confirm it’s receiving a DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/Cutting out
Ensure adequate ventilation and unit is not too close to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.
This manual suits for next models
1
Table of contents
Other Qtx Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
