QPIX MDFC-1400 User manual
MDFC-1400
DIGITA L
110 / 135 / 126KPK / Super 8
NEGATIVE & SLIDE CONVERTER
User's manual
User Manual
For correct usage please read these instructions carefully and keeps in
a safe place for future reference!
Contents
1.Preface........................................................................................1
2.Safety Precautions......................................................................1
3.Package contents........................................................................2
4.Description of parts......................................................................3
5.Negative holder loading method..................................................4
6.Loading Slide............................................. ................................ 5
7.Operation Guided .......................................................................6
8.Product Specication.................................................................14
9.Declaration.................................................................................15
1
Thank you for purchasing this product! Please read this user's manual
carefully before using this product.
Please retain this manual for future reference.
Please use this product correctly
•
•
•
•
•
•
•
•
•
•
1: Preface
2.Safety Precautions
Do not disassemble this unit.
Do not touch inner part of the scanner after dropping or other damage
suffering.
Do stop using it if there is any problem with the scanner, such as
smoke or smell while using.
Do not clean the scanner with alcohol, gasoline, diluent and other
organic solvent.
Do not use it in many dusts with the damp environment.
Do not overload the USB connections on your computer to avoid poor
working of the scanner for overloading.
Please use films of standard size.
Cleaning: Please make sure the scanner is clean before using so as to
produce a clean image.
Non use period: The USB cord or adapter should be unplugged from
the computer or plug seat when the unit is left unused for a long period
of time.
The device can support 32GB SD, but we recommend you use 16GB
or less SD card, as the device needs to pre-read and calculate
capacity of the inserted SD card to get the number of how many
images can be stored,large capacity SD might slow the response
speed of the device or even freeze the system, when this occurs,
please disconnect the power cable to re-open the device.
To protect the machine and save energy, 30 minutes without
continuous operation will automatically shut down in the state of
power-on .Press the power button to turn again to normal use.
2
• Film scanner
• Negative Film Holder
• Positive Slide Holder
• 110 Film Holder
• Super 8
• AC/DC adapter
• USB cable
• Cleaning brush
• TV cable
• User Manual
3: Package contents
3
4: Description of parts
Slide Adapter Negative Adapter
THIS SIDE UP 110 Insert
THIS SIDE UP Super8 Insert
Please stretch into clean from product side,when you use cleaning
brush to clean backlight.
•
Negative Film Holder
Slide Holder
110
TV cable
USB cable
Adapter
Film scanner
Super 8
Brush
User Manual
MDFC-1400
DIG ITAL
110/ 135 / 126KPK / Sup er 8
NEGATIVE& SLIDE CONVE RTER
User's manual
4
5: Negative holder loading method
a.Hold up the negative toward the light.
Face the right side of the negative to
yourself.
b.Take out negative holder out. Let the side
with “open” logo face yourself, and let the
side with “ ◄ ”logo face down. Open the
negative holder, then place negative into
recessed area in the holder.Close the
negative holder and press the edges so
that it locks in place
c. Insert the negative holder into the slot on
the right side of the lm scanner .
5
6: Loading Slides
a.Hold up the slide toward the light. Face
the righ side of the slide to yourself. (we
don't provide white small holder)
b.Take out slide holder out. Let the side with
“open” logo face yourself, and let the side
with “ ◄ ”logo face down.
Open the slide holder, then place slides
into recessed area in the holder.(films
also could be loaded as a strip into the
slide holder, forming drawer type as
below picture)
Close the slide holder and press the
edges so that it locks in place
c. Insert the slide holder into the slot on the
right side of the lm scanner as shown.
• Handle lms with care to avoid scrathesor nger prints(for the best
use cotton gloves when handling films)It is recommended to use
compressed cotton to remove any dust on the lms.
6
7: Operation Guided
1. Introduction of Menu
① ② ③ ④ ⑤ ⑥ ⑦
① Language mode ④Format
② USB mode ⑤Playback mode
③Capture mode ⑥Film Type ⑦Resolution
2. Capture Picture
2.1 Before scanning please make sure the inner backlight panel is
clean.
Note: You can use the provided brush to clean the screen.
7
2.2 In main Menu mode press OK/ENTER enter capture mode, then
press Convert/Mode then press OK/Enter the picture would be
captured.
2.3 Before pressing to capture picture, you can press left button to
mirror and press right button to ip the current picture. And you can
press OK button to set Exposure.
OK/Enter
OK/Enter
Convert/Mode
8
Then press Convert/Mode button again back to main menu.
Press left key ,the image position be altered from left to right
Press right key,the image position be altered from up to down
Press ENTER to set exposure compensation
Mirror
Filp
ENTER
Other manuals for MDFC-1400
1
This manual suits for next models
4
Table of contents
