Qazqa 45839 User manual

INSTALLATION INSTRUCTIONS

Please read these instructions carefully before attempting to install this

product. It is advisable to keep these instructions in a safe place for future reference.

Must be installed by a qualified electrician.

PARAMETER:

IP Rating IP44

Rated Voltage AC 220-240V, 50Hz

Rated Wattage 3xMax. 100W

Protection Class Class I

Lampholder E27

Electrical Installation

Always switch off the electricity supply at the mains during installation and maintenance. We

recommend that the fuse is withdrawn or circuit breaker switched off at the distribution board whilst

work is in progress (turning off the light switch is not sufficient).

1. A concrete filled hole with insulated piping for the mains cable need to be setup. Feed the

mains cable through the insulated piping (not supplied) allowing enough surplus to connect

into the terminal block.

We suggest that you use H05RN-F specification cable (not supplied) which is an outdoor grade,

rubber sheathed cable. The cable must have a minimum cross sectional area of 1.0mm².

2. Fix the tripod (A) on top the concrete.

3. Insert the three anchor bolts (B) through the tripod (A) into the concrete with the threaded part

above the ground.

4. The next thing can do once the concrete has dried.

5. Twist and remove the cover and install the lamp.

Replacement lamp(s) should be of the same type, voltage and wattage as specified on the label.

CAUTION: The lamp will become hot. Switch off and allow to cool before changing the

lamp.

6. String the electric cord, from the lamp head (F) thru upper pole (E), lower pole (D) and base

(C).

7. Attach the lamp head (F) onto the upper pole (E) and then secure the two together with the

hex bolts (J3).

8. Connect the mains supply to the terminal block, using the following colour code for the wiring:

Connect the Brown (Live) wire to the corresponding terminal on the terminal block marked L.

Connect the Green/Yellow (Earth) from the mains supply to the Earth terminal marked E or .

Connect the Blue (Neutral) wire to the corresponding terminal on the terminal block marked N.

9. Lift the base (C) onto the anchor bolts (B) and secure with the nut covers (J1) and locking

washers.

10. Attach base (C) to lower pole (D) using screws (J2) and locking washers.

11. Thread lower pole (D) to upper pole (E) and secure with the screw.

12. Restore mains supply and switch on.

Care and Use

1. This product must be earthed.

2. Please use the double-pole-off switch.

3. Replace any cracked/damaged diffuser immediately-do not use if they are damaged.

45839

A

B

C

D

E

F

J1 J2

J3

Table of contents

Other Qazqa Outdoor Light manuals

Qazqa

Qazqa 90500 User manual

Qazqa

Qazqa Charlois WL Black PIR User manual

Qazqa

Qazqa NAUTICA WL 2 User manual

Qazqa

Qazqa Shade 33 Globe White User manual

Qazqa

Qazqa Terry GS User manual

Qazqa

Qazqa Hobby FL 93517 User manual

Qazqa

Qazqa NAUTICA WL1 91857 User manual

Qazqa

Qazqa Grande FL Satin User manual

Qazqa

Qazqa Simon WL 2 PIR User manual

Qazqa

Qazqa Odense P50 Black User manual

Qazqa

Qazqa Antigua P220 Bronze User manual

Qazqa

Qazqa Brescia Combi WL User manual

Qazqa

Qazqa Charlotte 104418 User manual

Qazqa

Qazqa Garly SL 4 Black Solar User manual

Qazqa

Qazqa New York WL Dark Grey User manual

Qazqa

Qazqa Pallon FL Brass Pink User manual

Qazqa

Qazqa Charlois WL Black Lux User manual

Qazqa

Qazqa Frances FL 1 User manual

Qazqa

Qazqa JeIena FL 2 User manual

Qazqa

Qazqa Charlois WL Black User manual

Qazqa

Qazqa Empoli FL Bronze CCT 2 User manual

Qazqa

Qazqa Big Cage FL 3 Black User manual

Qazqa

Qazqa Parte FL Black User manual

Qazqa

Qazqa Elif FL 1 Black Gold User manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual