Pyle PDWM1950 User manual

CompactUHFWirelessMicrophoneSystem

USB Powered Desktop Mic Receiver System

withAdjustable Volume Control

PDWM1950 PDWM1958B PDWM2850

PDWM2880B PDWM1980

PDWM1988B PDWM2950

PDWM2958B

www.PyleUSA.com www.PyleUSA.com 1

• To set up the system and to avoid interference, each unit may have many

presented channels.

• When using numbers of receiversltransmitters together, each unit should use

dierent channels.

Tips

1. Transmitter and antenna should keep in a barrier-free linear relative position.

2. Do not place receiver close to metal surface object or digital equipment.

3. Try to keep receiver 1.5m above the ﬂoor and 1m away from the wall.

Contents

System Component

Receiver

Body Pack Transmitter

Body Pack Transmitter Connection

Charging the Microphone

Conguration of Multiple Systems

Troubleshooting

Specication

System Component

The contents above are for the whole system, the actual component may dier

2-3

4-6

8888

14500

1. Wireless receiver

2. Adapter (optional)

3. Adapter (optional)

4. Cable (optional)

5. Charging cab|e(optional)

6. AA batteries (optional)

7. 14500 lithium battery (optional)

8. User manual (Optional)

9. Handheld transmitter (optional)

10. Body pack transmitter (optional)

11. Lavalier microphone (optional)

12. Headset mic (optional)

13. 6.35" signal output cable

www.PyleUSA.com

2www.PyleUSA.com 3

1. Power signal lamp

2. LED display

3. Battery Cover

4. Frequency-change button

5. Power switch

Receiver

The images above are indicative only, the actual product may dier

VOL-A POWER

AF RF VOL-A

AF AF POWER

RF RF

VOL-B

VOL-A VOL-B POWER

ANT-AANT-B

DC 5V IN

A U D IO O UT

6 6

BALANCED-B

ANT-A ANT-B

BALANCED-A

D C 5 V O U T

D C 5 V I N A U D IO O UT

11 10 988 10

BALANCED

ANT-AANT-B

D C 5 V I N

D C 5 V O U T

A U D IO O UT

11 10 98

55 5

8 8 8 8 8 8 8 8

5 5

1. Power Switch

2. VOL. A

3. VOL. B

4. RF Signal Lamp

5. AF Signal Lamp

6. Power Signal Lamp

7. LCD Display

8. 1/4 Audio Output Socket

9. XLR Audio Output Socket

10. Power Input Socket

11. Charging Socket

12. ANT-A

www.PyleUSA.com

4www.PyleUSA.com 5

Matching Receiver and Transmitter (Only apply to some models)

1. Make sure the receiver is powered OFF.

2. On transmitter side, press and hold the frequency- change button, then press

and hold the power button till the display is ﬂashing.

3. Turn ON the receiver and then you will see the RF light is ﬂashing.

4. Attention: For the receiver that has LED display, turn ON the receiver and

wait for 3-5 seconds

5. Get back to the transmitter side and re-press the frequency-change button.

6. Matching is successful if the RF light is ON or the LED display shows frequency,

otherwise, re-do step 1 to step 5.

Body Pack Transmitter (Only apply to some models)

Functions

1. Clip microphone socket

2. LED Iight

3. Antenna

4. LED display

5. Frequency-change button

6. Power switch

Frequency-change button

Matching Receiver and Transmitter (Only apply to some models)

1. Make sure the receiver is powered OFF.

2. On transmitter side, press and hold the frequency- change button, then press

and hold the power button till the display is ﬂashing.

3. Turn ON the receiver and then you will see the RF light is ﬂashing.

4. Attention: For the receiver that has LED display, turn ON the receiver and

wait for 3-5 seconds

5. Get back to the transmitter side and re-press the frequency-change button.

6. Matching is successful if the RF light is ON or the LED display shows frequency,

otherwise, re-do step 1 to step 5.

www.PyleUSA.com

6www.PyleUSA.com 7

BODYPACK TRANSMITTER CONNECTION

1. Lavalier Microphone Connection:

Connect the connector of supplied lavalier microphone to the connecting jack

of transmitter (Shown as below). Set the transmitter work state in wireless

lavalier system.

2. Headset Microphone Connection:

Connect the connectorof supplied headset microphone to the connecting

jack of transmitter (Shown as below). Set the transmitter work state in wireless

headset system.

8 8 8 8

VOL-A

AF AF POWER

RF RF

VOL-B

W a it f o r 4~5 s e c o n d s

VOL-A

AF AF POWER

RF RF

VOL-B

POWE R OFF

8888

Flashing

Frequence

change buttona

8888

O K

VOL-A AF AF POWER

RF RF VOL-B

P O W E R ON

Flashing a

2 3

Press and hold

A B

www.PyleUSA.com

8www.PyleUSA.com 9

TROUBLESHOOTINGCharging the microphone (Only apply to some models)

CAUTION: For charging microphone, MUST NOT use AA battery to power the

microphone. MUST use 14500 lithium battery.

Conguration of Multiple Systems

1. Transmitters match corresponding receivers to prevent frequency interference

(See "Matching receiver and transmitter" for reference)

2. Using dierent frequencies among transmitters

(The dierence should be 3-4MHz for each transmitters)

BALANCED-B

ANT-A ANT-B

BALANCED-A

DC 5 V O UT

DC 5 V I N A U D I O O U T

VOL-A

AF AF POWER

RF RF

VOL-B

VOL-A VOL-B POWER

Charging socket

Problem Status Solution

No sound

or sound is weak

Transmitter display

or light is o

1. Turn on transmitter

2. Make sure battery is

installed right

3. Replace batteries

Receiver display

or light is o

Make sure adapter is pluged

into receiver DC socket, and

the adapter is power supplied

Receiver display or light

indicate RF signal

1. Turn up receiver volume

2. Check the cable connection

of receiver

Receiver display or light

indicate no RF signal;

Transmitter and receiver

power light is on

1. Remove receiver away from

metal objects

2. Check if barrier is between

receiver and transmitter

3. See “Matching receiver and

transmitter”

Distortion or

unwanted noise

bursts

Receiver display or light

indicate RF signal

1. Remove interference

sources nearby

2. Change receiver and

transmitter working

frequency

3. Replace transmitter

batteries

4. If using many sets together,

increase working frequency

interval of systems

5. Maximize the volume

button

Failed to turn ON

transmitter

Press power button,

transmitter not working,

or shut down after a

second

1. Replace batteries

2. Re-press power button

after few seconds

www.PyleUSA.com

10 www.PyleUSA.com 11

SPECIFICATION

Some specication may not apply to some models.

RECEIVER

Channels ----------------------------------------------- 16 Channels

SNR --------------------------------------------------------- 96db

Sensitivity -------------------------------------------------- 96dbm

Frequency Response ---------------------------------------30~20kHz

Channel Interval ---------------------------------------------500kHz

Output Impedance ----------------------------------------- 600 Ohm

Power Supply --------------------------------------------------- 5V

Power Consumption ------------------------------------------<85Ma

LED Display

HANDHELD TRANSMITTER

Power Output ----------------------------------------------- 10dbm

Frequency Response ------------------------------------30kHz~20kHz

Power Supply ------------------------------------- 3v (Normal battery)

Power Supply ----------------------------------- 3.7V (Lithium battery)

BODYPACK TRANSMITTER

Power Output ----------------------------------------------- 10dbm

Frequency Response ------------------------------------30kHz~20kHz

Power Supply --------------------------------------------------- 3v

DESKTOP WIRELESS MICROPHONE SYSTEM

PDWM1950 PDWM1958B PDWM2850

PDWM2880B PDWM1980

PDWM1988B PDWM2950

PDWM2958B

This manual suits for next models

Table of contents

Popular Microphone System manuals by other brands

Paso

Paso R824 quick start guide

Naxa

Naxa NAM-982 instruction manual

Motorola

Motorola PMNN4461 user guide

Xvive

Xvive U3 user manual

Tekon

Tekon DUOS installation guide

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 user manual

Devine

Devine WMD-IE user manual

LG LF-D7150 owner's manual

GE S768DAV user manual

LD U305 HBH 2 user manual

Chainway

Chainway URA8 user manual

ORATOR

ORATOR D860TD instruction manual

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 quick guide

Alpha Technologies

Alpha Technologies RBMS Installation & operation manual

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 user manual

Shure

Shure UA844 user guide

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM operating instructions

Airspan

Airspan AS4000 Installation and commissioning