PureLink UX-8800 User manual
Owner's Manual
UX Series
HDMI 2.0 Integrated Matrix Switcher
PureLinkTM
PureLink by Dtrovision
2
TABLE OF CONTENTS
Chapter 1. Product Overview
1.1 Safety Precautions --------------------------------------------------------------- 3
1.2 Declaration of Conformity --------------------------------------------------------------- 4
1.3 What’s in the Box --------------------------------------------------------------- 4
1.4 Product Introduction --------------------------------------------------------------- 5
1.5 Front View of UX-8800 --------------------------------------------------------------- 6
1.6 Rear View of UX-8800 --------------------------------------------------------------- 6
1.7 Front View of UX-4400 --------------------------------------------------------------- 7
1.8 Rear View of UX-4400 --------------------------------------------------------------- 7
1.9 Installation Guidelines --------------------------------------------------------------- 8
Chapter 2. Product features
2.1 Features --------------------------------------------------------------- 9
Chapter 3. Operational guidelines
3.1 Main Menu User Guide --------------------------------------------------------------- 10
Chapter 4. Communication Code Configuration
4.1 Control Programmer’s Guide ---------------------------------------------------- 15
4.2 Overview ---------------------------------------------------------------------- 15
4.3 Command Code Formats ----------------------------------------------------------- 15
4.4 General Rules for Command Codes --------------------------------------------- 16
4.5 Command Ack Value Response ---------------------------------------------------- 18
4.6 Connecting Switches --------------------------------------------------------------- 18
4.7 Disconnecting Switches ----------------------------------------------------------- 20
4.8 Connection Status Check ----------------------------------------------------------- 22
4.9 LAN Code Configuration ----------------------------------------------------------- 25
Chapter 5. Web UI Guide and Firmware Instruction
5.1 Web UI Guide ---------------------------------------------------------------- 26
5.2 Firmware upload Web UI ---------------------------------------------------------- 35
5.3 Firmware upload USB -------------------------------------------------------------- 38
*There are two ways to upload the firmware (Web UI, USB port)
Chapter 6. Additional Information
6.1 Manufacturer’s Warranty (3-Year) ------------------------------------------------- 41
6.2 Customer Service ------------------------------------------------------------------- 41
PureLink by Dtrovision
3
Chapter 1. Introduction
1.1Safety Precautions
All safety instructions should be read and understood before the unit is operated.
The owner’s manual and safety instructions should be retained for future reference.
Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth only.
Keep away from wet, magnetic, and flammable surfaces or substances.
Always use the correct external power supply (indicated on the product label) when operating this unit.
This unit may be equipped with a 3 wire grounding-type plug - a plug having a third (grounding) pin.
This pin will only fit in to a grounding type power outlet. If you are unable to insert the plug in to the
outlet, contact your electrician to replace your obsolete outlet.
Air vents should be kept clean and unobstructed at all times.
Please refrain from using frayed power cords and damaged wall outlets.
Do not place any heavy objects or equipment on top of the unit.
To prevent electrical damage, TURN OFF the power to this unit before inserting or removing
INPUT/OUTPUT slot cards.
If your product is malfunctioning or for assistance operating your product, please contact our
technical support team.
PureLink by Dtrovision
4
1.2 Declaration of Conformity
According to Council Directive 73/23/EEC (February 19, 1973) on the Harmonization of the Laws of
Member States relating to Electrical Equipment; Council Directive 89/336/EEC (May 3, 1989) on
Electromagnetic Compatibility; Council Directive 93/68/EEC (July 22, 1993)-Amending Directives
89/336/EEC (MC) and 73/23/EEC (Low Voltage Equipment Safety), and/or CPU Boards and Power
Supplies used Council Directive 93/68/EEC with Matrix, Dtrovision LLC, 535 E Crescent Ave Ramsey, NJ
07446 201-488-3232, declares under sole responsibility, that the product identifies with 93/66/EEC of the
Council Directive Low Voltage Equipment Safety. Each product marketed is identical to the representative
unit tested and found to be compliant with the standards.
1.3 What’s in the Box
Main Frame: UX-4400 / UX-8800
Power Adapter –DC12V, 7.5A, 60W
RS-232C & LAN cables
Rack Ears
Owner’s manual
PureLink by Dtrovision
5
1.4 Product Introduction
The UX Series 4K HDMI Matrix Switchers provide high performance distribution of audio and
video resolutions up to Ultra HD/4K with advanced EDID management and HDCP 2.2 compliance.
Available in fixed I/O configurations from 4x4 to 8x8, the UX Series incorporates the latest technologies in
Ultra HD/4K transmission including HDMI 2.0b and CEC support. PureLink’s legendary Auto-EDID system
ensures compatibility across multiple display types, delivering consistent connectivity and quick, clean
switching from source to display for a seamless presentation experience.
4x4 or 8x8 HDMI 2.0b Matrix Switching
PureLink’s UX Series Matrix Switchers are available in the 4x4 (UX-4400) and 8x8 (UX-8800)
configurations
Supported Resolutions
Video resolutions up to Ultra HD/4K
4096 x 2160 @50/60Hz (RGB 4:4:4 YCbCr 4:4:4, 4:2:2, 4:2:0)
Full 3D up to 1080p@60Hz
HDMI v2.0b Compatibility
Full 3D & 48-Bit Deep Color support, 7.1 Channel Dolby TrueHD & DTS MasterHD
HDR (High Dynamic Range)
BT2020 color representation
Control Options:
Front panel buttons
Built-in RS-232C and LAN for external control via PC, Controller, and Web UI
HDCP 2.2 Compliance on all Inputs and Outputs
PureLink by Dtrovision
6
1.5 Front View of UX-8800
<Front Panel>
(Figure 1-1)
POWER: Main power switch ON / OFF
DISPLAY: View menu and system mode
MENU:Navigate menu and control options
CREATE: Program inputand output channels
PREVIEW: View saved channel
ENTER: Save/select desired setting
CANCEL: Revert to previous setting
USB PORT : Firmware upload port
IN1~8: Select input channels (1~8)
OUT1~8: Select output channels (1~8)
1.6 Rear View of UX-8800
<Back Panel>
(Figure 1-2)
DC 12V: Power supply (DC +12V) input port
LAN: LAN (TCP/IP) input port
RS-232 C: RS-232 Serial Port for Control
INPUTS : HDMI v2.0b Input ports 1~8 (Female type)
OUTPUTS : HDMI v2.0b Output ports 1~8 (Female type)
The UX-8800 features a 19” rack mountable chassis with function keys, push button controls, and a status
display as shown in Figure 1-1.
PureLink by Dtrovision
7
1.7 Front View of UX-4400
The UX-4400 features a 19” rack mountable chassiswith function keys, push button controls, and a status
display as shown in Figure 2-1.
<Front Panel>
(Figure 2-1)
POWER: Main power switch ON / OFF
DISPLAY: View menu and system mode
MENU:Navigate menu and control options
CREATE: Program input and output channels
PREVIEW: View saved channel
ENTER: Save/select desired setting
CANCEL: Revert to previous setting
USB PORT : Firmware upload port
IN1~4: Select input channels (1~4)
OUT1~4: Select output channels (1~4)
1.8 Rear View of UX-4400
<Rear Panel>
(Figure 2-2)
DC 12V: Power supply (DC +12V) input port
LAN: LAN (TCP/IP) input port
RS-232 C: RS-232 Serial Port for Control
INPUTS : HDMI v2.0b Input ports 1~4 (Female type)
OUTPUTS : HDMI v2.0b Output ports 1~4 (Female type)
PureLink by Dtrovision
8
1.9 Installation Guidelines
The following installation settings are recommended for optimal performance.
Operational temperature should be 30°C or below
Operational humidity should be 60% or below
Operational environment should be dust-free and well ventilated
Stabilized AC input power (AVR-based power supply) is highly advised
PureLink by Dtrovision
9
Chapter 2. Product Features
2.1 Features
Full HDMI v2.0b support and HDCP 2.2 compliance
19” standard rack mount enclosure
External EDID read functionsupports HDMI or DVI displays.
Bi-directional RS232/LAN control
Locking HDMI ports
Ultra HD/4K support
- Video resolutions up to 4K@50/60Hz (RGB/YCbCr 4:4:4)
- Full 3D up to 1080p@60Hz
Multiple control options:
- Front panel push buttons
- RS-232C COM port
- Select by LAN (TCP/IP or Web UI)
Instant noise reduction on all input and output circuits to prevent electrical interference
Convenient firmware upgrade via USB port or PC
PureLink by Dtrovision
10
Chapter 3. Operational guidelines
3.1Main Menu User Guide
Turn the power switch on
Once all channel indicator lights are on, the first step is completed.
Channel View and Input Selection
IN / OUT indicates connection status
Press the IN / OUT KEY to display each channel’s connection status and video resolution
Press the CANCEL KEY to return to the initial screen
Create Menu
Press the IN / OUT KEY to set a channel
Press the ENTER KEY to save or switch input channels
Press CANCEL to reverse a selection and return to the previous screen
Menu
Select a Menu button to view the sub-menu
Use the Create (UP) / Preview (Down) buttons to control the sub-menu options
On the sub-menu, user can check and configure below settings;
EDID Set
RS-232 Set
LAN Set
LAN Info
Product ID Set
FirmwareInfo
Factory Reset
This manual suits for next models
1
Table of contents
Other PureLink Matrix Switcher manuals
PureLink
PureLink PT-MA-HD44DA User manual
PureLink
PureLink HTX-8800-U User manual
PureLink
PureLink HTX III-4400 User manual
PureLink
PureLink PT-MA-HD88 User manual
PureLink
PureLink SX-4400 User manual
PureLink
PureLink HTX-4400-U User manual
PureLink
PureLink PT-MA-HD88-C User manual
PureLink
PureLink PT-MA-HD44-QV User manual
PureLink
PureLink HTX III-8800 User manual
PureLink
PureLink UX Series User manual
