Puqpress M2 User manual
1
EN
Precision coee tamper
version 1.0.1
Precision coee tamper
EN
Zur gewerblichen
Verwendung
ana
eiennsaneitn
DE
2
Dear coee enthusiast,
First o we would like to congratulate you with your very own
Puqpress and thank you for showing condence in our product.
The Puqpress is a fully automatic tamper developed by people with
a passion for perfect coee and elegant technology.
Our specialists have spent all their knowledge and devotion in
developing the ultimate tool to standardise the tamping pressure, a
crucial parameter for a perfect cup of coee.
Please investigate this manual closely so you and your customers
will enjoy the Puqpress to the fullest and store the manual away
safely after reading. If anything remains unclear please feel free to
contact your authorized dealer or contact us directly.
We wish you all the fun and perfection with your new Puqpress!
Greetings from Amsterdam,
Barista Technology BV
3
EN
Precision coee tamper
Table of content
1Safety 4
1.1 Safety instructions 4
1.2 Personel requirements 5
2Technical data 5
3Description 5
4Set-up and basic adjustment 7
4.1 Adjustment of port-a-lter clamp 7
4.2 Usage location 9
4.3 Set-up with Mythos 9
4.4 Electrical Installation 12
5Operation 12
5.1 Normal operation of the tamper 12
5.2 Tamping force adjustment 12
5.3 Clean modus 13
6Remove tamper disk 14
7Operating faults 16
8 Service 17
9Spare parts 17
10 Warranty conditions 18
4
1. Safety
Read all instructions and information in this manual and
other literature that might be included in the package
before the coee tamp device is used.
1.1 Safety instructions
1. The appliance is not to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
2. Children being supervised not to play with the appliance
3. This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved
4. Cleaning and user maintenance shall not be made by children without
supervision
5. Do not immerge cables , plugs or the device itself into water or other
liquids to avoid electric shock, or injury.
6. Always remove the electrical plug from the outlet prior to conducting
maintenance or cleaning work on the tamper.
7. Do not use the device if the cord or plug is damaged or in case of
damage or breakage. Any required repairs may only be conducted
by authorized service personnel. For this reason, please contact a
customer service repair facility or your dealer.
8. Do not make any modications or alterations to the tamper. The
manufacturer holds absolutely no liability for damages occurring from
failure to observe these instructions.
9. Do not insert your hand (or other limbs) between the tamper disk and
lower clamp.
5
EN
Precision coee tamper
1.2 Personnel requirements
No special requirements are necessary for the users of this tamper.
Nevertheless it is a prerequisite that these operating instructions
have been carefully read and understood and that all instructions
provided are observed. In addition, safety-conscious operation is
expected.
2 Technical data
Model number 2-000-01XX-2, 2-000-02XX-2,
2-000-03XX-2, 2-000-04XX-2,
2-000-05XX-2, 2-000-07XX-2
Voltage / Frequency 100-240 Vac
50-60 Hz
Power 76 W
Dimensions [mm] W 230, D 270 , H170
Weight 4.5 kg (10lbs)
Year built See tag plate top side
Tamper diameter See tag plate top side
3 Description
The main components and operating elements are pictured in the
illustration.
Pos. Part name
1 Top plate
6
2 Main Body
3 Upper clamp
4Lower clamp
5Bolts to fasten lower clamp
1
3
8
4
5
6
7
9
10
2
7
EN
Precision coee tamper
6Display
7Fine adjustment wheel
8 ON/OFF switch
9Bottom side: power entry
10 tag label
4 Set-up and basic adjustment
You have received your tamper in operating condition. Now you only
need to adjust the port-a-lter clamp, connect the tamper to the
power grid and insert drip tray. Proceed as follows:
4.1 Adjustment of port-a-lter clamp
The tamper is designed so that all dierent portalter from various
espresso machines t into the clamp (pos. 3 & 4 ) for even and level
tamping.
If the portalter clamp is not correctly adjusted, even and level
tamping cannot be guaranteed!
Proceed as follows for adjustment of the portalter clamp:
1. Retract the power cord from the socket at the bottom side.
8
2. Slightly loosen the bolts (pos. 5) with the provided T-wrench and
pull down the portalter clamp.
3. Insert the portalter in between the upper- and lower clamp.
Turn the adjustment wheel counter-clockwise to move the lower
clamp up against the portalter.
4. Refasten the bolts (pos. 5) screws slightly. Do not fasten the bolts
entirely.
9
EN
Precision coee tamper
5. Remove the port-a-lter and fasten the screws rmly.
6. Try to insert the portalter in the clamp and check if the port-a-
lter slides in the clamp easily. If the adjustment of the clamp is
too loose, start again at step 2.
7. The portalter should not wiggle!
4.2 Usage location
Place the tamper on a level, vibration-free surface.
Never operate the tamper in moist, or even worse, in wet
surroundings!
4.3 Set-up with Mythos
For a safe set-up with the Mythos grinder, make sure you
handle it with 2 people with care.
10
1. Carefully slide the back of Puqpress M2 over the edge of the
table or bar where you want to use your set-up. Insert the power
cord in the socket at the bottom inside of the tamper.
2. While lifting the Mythos to place on Puqpress M2, guide the
Mythos cable from top to bottom through Puqpress.
Other manuals for M2
2
Table of contents
