Pulsar RAWO7 User manual

Code: RAWO7

Name: 7U/150mm/17 Ah two-level RACK Security

enclosure for RACK19" cabinets

v1.0

Edition: 1 from 25.01.2017

Supersedes the edition: --------------

1. Application:

The metal RAWO7 enclosure is designed for mounting the alarm control panel and the input/output modules in

RACK19” cabinets. The enclosure has a removable mounting plate (1st level) and a removable hinged mounting plate (2nd

level). The enclosure has a battery compartment for a single 7Ah/12V battery. The mounting plate (1st level) has holes for

mounting transformers of the TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar.

The hinged mounting plate (level II) is fitted with universal holes for mounting of control panels and expansion modules of

the following companies: DSC, PARADOX, RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER and EBS.

Fig.1

2. Mounting the enclosure to RACK 19” cabinets:

Mount cage nuts for M6 screws in the RACK cabinet, as shown in Figure 2. Use M6 screws to mount the enclosure

to the RACK profiles.

Fig.2

3. The introduction of cables into the enclosure:

The enclosure has four openings (at each side) for the introduction of cables. All openings are fitted with rubber

grommets, Fig. 3.

Fig.3

Wires can be introduced in three ways:

a) Through rubber grommets –fig.4

Fig.4

b) Using the MM019 / MM020 protection tubes - fig.5.

Fig. 5

c) Using the MM019 / MM020 protection tubes and the ARAP16P/ ARAP21P cable glands - fig.6

Fig. 6

4. Mounting the transformer/PSU/battery/other modules:

The enclosure is equipped with a hinged mounting plate (1st level) with holes for mounting of transformer of the

TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar. The enclosure has a battery

compartment for a single 7Ah/12V battery.

Fig. 7

5. Securing wires to a hinged mounting plate:

The enclosure is equipped with a hinged mounting plate (2nd level) with holes for mounting of control panels and

expansion modules. Universal holes are dedicated for control panels and expansion modules of the following companies:

DSC, PARADOX, RISCO, SATEL, PYRONIX, CROW, and ROGER. The hinged mounting plate is fitted with handles to

secure the signal wires. Mounting of control panels / expansion modules / wires is shown in Fig. 8.

Fig. 8

6. Dimensioning:

7. Control panels and modules that can be mounted in the enclosure:

DSC: (PC 1616, 1832, 1864, 4020) + 5x 5108 ( 4108, 5208, 5100, 4116)

(PC 5204, 5400, 5200, 5580, 4216, 4204) + 5x 5108 ( 4108, 5208, 5100, 4116)

PARADOX: ( E55, E65, 728ULT, EVO48, EVO192, SP4000, SP5500, SP6000, SP7000) + 5 x Z X 8 ( Z X 4,

APR3-HUB2)

RISCO: PRO24, 116, 128, 140 + 3x EZ16

PRO24, 116, 128, 140 + 4x E04 (EZ08, RP296 EPS)

SATEL: CA4V1, CA5, CA6

(VERSA 5, 10, 15, CA10) + 5 x CA10E ( CA 64E, SM, MST1)

(INTEGRA 24, 32) + 5 x CA64E (SM)

Modules: CA64 ( PP, EPS, ADR, O-R, O-ROC,O-OC, OPS- OC, OPS- R, OPS- ROC,

VGM- 16, SR, PTSA) + 4x CA64E ( SM)

PYRONIX: MATRIX 424, 6, 816, 832, 832+

TEXECOM: PREMIER 412, 816, 832, 48, 88, 168, 640

TELMOR: TCA- 824, 4x (TEX800, TMT1)

ROGER: PR402, CPR 32-SE

EBS: PX 202A

PULSAR: 5x (MS1012, MSR1012, MSRK1012)

5x (MS2012, MSR2012, MSRK2012)

8. Technical parameters:

Battery compartment:

17Ah / 12V

Transformer / power supply

compartment:

TOR: 50÷150VA, TRP: 20÷80VA, TRZ: 20÷80VA / series Pulsar

PS..., PSB..., PSBOC...

Tamper protection:

2 x C/NO terminals (C/NC closed housing), 0,5A@30VDC/50VAC

Mounting dimensions:

W=19", H=7U

Enclosure dimensions:

W=430, H=310, D=150 mm

Net/gross weight:

6,20 / 6,75 [kg]

Finish:

steel plate 1mm, color RAL9005

Application:

Indoor

Notes:

- fixing on the front RACK 19'’ rails

- 10 M6 screws with cage nuts included

- the enclosure contains a mounting plate (Level I)

- the enclosure is equipped with a hinged mounting shelf

(Level II)

- universal holes in the enclosure for mounting of control panels and

expansion modules of the following companies: DSC, PARADOX,

RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER, EBS

Available accessories:

- MM019 - protective tube ø16 / ø20 - power cord

- MM020 - protective tube ø21 / ø29 - signal wires

- ARAP16P - cable gland fi 16mm

- ARAP21P - cable gland fi 21mm

- transformers of the TOR/TRP/TRZ series: 20÷80VA

- power supplies PS..., PSB..., PSBOC... series

- batteries

Declarations, warranty

CE, 2 years from the production date

MANUFACTURER

Pulsar

Siedlec 150,

32-744 Łapczyca

Phone. (+48) 14-610-19-40, Fax. ( +48) 14-610-19-50

e-mail: [email protected], [email protected]

http:// www.pulsar.pl, www.zasilacze.pl

Popular Enclosure manuals by other brands

SilentiumPC

SilentiumPC Armis AR5 Hardware installation

Thermaltake

Thermaltake V150 TG user manual

MSI

MSI MPG SEKIRA 500X quick start guide

Antec

Antec Dark fleet DF-10 user manual

Nexans

Nexans WTC05 installation manual

Peavey

Peavey DS 1502 Specifications

D-Link

D-Link ShareCenter Pro DNS-1550-04 user manual

Rosewill

Rosewill RX82-U(JBOD) user manual

QNAP

QNAP SAS JBOD CLI 1.0 user guide

GAMDIAS

GAMDIAS Talos P1 Quick installation guide

Auvs

Auvs KR615 user manual

Digitus

Digitus DA-71114 manual

CommScope

CommScope FDH 3000 user manual

FS FHD-FWME4 quick start guide

JBL

JBL CS1215T owner's manual

NewerTech

NewerTech Voyager S3 user guide

Savio

Savio ARMOR X1 user manual

Alfa Network

Alfa Network AWAP02O Specifications