4
Batteries should be removed from the device if it is not used for a long period of time
to avoid damage through leaking. Leaking or damaged batteries might cause acid burns
when in contact with skin, therefore use suitable protective gloves to handle corrupted
batteries.
Batteries must be kept out of reach of children. Do not leave the battery lying around,
as there is risk, that children or pets swallow it. Batteries must not be dismantled,
short-circuited or thrown into fire. Never recharge non-rechargeable batteries. There is a
risk of explosion!
3.3 Miscellaneous
Repair works must only be carried out by a specialist/ specialist workshop.
If you have queries about handling the device, which are not answered in this
operating instruction, please check with the distributor for further help.
4. Operating Elements
1,2,3,4 -Select a battery compartment to customize
<<MODE>> and/or <<CURRENT>>.
MODE-Select mode: charging, testing. The button should
be held down for more than one second to activate mode. To
customize a single compartment-first press 1-4.
DISPLAY-selection of displayed information: current;
process time, voltage, capacity and inner resistance.
CURRENT -selection of the charge/ discharge current value.
Button Works in the first eight seconds after inserting batteries,
or after activation of mode selection.
5. Power Supply
Only the shipped power adapter is allowed to be used for this charger!
When the charger is powered up, all LCD segments will light up
momentarily. The “null” icon will be shown until any batteries are inserted.
6. Operation
Once a rechargeable battery is inserted, its present
voltage (for example,”3.7v”) will be displayed for 4 seconds,
then “300mA Charge” will be shown on display for another 4
seconds as the default charging current. If MODE or
CURRENT button is not pressed during these 8 seconds, the
Charging process will start. After that charging current and/or
mode can be changed by activation <<MODE>> or by pressing 1-4 and
editing appropriate compartment. Discharged or defective batteries may
not be able to charge, and the display will show “zero” icons. Sometimes,
for fully discharged batteries “slow” charger will be more effective
Afterwards, the charging current can no longer be changed without
reinserting the rechargeable batteries or re-power up the charger. If completely empty or
defective batteries are inserted into the charger, the “null” icon will be displayed on the
display and the charger will refuse to Charge them. Sometimes those completely empty
