protech BS-W025 series User manual
USER
MANUAL
BS-W025
Intel 6th/7th Gen. CoreTM /
Pentium / Celeron Industrial
Wallmount System with DC
Power Input
BS-W025 M2
BS-W025
Intel 6th/7th Gen. CoreTM / Pentium /
Celeron®Industrial Wallmount System
with DC Power Input
COPYRIGHT NOTICE & TRADEMARK
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
This manual is copyrighted in September 2017. You may not
reproduce or transmit in any form or by any means, electronic, or
mechanical, including photocopying and recording.
DISCLAIMER
This user’s manual is meant to assist users in installing and setting up
the system. The information contained in this document is subject to
change without any notice.
CE NOTICE
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
FCC NOTICE
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any change or modifications to the equipment
not expressly approve by the party responsible for compliance could
void your authority to operate such equipment.
CAUTION: Danger of explosion may occur when the battery
is incorrectly replaced. Replace the battery only with the
same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s
instructions.
WARNING: Some internal parts of the system may have high
electrical voltage. We strongly recommend that only qualified
engineers are allowed to service and disassemble the
system. If any damages should occur on the system and are
caused by unauthorized servicing, it will not be covered by
the product warranty.
i
Contents
1Introduction .........................................................................................1-1
1.1 About This Manual ....................................................................1-2
2Getting Started....................................................................................2-1
2.1 Packing List...............................................................................2-2
2.2 System Overview ......................................................................2-3
Front View.........................................................................................2-3
Rear View..........................................................................................2-3
Top View ...........................................................................................2-4
Side View..........................................................................................2-4
Quarter View.....................................................................................2-5
2.3 BS-W025 Specifications............................................................2-6
2.4 Safety Precautions....................................................................2-8
3Hardware Configuration.....................................................................3-1
3.1 External System I/O Ports Diagrams ........................................3-2
Front I/O Ports Diagram....................................................................3-2
Rear I/O Ports Diagram ....................................................................3-2
3.2 Jumper & Connector Quick Reference Table............................3-3
3.3 Component Locations ...............................................................3-4
3.4 How To Set Jumpers.................................................................3-6
3.5 COM Port and Connectors........................................................3-8
3.6 Clear CMOS Data Selection ...................................................3-10
3.7 COM Port RI / Voltage Selection.............................................3-11
3.8 Digital I/O Port Connector .......................................................3-12
ii
3.9 Keyboard & Mouse Port..........................................................3-13
3.10 DVI (Digital Video Interface) Port............................................3-14
3.11 VGA Port .................................................................................3-15
3.12 Front Panel Connector............................................................3-16
3.13 LAN & USB Port......................................................................3-17
3.14 Line-in, Line-out, Mic-in Port...................................................3-19
3.15 RS-232/422/485 (COM2) Selection ........................................3-20
3.16 COM2 Auto Detection Selection..............................................3-21
3.17 Hardware Power Failure Selection..........................................3-22
3.18 Flash Descriptor Override Selection .......................................3-23
3.19 LAN2 Enable / Disable Selection............................................3-24
3.20 Mini PCIE Voltage Selection ...................................................3-25
3.21 VCCIO Voltage Selection........................................................3-26
3.22 MINI PCI Express Slot ............................................................3-27
3.23 PCI Express Slots ...................................................................3-28
3.24 CPU / System Fan Connectors...............................................3-32
3.25 Serial ATA (SATA) Connectors ................................................3-33
3.26 Internal USB 3.0 Connector ....................................................3-34
3.27 Internal USB 2.0 Conncetors ..................................................3-34
3.28 Display Port Connector ...........................................................3-35
3.29 Power Input Connectors..........................................................3-36
3.30 Speaker Connector .................................................................3-37
iii
3.31 LPC Connector........................................................................3-37
4Software Utilities.................................................................................4-1
4.1 Introduction................................................................................4-2
4.2 Installing Intel RST Driver Utility (For Q170/C236 SKU)...........4-7
4.3 Intel®RapidStorage Technology Option ROM ..........................4-7
5BIOS SETUP ........................................................................................5-1
5.1 Introduction................................................................................5-2
5.2 Accessing Setup Utility..............................................................5-3
5.3 Main...........................................................................................5-6
5.4 Advanced ..................................................................................5-7
Advanced - Trusted Computing ........................................................5-8
Advanced - ACPI Settings ..............................................................5-10
Advanced –PCH-FW Configuration...............................................5-11
Advanced –F81866 Super IO Configuration..................................5-12
Advanced –Hardware Monitor .......................................................5-19
Advanced - Smart Fan Mode Configuration ...................................5-21
Advanced - F81866 Watchdog Configuration.................................5-22
Advanced - CPU Configuration.......................................................5-23
Advanced - SATA Configuration (AHCI Mode) ...............................5-25
Advanced - Network Stack Configuration.......................................5-27
Advanced - USB Configuration.......................................................5-29
5.5 Chipset....................................................................................5-30
Chipset - System Agent (SA) Configuration....................................5-31
Chipset - Graphics Configuration....................................................5-33
Chipset - SA Configuration > PEG Port Configuration ...................5-35
Chipset –SA Configuration > Memory Configuration.....................5-36
iv
Chipset –PCH-IO Configuration.....................................................5-37
Chipset - PCI Express Configuration..............................................5-38
5.6 Security ...................................................................................5-47
5.7 Boot.........................................................................................5-49
BOOT > CSM Configuration..............................................................5-52
5.8 Save & Exit..............................................................................5-54
Appendix A System Diagram......................................................A-1
BS-W025 System Exploded Diagram ......................................................A-2
Appendix B Technical Summary................................................B-1
Block Diagram ..........................................................................................B-2
Interrupt Map ............................................................................................B-3
I/O MAP..................................................................................................B-17
Memory Map...........................................................................................B-20
Configuring WatchDog Timer .................................................................B-23
Flash BIOS Update.................................................................................B-25
v
Revision History
The revision history of BS-W025 User Manual is described below:
Version No.
Revision History
Date
M1
Initial Release
2017/09/20
M2
•Revised the operating voltage for the power supply
as DC 24V in the Safety Precaution section.
•Modified Chapter 4 Software Utilities.
•Modified Chapter 5 BIOS Setup.
•Modified Appendix B.
•Corrected typos in BS-W025 User Manual.
2017/10/03
BS-W025 SERIES USER MANUAL
Page: 1-1
1 Introduction
This chapter provides the introduction for BS-W025 system
as well as the framework of the user manual.
The following topic is included:
•About This Manual
Chapter 1 Introduction
BS-W025 SERIES USER MANUAL
Page: 1-2
1.1 About This Manual
Thank you for purchasing our BS-W025 system. The BS-W025 provides faster
processing speed, greater expandability and can handle more tasks than before. This
manual is designed to assist you how to install and set up the whole system. It
contains 5 chapters and 2 appendixes. Users can configure the system according to
their own needs. This user manual is intended for service personnel with strong
hardware background. It is not intended for general users.
The following section outlines the structure of this user manual.
Chapter 1 Introduction
This chapter provides the introduction for the BS-W025 system as well as the
framework of the user manual.
Chapter 2 Getting Started
This chapter describes the package contents and outlines the system specifications.
Read the safety reminders carefully on how to take care of your system properly.
Chapter 3 System Configuration
This chapter describes the external I/O ports, outlines the locations of the
motherboard components and their respective functions. You will learn how to set the
jumpers and configure the system to meet your own needs.
Chapter 4 Software Utilities
This chapter contains helpful information for proper installations of the Intel Chipset
Software Installation Utility, VGA Driver Utility, LAN Driver Utility, RAID Driver
Utility and Sound Driver Utility.
Chapter 5 BIOS Setup
This chapter indicates you how to change the BIOS configurations.
Appendix A System Assembly
This appendix gives you the system exploded diagram and part numbers of the
BS-W025.
Appendix B Technical Summary
This appendix provides the information about the allocation maps for the system
resources, Watchdog Timer Configuration and Flash BIOS Update.
.
Table of contents
Other protech Industrial PC manuals
Popular Industrial PC manuals by other brands
Dell
Dell Embedded Box PC 5000 Installation and operation manual
IBASE Technology
IBASE Technology ASB200-918 Series user manual
Lenovo
Lenovo ThinkCentre M90q Hardware Maintenance Manual
IXXAT
IXXAT Econ 100 Hardware manual
Kontron
Kontron KBox A-151-TGL user guide
AXIOMTEK
AXIOMTEK ICO500-518 Series user manual