ProT Ar-Ge FADOS7F1 User manual

Endüstriyel Proje Tasarım Ar-Ge Ltd. Şti.

Industrial Project Design R&D Co. Ltd.

FADOS7F1 (10V3)

FAULT DETECTOR AND PC OSCILLOSCOPE

USER MANUAL

PRODUCT DESCRIPTION

FADOS7F1 Fault Detector and PC Oscilloscope is basically computer-based VI

(Voltage-Current) test equipment. It connects to PC via USB port and works 5V

voltage by taking energy from USB port. FADOS7F1 works by applying sinusoidal

voltage through a serial resistor point of touched on circuit and voltage-current graph

is displayed on the computer screen. In addition to this feature, computer software

by analyzing voltage-current graph to displays equivalent circuit diagram and values

of electronic components. Equivalent circuit diagram and measurement of electronic

components values features make successful analyze, but sometimes software

makes possibility of faulty analysis so that it does not used for measurement on the

circuit, these features used for convenience to user in giving an information for

finding faulty easily.

Feature of Dual Channel VI test, solid and faulty electronic cards comparable with

touch of same points at the same time and using this method, faulty points out of

tolerance can be detected.

Using feature of recording reference values to memory and comparing data from

memory, it can test easily electronic cards.

In addition to the basic features, FADOS7F1 VI Tester can also be used dual-channel

oscilloscope, square wave generator and analogue voltage output.

SECURITY

1- FADOS7F1 is produced by using lead-free solder and designed in accordance

CE regulations; users must use the following usage rules.

2- Chassis must be isolated and grounded. Connect the chassis ground

connection point of the probe is the same as your computer, careful to avoid

the potential difference.

3- Feature of oscilloscope, if probe key is set to 1X, it measures ±5

Voltage, probe key is set to 10X, it measures ±50 Voltage. Do not use

above these limits of voltage.

4- It tests electronic cards without giving to energy. Before test, electronic card

and the devices must be made high-voltage capacitor discharges.

5- The users of this equipment must have knowledge and experience to repair of

electronic cards. Thus, during using FADOS7F1, do not this mistakes such as

touch chassis to high-voltage, non-isolated ground, test high-voltage capacitor

discharges. Without enough knowledge and experience in this subject, keep

away high voltages such as mains voltage which can damage the system and

themselves.

6- Giving high-voltage from probes, series resistors which contained in the device

damaged and makes the circuit an open circuit. In this case, the computer

port which is connected device via USB port damaged but observed in other

parts of the computer is not damaged.

TECHNICAL FEATURES

A- FAULT DETECTION FEATURE:

Output Voltage : ±1V, ±2V, ±5V, ±10V

Output Resistance : Current Level: Low : 47 KΩ

Medium : 2,7 KΩ

High : 550 Ohm

Short Circuit Current : Low Current : 212 μA (10V)

Medium Current : 3.7 mA (10V)

High Current : 18 mA (10V)

Test Frequency : Very Low Frequency : 2 Hz

Low2 Frequency : 3.4 Hz

Low1 Frequency : 10.3 Hz

Test Frequency : 27.3 Hz

High Frequency : 780 Hz

Other Feature :1: Automatic selection steps of voltage, current, frequency.

2: Equivalent circuit diagram.

3: Resistor, capacitors, diodes etc measurement.

4: Recording data and comparing with recorded data.

5: 3 graphs at different adjustments can be screened

simultaneously.

B- PC OSCILLOSCOPE FEATURES:

Sampling Rate : 400 K/S

Input Voltage : Probe 1X: ±5 V Probe10X: ±50 V

Channel / ADC : 2 Channel / 12 Bit

Sensivity : 2.5 mV

Image Rate : 0.02 mS/div….100 mS/div

Instant Memory : 64 Kbyte

C- DIGITAL AND ANALOG OUTPUT:

Output : Channel 2

Output Voltage : -5V….+5V (Adjustable)

Frequency (Digital): From 0.2KHz to 25KHz

Table 1: FADOS 7F1 Technical Features

Product Content Physical Features (Without Accessories)

1 FADOS7F1 Product Dimensions : 75 mm Width

2 Oscilloscope Probes : 40 mm Height

1 USB Cable : 20 mm Deep

1 Software CD Weights : 450 gram with all accessories

1 Hand Bag for FADOS7F1

Picture 1: FADOS 7F1, USB Cable, Probes

CONTENTS

Page

PRODUCT DESCRIPTION .............................................................................. 2

SECURITY...................................................................................................... 3

TECHNICAL FEATURES .................................................................................. 4

PRODUCT CONTENT ............................................................................................... 5

PHYSICAL FEATURES (WITHOUT ACCESSORIES)............................................................. 5

FADOS 7F1 FAULT DETECTOR AND PC OSCILLOSCOPE................................ 7

USAGE AREAS ...................................................................................................... 7

UNIQUE FEATURES ................................................................................................ 7

INSTALLATION .....................................................................................................10

DRIVER INSTALLATION ..........................................................................................10

GENERAL USAGE INFORMATION ................................................................ 11

VI TEST –PROGRAM FEATURES OF FAULT DETECTON PART..................... 13

PASSIVE COMPONENTS R, L, C (RESISTOR, INDUCTOR, CAPACITOR)

CURRENT –VOLTAGE VI GRAPHS............................................................... 15

RESISTOR VI GRAPH.............................................................................................15

CAPACITOR VI GRAPH ..........................................................................................17

CAPACITOR QUALITY TEST AND RC CIRCUIT ...............................................................17

INDUCTOR VI GRAPH ............................................................................................19

SEMI CUNDOCTORS .................................................................................... 20

DIODE,ZENER DIODE VI GRAPH..............................................................................20

TRANSISTOR –TRIAC –THYRISTOR –FET –IGBT VI GRAPH ..........................................22

TESTING INTEGRATED (IC - SMD INTEGRATES)........................................ 23

ELECTRONIC CIRCUIT REGISTRATION MEMORY AND COMPARISION WITH

MEMORY...................................................................................................... 25

COMPARISION TESTING COMPONENTS OF ELECTRONIC CIRCUIT .......... 26

3G –3 DIFFERENT GRAPH DISPLAY........................................................... 32

OSCILLOSCOPE –PROGRAM FEATURES..................................................... 33

RECOMMENDATIONS .................................................................................. 34

WARRANTY AND CONDITIONS................................................................... 35

FADOS 7F1 FAULT DETECTOR AND PC OSCILLOSCOPE

Fault Detector and PC Oscilloscope have been especially developed to determine

faults at all type electronic cards by ProT Ar-Ge Industrial Project Design R&D Ltd.

Co. The main purpose, make it easier to find fault of electronic cards. It is included

oscilloscope, signal source, multimeter etc.

Usage Areas

ECU Automotive electronic cards, servo-step motor drivers, cards of medical devices,

military electronic cards, computer and monitor cards, television-audio-radio cards,

cards of textile machines, mobile phone electronic cards etc. (all type electronic

cards.)

Unique Features

Equivalent circuit diagram and measuring values of all components features are

unique in the World. As an example; if resistor connected parallel to capacitor, it

shows circuit diagram and value of them at the same time.

Picture 2: FADOS 7F1

FADOS 7F1 includes 7 important functions:

1. Double - Channel Fault Detection (VI Graph)

Comparing solid and faulty card without giving energy.

2. Equivalent Circuit Diagram

Composing R, C, or Diode Circuit Diagram according to the point touched.

3. Measuring of Resistor, Capacitor, and Diode

Feature of measuring the value of touched point.

4. Fault Detection by Comparison from Memory

By recording solid card to memory, comparing faulty card from memory.

5. Double –Channel Digital PC Oscilloscope

As occasion may require, device can be used as oscilloscope.

6. Square Wave Signal Output

Ch.1 is used as oscilloscope and Ch.2 is used as signal generator.

7. Analogue Voltage Output

Ch.1 is used as oscilloscope and Ch.2 gives analog voltage output.

Picture 3: FADOS 7F1 Fault Detector –VI Tester Screen

Picture 4: FADOS 7F1 Oscilloscope –Analog Output Screen

INSTALLATION

1- Connect FADOS7F1 to PC via USB. Install drivers in CD.

2- Click FADOS7F1 SETUP.exe and install program.

3- Run FADOS7F1.exe

DRIVER INSTALLATION

1- Connect FADOS7F1 to PC via USB. Windows XP 'New Hardware Found' with

warning direct you to install the driver. Insert the CD into the CD rom and

install the driver.

2- Windows Vista and Windows 7 open Device Manager.

On the desktop right-click on My computer and click Properties of open

the Control Panel and double-click the System icon.

In the System Properties window click the Hardware tab.

In the Hardware tab click the Device Manager Button.

Click Start

Click Settings

Click Control Panel

In the Control Panel double-click the Systems icon.

In the System Properties window click the Hardware tab.

In the Hardware tab click the Device Manager Button.

3- Find “Prot Ar-Ge FADOS7F1 Fault Detector” inside Universal Serial Bus

Controllers and click right then, select “update software driver”.

4- Select (Search for the best driver location) and click browse, find FADOS7F1

Driver’s folder.

5- Click OK and install driver.

Table of contents

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual