GSM&PSTNFWT-8848 User'sManualVersion1.1
7
*#04#*0755# 10--command *0755—area code Max5numbers,use"*"instead ifareacode
isless than 5digits.
6)Setting IPnumbers
*#05#17911# 05--command 17911—IPnumbers Max5numbers,use"*"instead ifIPnumber
isless than 5digit.
7HideCaller ID(been sentout)Setting
*#13#01# 13--command 01--value Max-02 Min-00 Default setting is00
00-- presentation indicatorisused according tothe subscription ofthe CLIRservice
01 –CLIRallowed
02 –CLIRprohibited
Notice:ThisSetting needsGSM carriersupport.
8)Bar incoming call setting
*#14#00# 14--command 00--value 00--no barring, 01--set barring default setting --00
9)FSKsetting (optional)
*#17#00# setting callerID
17-order, 00-value, 00-DTMF, 01-FSK, default setting is00
Thissetting need terminalhasFSK Chipset support
10)Billing Modesetting
*#15#00#
15--command, 00-value, 01-reversalpolarity, 02-12 KHz, 03-16 KHz, default setting-- 01
11 IMEI changeSetting (forSIM500W/ M10 Moduleonly)
1. WriteIMEI toRAM
*#18#IMEI no.#, 18--command, IMEI No. --15-digit IMEI no.
2. Check IMEI, ifit isright, and then writeit tomodule.
*#19#IMEI no.#, 19--command, IMEI No. --15-digitsIMEI No.
Notice: Step 1and Step 2, IMEI no. must be same.
12)PinLock &NetworkLock Setting (optional)(Shouldconfirmbeforeorder)
2) PINLock
1, Setto open PINcodecheck and automaticPINlock function
*#07#*1234# 07-command, 1234-the current SIMcardPINcode
Ifsetsuccessfully,the devicewillopen PINcode check,and automaticallychange the current
SIMCardinto"PINon"from"PINoff"
2, Setto close PINcodecheck and automaticPINlock function
*#08#*1234# 08-command, 1234-the current SIMcardPINcode
Ifset successfully, the devicewill closePINcode check and automaticPINlock function.
