Projectiondesign Action three 1080 User manual

addendum

english

HDMI to DVI cable

RS232 cable

The Crystalio II projector control is a system for controlling the projector

through the

video processor. To control the projector, the RS232 or network connector

must be connected. see illustration for details. Read the crystalio and the

projector userguide for further information.

From the Crystalio II to the Action! model three 1080, only a single link of

connection is needed for basic operation. This link is a HDMI-to-DVI cable

that can be as long as up to 25m / 75ft. This cable will carry a 1920x1080

progressive signal, processed in the Crystalio II. In addition, for projector

control, a similar length RS232 cable should be connected. This will give full

access to all functions of the projector, through the same menu interface as

that of the Crystalio II.

The Crystalio II will process and forward all incoming signals to the

projector, processed and scaled up to it’s native 1920 x 1080 resolution.

This will be the same whether the input is standard TV or DVD signals at

480i or 576i (NTSC or PAL), or whether the input is High Deﬁnition, 1080i or

720p.

Main features of the Action! model three 1080 / Crystalio II combination

include;

• Broadcast Quality video processing.

• Single Link between source connections and projector unit.

• Industry’s best connectivity and compatibility.

• Single remote control and menu interface for all system control.

english

Crystalio II projector control

FEATURES

Power ON

Turns the projector ON

Power OFF

Turns the projector OFF

Color Management

The color temperature can be calibrated as desired.

The Not Corrected setting displays the native color temperature of the projector.

The Temperature setting is adjustable in steps of 100 Kelvin from 3200 - 9200K

Color Temperature

See Color Temperature submenu for details

Lamp Selection

Select dual or single lamp mode. Dual Lamp mode, both lamps are powered

Single Lamp 1, only lamp 1 is powered.

Single Lamp 2, only Lamp 2 is powered

Lamp Eco Mode

When Lamp Eco Mode is set to ON, the lamps are running at reduced power to

increase lamp life.

Lamp Power

See Lamp Power submenu for details.

Shutter ON/OFF

See Shutter submenu for details

Iris

Select Iris, then arrow keys to adjust to desired combination of

brightness and contrast.

Focus

Select Focus, then arrow keys to focus the image

Shift

Select Shift, then the arrow keys to shift the image up, down or sideways.

The maximum lens shift are 110% vertically and 90% horizontally.

Zoom

Select Zoom, and then use arrow keys to zoom in or out in the picture.

Gamma

See Gamma submenu for details.

Orientation

See Orientation submenu for details

System Information

Displays information about the network connection and projector status.

Projector control

english

Projector control submenus

Color Temperature

use arrow keys on the remote or the crystalio to adjust the color temperature in steps of

100 Kelvin from 3200 - 9200K along the black body curve of the CIE color chart

Lamp Power

Use the arrow keys UP/Down to select lamp 1 or lamp 2.

Use the RIGHT/LEFT keys to adjust the lamp power. The lamps are adjustable from 80

- 100% of maximum power.

Gamma

The source image is adapted to characteristics typical to certain applications. This

enables an optimized image depending on whetever the source is Film or video based,

computer, etc.

MENU SYSTEM

english

Orientation

Select between desktop front, desktop rear, ceiling front and ceiling rear mode.

The image will be ﬂipped and/or reversed accordingly.

System Information

Displays information about the projector network connection and the status.

More Control

For more detailed control, the projector has two protocols built in for control that can

be used either through the RS232 connector or through the LAN connector. A simple

instruction set (SIS) ASCII protocol gives access to the most frequently used commands.

In addition, a binary protocol is available where each command is a series of 32 bytes in

one packet. The protocols allow for both SET and GET operations.

a detailed description of conﬁguration, use and command set is described in a separate

document “RS232 and LAN communication protocol and command set”

601-0092-00

This manual suits for next models

Table of contents

Other Projectiondesign Projector manuals

Projectiondesign

Projectiondesign F32 User manual

Projectiondesign

Projectiondesign cineo Manual

Projectiondesign

Projectiondesign F3 xga User manual

Projectiondesign

Projectiondesign iVision 30sx+ W-3D User manual

Projectiondesign

Projectiondesign F32 SX+ User manual

Projectiondesign

Projectiondesign avielo spectra User manual

Projectiondesign

Projectiondesign F1 sxga User manual

Projectiondesign

Projectiondesign cineo Manual

Projectiondesign

Projectiondesign one mk II User manual

Projectiondesign

Projectiondesign F1 sxga User manual

Projectiondesign

Projectiondesign F35 User manual

Projectiondesign

Projectiondesign F3 xga Manual

Projectiondesign

Projectiondesign cineo3+ 1080 User manual

Projectiondesign

Projectiondesign F1+ SXGA+ User manual

Projectiondesign

Projectiondesign three 1080 User manual

Projectiondesign

Projectiondesign WUXGA 1080 User manual

Projectiondesign

Projectiondesign Action three User manual

Projectiondesign

Projectiondesign F80 User manual

Projectiondesign

Projectiondesign Action three 1080 User manual

Projectiondesign

Projectiondesign F10 1080 User manual

Projectiondesign

Projectiondesign F10 AS3D User manual

Projectiondesign

Projectiondesign F12 WUXGA User manual

Projectiondesign

Projectiondesign evo2sx+ User manual

Projectiondesign

Projectiondesign evo XGA User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual