3
•Make sure that the plug of the adapter is inserted into the socket
provided.
The adapter plug may be different depending on the region. Please make
confirmation that the specification of the adapter is consistent with the
specification of electrical appliances in your region. Failure to do so may result
in overheating of the equipment, electric shock, fire, chemical leakage inside
the battery, explosion, and other serious consequences.
•If the plug of the adapter or the cable is damaged, discontinue use
immediately.
Do not change the battery unless the charger plug is fully inserted into the
socket.
•Do not touch the power cord with wet hands.
Touching the electric wire with wet hands may cause electric shock. When
pulling out the electric wire, hold the head of the electric wire to the right to pull
out the wire. Don't pull the electric wire directly. Otherwise, the electric wire
may break, causing electric shock and fire.
•Do not immerse the product in rainwater.
If the case comes into contact with any liquid, wipe it dry immediately. If water
or other liquid enters the inside of the unit, turn off the power immediately.
Continuous use may damage the product.
•Clean the dust from the adapter plug and data cable.
If exposed to a dusty and dusty environment for a long time, the dirt around
the electrical equipment will accumulate moisture. This This may cause short
circuit and fire.
•Please use the company's original adapter to charge the product.
Use of non-original power supply accessories may result in overheating,
electric shock, fire, chemical leakage inside the battery, explosion and other
serious consequences.
•Do not use abrasives, isopropanol, or solvents to clean the unit's casing.
Doing so may damage the product casing.
•The product temperature may rise after a long period of charging.
You may feel burning heat when your hands touch the sensors.
•Problem caused by water condensation.
Do not move the unit from a high temperature environment to a low
temperature environment or from a low temperature environment to a high
temperature environment within a short period of time. This may cause water
condensation on the inside and outside of the instrument. In such a condition,
the instrument should be placed in a portable box or plastic bag. Before use,
allow it to return to ambient temperature and take it out for use. If there is
water condensation inside the product, turn off the power immediately. Failure
to do so may damage the product. Operation is until the water condensation
has disappeared.
•Avoid exposing the product to impacts (e.g. collisions, falls, etc.).
This may cause damage to the product. Please avoid such operation.
•Long term storage and regular recharging.
If the product is not to be used for a long period of time, it should be stored in
a cool, dry place. If the product is to be stored for a long period with the battery
installed, it should be charged regularly. Otherwise, the battery will be
exhausted, and its life will be shortened.