PROF DC 16E User manual
DC 16, DC 20
Instruction Manual for Dehumidifier GB 1
Ilmankuivaimen käyttöohje FI 13
Bruksanvisning för avfuktare
SE 26
Bruksanvisning for avfukter
NO 39
Осуш тель воздуха, руководство для пользователя RU 52
Õhukuivati kasutusjuhend
EE 65
Instrukciju rokasgrāmata gaisa žāvētājs
LV 78
Sausintuvas gaminių naudojimo instrukcija
LT 91
Дапаможнік па экплуатацыі асушальніка паветра асушальнік паветра BE 104
EN
Dehumidifier
Instruction Manual for DC 16, DC 20 series
☆
☆☆
☆
Read and retain these instructions for future reference
1
Contents
Please take time to read this manual carefully before use and save it for
future reference
Page
Model no reference
Specification
How it works
Where to position
Before use
Parts
Operation
Drainage
Maintenance
Trouble shooting
1
2
3
3
4
5
6, 7
8, 9
10, 11
12
Model no. reference
DC 16E … 16 L/day dehumidifier
DC 20E … 20 L/day dehumidifier
DC 16EP … 16L/day dehumidifier w/ PTC heater
DC 20EP … 20L/day dehumidifier w/ PTC heater
For additional UV light function, the model no will end with “T”, such as DC16ET or
DC 16EPT
2
Specification
Model no. DC 16E
DC 16E
DC 16EP
DC 16EP
DC 20E
DC 20E
DC 20EP
DC 20EP
Power supply 220V-240V~, 50Hz
Moisture removal capacity 16L/day 20L/day
Power/Ampere
consumption for PTC use
N/A 780 W/3 4A N/A 830 W/ 3 6A
Power /Ampere
consumption *
280W/ 1 3A 370W/ 1 7A
Compressor Rotary
Refrigerant R134a
Working range 5 ~ 35
o
C
Water tank capacity 5 5 L
Size (WxDxH) 410 x 210 x 545 mm
N W 12 kgs 12 5 kgs
Above is measured under RT 30
o
C, RH 80%
The data marked with * may vary for technical reasons For greater
precision, please refer to the rating label placed on the product
3
How it works
This product is a dehumidifier It controls relative humidity by passing the air
through the unit, forcing the excess moisture to condensate over the cooling
elements Contact with this cold surface causes the moisture in the air to
condense This condensed water then drains safely into the water tank The dried
air then passes through the condenser where it is slightly warmed and re-enters
the room at a slightly elevated temperature
Where to position
Excess moisture will travel
throughout your home, in
the same way that cooking
smells waft to every room in
the house For this reason,
the dehumidifier should be
positioned, so that it can
draw this moist air towards
it from all over the home
Alternatively, if you have a
serious problem in one area
you can begin by
positioning the dehumidifier
close to this area and later
moving it to a more central
point
When positioning the
dehumidifier, ensure that it
is placed on a level surface
and that there is a minimum
of 10 cm (4") of space on
either side of the unit to
allow for efficient airflow
This dehumidifier is fitted
with castors for extra
mobility, if you move the
unit, it should first be
switched off and the water
tank emptied
We do not recommend the
use of an extension lead, so
please try to ensure that the
unit is sufficiently close to a
fixed mains socket If it is
necessary to use am
extension lead, please
ensure the diameter of the
wires of the cable is at least
1 mm2
When the dehumidifier is in
operation, outside doors
and windows should be
closed when necessary for
most efficient use
DRY
WARMER AIR
FAN
MOTOR
WATER TANK
CONDENSER
EVAPORATER
MOIST
SATURATED AIR
COMPRESSOR
WATER TANK
MICRO SWITCH
4
Before use
Caution!
Always keep the unit in vertical position
Leave the unit to stand for one hour before connecting to the mains
supply after transport or when it has been tilted (e g during cleaning)
Keep all foreign objects away from the air intake or output openings
The mains supply must conform to the specification shown on the
rating plate at the back of the unit
If the supply cord is damaged, it must be replaced by an approved
service representative or a similar qualified person in order to avoid a
hazard
Never use the plug to start and stop the unit Always use switch on the
control panel
Before moving the unit, first switch off, then unplug and empty the
water tank
Don't use bug sprays or other flammable cleaners on the unit
Never pour or spray water over the unit
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS
(INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR
MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND
KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A
PERSON RESPONSIBLE FOR THEIR SAFETY CHILDREN SHOULD
BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH
APPLIANCE
IMPORTANT!
Do not use this unit at ambient temperatures below 5
o
C, to prevent the
possibility of a heavily ice up evaporating coil
5
Parts
Front
1 Control panel
2 Cover for air outlet
3 Air outlet
4 Water full indicator
5 Water tank
6 Handle
Rear
7 Air filter / air inlet
8 Power cord
9 Handel
10 Hole for continuous
drainage
11 Water tank
12 Caster
Assembly of the filters
Grille Washable
filter
Active
carbon filter Filter fixer
6
Operation
Control panel
1 Heat button (only for the
model with heat function)
2 UV light button (only for the
model with UV function)
3 Timer
4 Display window
5 Speed (ventilation) button
6 Humidity selection button
7 ON/OFF button
Display window
1 Humidity display: continuous de-humidifying , 50%, 60%, 70%, 80%
2 Ambient humidity condition: good fair, bad
means 50% ≤ambient room humidity ≤70%
7
means 30% ≤ambient room humidity < 50% or 70% < ambient room
humidity ≤80%
means the ambient room humidity is higher than 80%
3 compressor is in progress In case the de-frost function is working, the
water drops will flash
compressor is not in progress
water full
4
Heat indicator (only for the model with heat function): While you press the
heat button and the ambient temperature is lower than 25
o
C, the heat indicator
will light on and the heater will work At this time, the fan speed will keep at
high speed only However, if the ambient temperature is higher than 25
o
C, the
heat indicator will not light on and the heater will not work, either
* This PTC
heater is protected by thermostat & thermal fuse for overheat protection
5 UV ( ultraviolet ) indicator, only for the model with UV light * UV can kill the
bacteria in the air
6 Timer indicator, 1 to 24 hours
7 Room humidity indicator, can display the room temperature in Celsius degree
(
o
C) or Fahrenheit (depending on the version you purchased) by pressing
“HUM” button for at least 2 seconds
8 Fan speed/ventilation indicator: high speed, low speed
Operation
1 Plug the unit into a correct mains socket (Please refer to the rating label at the
rear of the unit )
2 Press button ON/OFF to turn on the unit The compressor will start to work in
continuous mode
3 Press button HUMIDITY to set the room humidity you need: continuous
de-humidifying , 50%, 60%, 70% or 80%
4 Press the speed button to choose the ventilation speed, high or low
5 To turn off the unit, press button ON/OFF again
6 The direction of the air outlet can be adjusted by hand
8
Drainage
While the water tank is full, the compressor will stop for self-protection and:
The sign of water full will flash
The unit will buzz * For stopping the buzz, you may press the ON/OFF button
to turn off the unit
The water level window will turn into red
To move the water tank, pull it out squarely from the unit by using the handle at
the water tank
After empting the water tank, place the water tank into space Make sure it is
properly positioned, in order for the 'water full' sign to go out and your
dehumidifier is operating
Please note, i
n case, the water tank has not been positioned well, the water level
window will turn into red and the unit will buzz, too
As the water tank is full
or has not been
positioned well, the
water level window will
turn into red.
To move the water tank,
pull it out squarely from the
unit by using the handle at
the water tank.
This manual suits for next models
7
Table of contents
Languages:
