PROCRAFT HPC-0023 User manual
Li-ion
Cordless Screwdriver
HPC-0023
PLEASE READ BEFORE USE AND RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
IMPORTANT NOTE:
ALWAYS CHECK THE EQUIPMENT BEFORE USE. IF DAMAGED, DO
NOT USE AND DISCARD.
Please note that your safety is your personal responsibility
-1-
INTENDED USE
THIS DEVICE IS INTENDED FOR DOMESTIC USE AND FOR THE ENVISAGED PURPOSE.
IT IS NOT DESIGNED AND IS NOT FIT FOR COMMERCIAL, INDUSTRIAL OR RENTAL USE.
SAFETY AND WARNING INFORMATION
READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL
Carefully and through read through the entire operator ’s manual before operating this appliance.•
Failuretofollowtheinstructionsmayresultinre,electricshockandorseriousinjury.•
DO NOT remove any labels from this appliance.•
Afterunpackingtheappliance,inspectallofthecomponentsforanydamagethatmayhaveoccurredduringtransit.•
DO NOT operate the appliance if any damage has occurred during shipping and handling. All damaged parts must
be repaired or replaced prior to operating the appliance.
Thisapplianceisnotintendedforusebypersons(includingchildren)withreducedphysical,sensoryormental•
capabilities,orlackofexperienceandknowledge,unlesstheyhavebeengivensupervisionorinstruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.•
WORK AREA
Keepworkareascleanandwelllit.Clutteredbenches,workareasandareaswithinsufcientlightinviteaccidents.•
DONOToperatethisapplianceinareaswhereammableliquids,gasesordustarepresent.Thisappliancecreate•
sparkswhichmayigniteliquidsorfumes.
Keepchildrenawayfromworkareas.Peopleshouldmaintainasafedistanceawayfromtheworkarea.•
Peopleneartheworkareamustalsowearprotectiveclothing.•
ELECTRICAL SAFETY
Thistoolmustonlyberechargedwiththespeciedcharger.•
Whenreplacingthebattery,onlyuseanequivalentbattery.Theuseofanyotherbatterymaycreateariskofre.•
Neverusethecabletocarrythecharger.Keepcableawayfromheat,oil,sharpedges,ormovingparts.Replace•
damagedcableimmediately.Damagedcablesmaycreateare.
PERSONAL SAFETY
Werecommendtheuserwearssafetyequipmentduringuse.•
Avoid distractions while operating any power appliances.•
Neveroperateanyequipmentwhistundertheinuenceofdrugs,alcohol,ormedications.•
Wearsuitableclothing.Removejewellerybeforeusingthisappliance.DONOTwearlosettingclothing,•
necklaces,rings,bracelets,orotherJewellery,whichmaygetcaughtinmovingparts.
Non-skidfootwearandsuitableworkglovesarehighlyrecommendedwhilstworking.•
Wear protective hair covering to contain long hair.•
Protectyoureyes.Theoperationofanypowertoolcanresultinforeignobjectsbeingthrownintotheeyes,which•
canresultinsevereeyedamage.Alwaysweareyeprotectionduringpowerapplianceoperation.Unlessspecied,
Eye glasses are NOT safety glasses.
Beresponsibleforyourhearing.Wearhearingprotectionduringextendedperiodsofoperation.•
DO NOT overreach. Proper footing and balance is a must at all times while using the appliance.•
Insomecaseswheretheapplianceproducesdustasuitableapprovedduskmaskmustbeworn.•
-2-
APPLIANCE USE AND CARE
Knowyourpowerappliance.Readtheinstructionmanualcarefully.Learnitsapplicationsandlimitationsaswellas•
thespecicpotentialhazardsrelatedtothisappliance.Followingthisrulewillreducetheriskofelectricshock,re,or
seriousinjury.
Alwayssecureandsupporttheworkpiece,ifnecessaryuseclampstosecureandsupporttheworkpiecetoastable•
platform.
NOTE:Holdingtheworkpiecebyhandoragainstyourbodyisdangerousandmayleadtolossofcontroland
personalinjury.
Usetherightapplianceforeachjob.Onlyusetheappliancesforitsintendedtask.•
DO NOT• forceasmallappliancetodothejobofalargerappliance.Usingtherightappliancetodotherightjobwill
dotheintendedjobsaferandeasier.
Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable•
foroneappliancemaybecomehazardouswhenusedonanotherappliance.
Keeptheapplianceclean,dryandfreefromoilandgrease.Neverallowtheplasticpartstocomeintocontactwith•
brakeuid,gasoline,petroleum-basedproducts,oranystrongsolventswhichcontainchemicalsthatcandamage,
weakenordestroythehousing,asitcouldcompromisetheintegrityoftheinsulation.
SPECIFIC SAFETY INSTRUCTIONS
DO NOT• placeexcessiveloadsonthedrillthatcausethedrilltoceaseturning.
Neverstartthedrillwhenthebitisincontactwiththeworkpiece.•
Never lay the drill down before its moving parts have come to a complete stop!•
Makesurethedrillbitissecurelymountedinthechuck.Animproperlymountedbitisextremelydangeroussinceit•
canyofforbreakduringdrilling.
Donotwearclothglovesoranecktieasthesecouldbecomecaughtintherotatingparts.•
Hold the appliance securely with both hands.•
Always use the steadying handle supplied with the appliance.•
Always disconnect from the mains supply before changing the drill bit.•
Afteruse,checkyourappliancetokeepitintopcondition.Cleanoutanyaccumulateddust.•
-3-
Components
1. Collet
2.LEDlight
3.Forward/Reverseswitch
4.Chargingsocket
5. Battery indicators
Note:(REDLEDindicates
charging status during charging)
6. Charger
TechnicalSpecications
Screwdriver
Motor 3.6 Volts dc
Chuck: 6.35cmm(1/4”)
NoLoadSpeed: 180RPM
MaximumTorque: 2.5Nm
Weight: 0.35Kg
Switch: Forward/reverse
Charging time: 3-5 hours
Initial Charge Time: 7 hours
Charger
ModelNo XR-DC060300
VoltageRating: AC220-240V~50Hz7W
Output: 6Vdc300mA
UNPACKING INSTRUCTIONS:
This product has been shipped completely assembled.
Carefullyremovethetoolandanyaccessoriesfromthebox.Makesurethatallitemslistedinthepackinglistare•
included.
Inspectthetoolcarefullytomakesuretherearenobreakagesordamagewhichhasoccurredduringshipping.•
DONOTdiscardthepackingmaterialuntilyouhavecarefullyinspectedtheproductandsatisfactorilyoperatedthe•
tool.
Battery Charging
Refer to page 5 for safety warnings.
The battery in this tool has been shipped in a low charge condition
to prevent possible problems. You should charge the battery fully
priortousingthedrillforthersttime.
Only use the charger supplied to charge the battery.
Plugthechargercordintothesocketonthetool.(Fig1)•
Nowplugthechargerintothemainsoutletsocketandswitchon.•
TheREDLEDwillilluminateindicatingcharging.•
NOTE:• theREDLEDwillextinguishwhenthechargingis
completed.
Initially charge could be up to 7 hours. After which in normal•
usage,yourbatteryshouldbefullychargedwithin3to5hours.
Oncethebatteryischarged,switchoffthesupplyatthemains•
outletsocketandremovethecharger.
NOTE:Whilecharging,thechargermayhumandbecomewarmto
touch. This is a normal condition and does not indicate a problem.
DO NOT use the tool while it is connected the charger.
3
4
12
5
6
Fig1
OPERATING INSTRUCTIONS:
WARNING:
Never operate this tool if any parts are missing until the missing parts are replaced. Failure to do so could result in
possibleseriouspersonalinjury.
WARNING: Toolmaystall(ifoverloadedorimproperlyused)causingatwist.Alwaysexpectthestall.Gripthe
screwdriverrmlytocontrolthetwistingactionandpreventlossofcontrolwhichcouldcausepersonalinjury.Ifastall
doesoccur,releasethetriggerimmediatelyanddeterminethereasonforthestallbeforere-starting.
WARNING:
DONOTallowfamiliaritywithtoolstomakeyoucareless.
Rememberthatacarelessfractionofasecondissufcienttoseriousinjury.
Always wear safety goggles or safety glasses with side shields when operate tools. Failure to do so could result in
objectsbeingthrownintoyoureyes,resultinginpossibleseriousinjury.
Installation of accessory bits
Holdthescrewdriverandinstallthehexshankaccessoryintothechuck;
Operation:
Tooperatethetoolinaclockwisedirection,pressthetopsectionof•
therockerswitch.
Tooperatethetoolinaanti-clockwisedirection,pressthebottom•
sectionoftherockerswitch.
Thetoolislockediftherockerswitchisnotdepressedwhichallows•
the tool to be used as a conventional non-powered screwdriver.
NOTE:
TheLEDworklightautomaticallycomesonwhenthescrewdriveris
operated.
Thisprovidesadditionallightingontheworksurfacewhichisusefulin
lower-light situations.
POWER INDICATORS:
•TherearethreeLEDlightsonthebacktopofthescrewdriver,red,
orange and green.
•Whenoperatingtheunitpowerthebatterylevelisindicated
1)GreenLED=60%ormorepowerremaining
2)OrangeLED=40%ormorepowerremaining
3)RedLED=lowerpoweronlyremaining
DRILLING:
This tool is not recommended for drilling in metal or masonry.
Battery Safety Warnings
Intheunlikelyeventthattheelectrolyteinthebatteryshould•
escape,it’sessentialtoavoidcontactwithyourskin.Ifelectrolyte
doescomeintocontactwithyourskin,rinseoffimmediatelywithwater.Intheeventofelectrolytecomesintocontact
withyoureyes,it’sessentialthatyoucontactyourdoctor.
NEVERthrowbatteriesintowaterorontoareasthiswillcauseariskofexplosion!•
Alwaysprotectthebatterypackfromimpacts,andNEVERopenthebatterycasing.•
-4-
Red
Orange
Green
-5-
Battery Charging Safety Warnings
NEVER• usechargeroutdoorsorexposetowetordampconditions.Waterenteringchargerwillincreasetheriskof
electricshock.
NEVER• usethecordtocarrythechargerandneverpullthechargebyitscordwhenunplugging.Replacedamaged
cords immediately.
Makesurecordislocatedsothatitwillnotbesteppedon,trippedover,comeincontactwithsharpedgesor•
otherwisesubjectedtodamageorstress.
DO NOT• operatechargerwithadamagedcordorplug,whichcouldcauseshortingandelectricshock.Ifdamaged,
havethechargerreplacedbyanauthorizeddealer.
DO NOT• operatechargerifithasreceivedasharpblow,beendropped,orotherwisedamagedinanyway.
DO NOT• disassemblecharger.Takeittoanauthorizeddealerwhenserviceorrepairisrequired.
Unplugchargerfromoutletbeforeattemptinganymaintenanceorcleaningtoreducetheriskofelectricshock.•
Disconnectchargerfromthepowersupplywhennotinuse.Thiswillreducetheriskofelectricshockordamageto•
thechargerifmetalitemsshouldfallintotheopening,italsowillhelppreventdamagetothechargerduringapower
surge.
DO NOT• chargebatteriesintemperaturebelow5oCorabove50oC.Thisisimportantandwillpreventserious
damage to the batteries.
Battery Life
ENSURE THAT THE BATTERY IS REGULARLY CHARGED AND IS NOT PERMITTED TO COMPLETELY•
DISCHARGE WHICH MAY PREVENT IT FROM BEING RECHARGED!
DuringusetheLEDswillindicatethechargestatusofthebattery.OncetheREDledlights,itstimetore-charge•
the battery. DO NOT CONTINUE TO USE THE TOOL AS COMPLETELY DISCHARGING THE BATTERY COULD
DAMAGE IT.
Avoidleavingonchargeforextendedperiodsoftime.Althoughoverchargingisnotasafetyconcern,itcan•
signicantlyreduceoverallbatterylife.
The battery will reach optimum performance after being recharged 5 times during normal usage. There is no need to•
run the batteries down completely before recharging.
Avoid short periods of charging.•
-6-
MAINTENANCE
WARNING: Alwayswearsafetygogglesorsafetyglasseswithsideshieldswhenusingcompressedairtocleantools,if
theoperationisdusty,alsowearaduskmask.
Useonlymildsoapanddampclothtocleanthetool.Neverletanyliquidgetinsidethetool.Neverimmerseanypartof
thetoolintoaliquid.
WARNING: DO NOTatanytimeletbrakeuids;gasoline,petroleum-basedproducts,penetratingoils,etc.comein
contactwithplasticparts.Chemicalscandamage,weakenordestroyplasticwhichmayresultinseriouspersonalinjury.
Only the parts shown on the parts list are intended to be repaired or replaced by the customer.
Beforeanyworkonthemachineitself,ensurethatthebatterypackisremovedfromthedrill.
BATTERY DISPOSAL
Whenthebatterynolongeracceptsanadequatechargethebatteryisdepleted.Thebatteryshoulddisposedofinthe•
correct manor.
Thebatterycontainsnickel-cadmium.Youmustnotdisposeofthebatteryintheordinarytrash.•
Consult your local waste authority for information regarding available recycling and/or disposal options.•
TROUBLE SHOOTING
Battery does not charge: 1.TheREDLEDdoesnotindicatethatthere
is power from the transformer.
2.Nopoweratmainssocket.
Checkoutputfromthe1.
transformer.
Checkmainsfusebox.2.
HPC-0023-Issue1-05-12-12
This product is guaranteed for domestic use only for a period of 12 months against faulty manufacture or materials.
Any other use may invalidate the guarantee. This product is not guaranteed for HIRE purposes.
This guarantee does not affect the statutory rights of the consumer.
Ifthereissomethingaboutourproductthatyoudon’tunderstandandyouliveintheUK,
youcancontactourhelplineduringofcehours,9am–4pm,Monday,Wednesday&Friday.
Calls are charged at standard rates.
Outsideofofcehoursorduringpeaktimesyouwillbedirectedtoananswerphone.
Pleaseleaveyourname,abriefdescriptionofyourenquiryandyourphonenumber.
Oneofouroperatorswillcontactyoubackassoonaspossible
Helpline Telephone Number 02083 916 767
AlternativelychecktheQ&Aonourwebsitewww.hilka.co.uk/faq.php
NOTE:
These important safeguards and instructions cannot cover all possible conditions and situations
thatmayoccur.Itmustbeunderstoodthatcommonsenseandcautionarefactors,whichcannot
be built into any product. These factors must be supplied by the person using this product.
Manufactured for Hilka Pro Imports
1RoebuckPlace,110RoebuckRoad,Chessington,Surrey,KT91EU
Wasteelectricalproductsshouldnotbedisposedofwithhouseholdwaste.Pleaserecyclewherefacilitiesexist.
Checkwithyourlocalauthorityorretailerforrecyclingadvice.
Thissymbolisknownasthe‘Crossed-outWheelieBinSymbol’.Whenaproductismarkedwiththissymbol,itmeans
the product should not be disposed of with your general household waste. Only discard electrical/electronic products
in a separate collection scheme which caters for the recovery and recycling of the materials contained within. You co-
operation is vital to ensure the success of these schemes and for the protection of the environment.
Table of contents
Other PROCRAFT Power Screwdriver manuals
