SS-956 SS-968 LCD REWORK SOLDERING
STATION
Thank you for purchasing Pro’sKit product. The SS-956 SS-968 LCD
Smart Hot Air Rework Station has been designed to meet high quality
standards .Please properly use and take care of your product for
prolonging service life. Please store the manual in a safe, easily accessible
place for future reference.
Packing List and Name of Parts
Name of Parts:
Packing List:
1. Smart Rework Station with
Holder
2. User’s Manual
3. Hot Air Gun
4. Air Nozzle x 3
5. Power Cord
6. Vacuum Suction Pen (SS-956)
7. Suction Cup :
Φ12.5mm,Φ10mm ,Φ6.5mm,
Φ3mm (SS-956)
8. IC Popper : 15mm ,20mm
(SS-956)
Features and Specifications
Features:
Microprocessor-controlled with closed circuit sensor design provides
better performance and accurate temperature control.
Temperature calibration function.
Handle with sensor design switches work & sleep mode for real-time
operation convenience.
Provide 600W high power and wide temperature range up to 480°C.
Auto cool-off process to prolong the lifetime of heating element
ESD safe design prevents static and electric leakage to damage the
PCB.
Complies with CE and ESD standard, conforms to RoHS.
High quality air pump supply and quiet operation.
Silicone handpiece cord wire heat-resistant up to 200℃.
Additional ground contact and power cord socket.
Interchangeable and applicable to most of branded hot air nozzles.
Specifications:
Room Temperature~480°C(896°F)
0~699℃(0~999℉) , Adjustable
LCD (60mm X 35mm,Backlight)
Heating Element Model No.
9SS-900-A1 (ID:Ø 2.2mm) x 1pce
9SS-900-A2 (ID:Ø 6.6mm) x 1pce
9SS-900-A3 (ID:Ø 8.5mm) x 1pce
Suction Cup: Φ12.5mm/Φ10mm/Φ6.5mm/Φ3mm x 1pce
（SS-956）
Opening Lever(Width) : 15mm／20mm x 1pce（SS-956）
Main Menu( Fig.1)
Fig.1
How to Use
1. Please remove the pump securing screw(M5x12 with red mark) from
the bottom of the rework station. Failure to do so may result in serious
problems (Fig.2)
Fig.2
2. Insert the power plug into socket.
3. Power on the rework station, and LCD screen will display standby
status after two seconds (Fig.3). When lift the hot air gun, LCD screen will
display the last setting temperature..
Fig.3
4. Do not unplug the power plug instantly after turning off the power
switch, because the fan will keep operating to cool down the heating
element. The power plug only can be unplugged while the fan stops
operation completely.
Temperature and Air Speed Setting (Hot air gun can not
be placed on the holder while setting)
1. Power on the rework station, lift the hot air gun, LCD screen will
display main menu (Fig. 4), last setting temperature will display.
2. Press the “SET” button for one second; then choose temperature
setting mode or air speed setting mode.
3. In temperature setting mode, the ”Set Temp”words will shinning,
adjust the temperature by using the UP▲and DOWN▼buttons. In
another way, you can also press the UP▲and DOWN▼buttons directly
in the main menu to set the temperature.
4. In the air speed setting mode, the ”Air Speed ”words will
shinning, adjust the air speed by using the UP▲and DOWN▼
buttons(air speed range from 20~100). After stopping operation around
two seconds, it will go back to the main menu.
Fig.4
Temperature Calibration Setting
The hot air gun should be recalibrated after changing the gun, replacing
the heating element or nozzle.
1. Press “SET” button and Down button
“▼” in the same time, and main menu will
display ”CAL” and setting temperature. Press
UP ▲or DOWN ▼to input actual
temperature, press “SET”button to
confirm and back to the main menu.
2. When the status display under
temperature is "---", it means temperature has
not been calibrated.
Remove the
screw before use
Down button
(to decrease temp. or air
speed.)
UP button
(to increase temp.
or air speed.)
