Pro-Ject Audio Systems ESSENTIAL III Troubleshooting guide

INSTRUCTIONS FOR USE

Pro-Ject Essential III Flexi-Range

Dear Music Lover,

Congratulations and thank you for choosing Pro-Ject Audio Syste s record player.

Your Essential III turntable has been handcrafted and rigorously tested by skilled technicians to give

you years of enjoyable, trouble free service.

Please contact your dealer if you require additional assistance.

Important:

Your turntable was shipped partially disasse bled in order to avoid da age to sensitive parts.

Please check i ediately to ake sure that neither the packaging nor the device was da aged in

transit. If you are issing parts or if the unit is da aged, please do not operate and contact your

dealer.

Contents

Product illustrations 4

General setup

1. Platter and drive belt installation 5

2. Cartridge installation, stylus exchange 5

3. Vertical Tracking Force setting (VTF) 5-6

4. Anti-skating force adjust ent 6

5. Azi uth setting 6

6. Turntable types and their functions 7

a) ESSENTIAL III 7

b) ESSENTIAL III BLUETOOTH 8

c) ESSENTIAL III PHONO 9

d) ESSENTIAL III SB 10

e) ESSENTIAL III IGITAL 11-12

f) ESSENTIAL III RECOR MASTER 12-13

Technical para eters 14

Troubleshooting, warranty, service 15

Exploded view of the packaging 16

Please do your part to help protect the environ ent:

Disposal of packaging aterial:

Pro-Ject packaging is carefully designed to protect your co ponent fro da age in transit

and you

are strongly urged to keep the original packaging in order to safely ship or

otherwise transport your

turntable in the future.

However, the packaging aterials were chosen to be environ entally friendly, so if

you ust discard

the packaging, please recycle.

ESSENTIAL III FLEXI-RANGE

GENERAL INFORMATIONS

Controls, features and connections

1 PLATTER & FELT MAT

2 DRIVE PULLEY

3 DRIVE BELT

4 TONEARM COUNTERWEIGHT (4a) DOWNFORCE SCALE

5 TONEARM LIFT LEVER

6 TONEARM REST (66) REMOVABLE TRANSPORT LOCK

7 TONEARM TUBE

8 HEADSHELL WITH FINGER LIFT AND PRE-MOUNTED ORTOFON OM10

9 ANTI-SKATING WEIGHT WITH WIRE

10 ANTI-SKATING WEIGHT SUPPORT HOOP

11 ANTI-SKATING STUB WITH ADJUSTMENT SCALE

12 LID

13 LID HINGES

14 HINGE FASTENERS

15 POWER SUPPLY SOCKET

Accessories

1 ANTI-SKATING WEIGHT

2 HOOK TOOL FOR SPEED CHANGE

3 SINGLE ADAPTOR

4 ALLEN KEY 1,5

5 COUNTERWEIGHT no. 00

6 TWO-POINT CARTRIDGE ALIGNMENT PROTRACTOR

7 UNIVERSAL POWER SUPPLY

8 CONNECTION CABLE (CONNECT IT E RCA)

9 INSTRUCTION FOR USE

SETUP

1. Platter and drive belt installation

Please re ove brown paper insert which holds the platter in transport position. Put the felt at on the

top of the platter. Install the drive belt as shown in the following illustration.

2. Cartridge installation, stylus exchange

* If you purchased this turntable in a package that included the cartridge, this has already been done

for you.

Install the cartridge into the alu iniu headshell, using the appropriate hardware included with your

cartridge. All cartridges with half inch ounting holes can be fitted.

Connect the cartridge as indicated below:

•White left channel L+

•Red right channel R+

•Green right channel R-

•Blue left channel L-

For correct cartridge align ent, use the two-point cartridge align ent protractor provided with your

Essential III accessories. If unfa iliar with two-point setup, please refer to your dealer.

A da aged or worn stylus ay har your record collection and should be replaced.

Please re ove stylus protection before pulling the stylus fro the cartridge and replace for a new one.

Stylus type is exchange for pre- ounted cartridge Ortofon OM 10: Stylus OM 10. If in doubt, consult your

local dealer or distributor.

3. Vertical Tracking Force setting (VTF)

Before setting the Vertical Tracking Force, confir the exact weight of your cartridge. The

counterweight supplied (no. 00) is suitable for cartridges fro 3,5 to 5,5g. An alternative

counterweight (no. 01) for cartridges between 6 – 9g is available on request.

Pushing carefully, turn the counterweight onto the rear end of the tonear tube. With the tonear lift

in lower position, carefully rotate the counterweight until the tonear tube balances out. Once the

tonear is correctly balanced, return it to the rest. Hold the counterweight without oving it, and gently

revolve the downforce scale ring until the zero is in line with the anti-skating stub.

Rotate the counterweight counter clockwise (seen fro the front) to adjust the downforce according to the

cartridge anufacturer's reco endations. One ark on the scale represents 1 N (= 0,1g / 0,1 Pond)

of downforce.

Please note: Adjust the VTF prior to installing the anti-skating weight.

4. Anti-skating force adjustment

Hang the loop of the thread of the anti-skating weight in the groove of the anti-skating stub

corresponding to the downforce applied to your cartridge and feed the thread through the loop of the

wire support.

The anti-skating force ust be adjusted corresponding to the downforce as follows:

VTF Groove in the stub

10 - 14 N 1

fro bearing rings

15 - 19 N 2

" " "

20 N and bigger

" " "

5. Azimuth setting

The cartridge needle ust be perpendicular to the record in order to trace the groove wall

odulations correctly.

The azi uth (angle) is precisely set by the factory. In the event that you need to odify this setting,

however, follow the instructions below.

Loosen the s all azi uth screw, again using the 1.5 allen key.

DO NOT REMOVE THE AZIMUTH SET SCREW COMPLETELY!

Loosen the screw just enough to be able to gently rotate the ar tube and set the azi uth to the

correct position. The correct position can be checked fro the front view, preferably with the needle

placed on a irror placed on the platter. Once the azi uth setting is correct, gently re-tighten the

azi uth setting screw.

ESSENTIAL III SPECIFIC INFORMATIONS

Controls, features and connections

1 ON/OFF SWITCH

2 STEPPED DRIVE PULLEY

3 OUTPUT CABLE CONNECT IT E

_____________________________________________________________________________________________________________

Switc ing on and off

Pressing the ON/OFF switch alternately starts or stops the otor.

C anging replay speed

To play 45 r.p. ., put the drive belt over the larger dia eter part of the otor pulley. To revert to 33

r.p. . repeat the proceedings using the s aller step on the pulley.

Connection to t e amplifier

The record player has a captive tonear signal lead for connection to the a plifier. Use the Phono input on

your a plifier. Make sure that the phono input offers correct atching and a plification for the type of

cartridge used. Line inputs (such as CD, Tuner, Tape or Video) are not suitable.

Take care to connect the left and right channels correctly. The right channel is usually arked red, the

left channel black or white. Check the anual supplied with your a plifier for relevant infor ation.

The earthing wire of the tonear lead should be connected to the earth ter inal on your a plifier (if

provided).

If your a plifier does not have an input suitable for phono cartridges you will require a separate

phono a plifier stage for MM or MC cartridges which is then connected between the record player and

a free line level input of the a plifier.

ESSENTIAL III Bluetooth SPECIFIC INFORMATIONS

Controls, features and connections

1 ON/OFF SWITCH

2 STEPPED DRIVE PULLEY

3 PHONO/LINE OUTPUT, EARTH CONNECTION

4 BLUETOOTH SWITCH

_____________________________________________________________________________________________________________

Switc ing on and off

Pressing the ON/OFF switch alternately starts or stops the otor.

C anging replay speed

To play 45 r.p. ., put the drive belt over the larger dia eter part of the otor pulley. To revert to 33

r.p. . repeat the proceedings using the s aller step on the pulley.

Connection to t e amplifier

The record player has two possible outputs – Line OUT with integrated prea plifier and Phono OUT for

connection to the prea plifier. If you choose Phono OUT, than use the Phono input (so eti es

labelled gra , disc or RIAA) on your a plifier. Make sure that the phono input offers correct atching

and a plification for the type of cartridge used. If you choose Line OUT, than use the Line inputs (like

CD, Tuner, Tape or Video).

Take care about connecting the left and right channel correctly. The right channel is usually arked

red, the left channel black or white. Check the anual of your a plifier for relevant infor ation. An

earthing wire ay be connected to the screw ter inal between the sockets if you encounter hu ing

proble s.

Bluetoot pairing

The record player has Bluetooth output and trans it signal auto atically when is connected to ains.

It is paired auto atically with any device with Bluetooth receiver (such as Pro-Ject MaiA, MaiA DS,

Bluetooth Box s and Bluetooth Box E).

For pairing with other devices and portable speakers use the anual of the given product.

For restart of the Bluetooth trans itter, please turn OFF and ON the Bluetooth odule by using the

switch. Restart is needed only when there is a change of the Bluetooth receiver.

ESSENTIAL III Phono SPECIFIC INFORMATIONS

Controls, features and connections

1 ON/OFF SWITCH

2 STEPPED DRIVE PULLEY

3 PHONO/LINE OUTPUT, EARTH CONNECTION

4 PHONO/LINE OUTPUT SWITCH

_____________________________________________________________________________________________________________

Switc ing on and off

Pressing the ON/OFF switch alternately starts or stops the otor.

C anging replay speed

To play 45 r.p. ., put the drive belt over the larger dia eter part of the otor pulley. To revert to 33

r.p. . repeat the proceedings using the s aller step on the pulley.

Connection to t e amplifier

The record player has gold plated fe ale RCA phono sockets and possibility to choose between Phono and

LINE output. With LINE OUT on, you can use a line input (such as AUX, CD, Tuner, Tape or Video) on your

a plifier. With PHONO OUT on, you can use your own phono pre-a plifier (so eti es labelled gra , disc

or RIAA).

Take care to connect the left and right channels correctly. The right channel is usually arked red, the

left channel black or white. The earthing wire of the tonear lead should be connected to the earth

ter inal on your a plifier (if provided).

ESSENTIAL III SB SPECIFIC INFORMATIONS

Controls, features and connections

1 SPEED CONTROL

2 DRIVE PULLEY

3 PHONO OUTPUT, EARTH CONNECTION

___________________________________________________________________________________________________________

Switc ing on and off, c anging replay speed

To play records at 33 r.p. . press the speed control switch to starts the otor. Pressing the ON/OFF

switch two ti es selects 45 r.p. .. The selected speed is shown respectively by the flashing LED. When

the platter has attained full speed, the LEDs stop flashing.

A long ( ore than three seconds) press on the ON/OFF switch stops the otor.

Connection to t e amplifier

Connect the tonear cable provided with the accessories to the RCA tonear output that is located at

the rear of the turntable, behind the tonear . Connect the grounding cable on the earth connection

screw.

If your a plifier does not have an input suitable for phono cartridges you will require a separate

phono a plifier stage for MM or MC cartridges which is then connected between the record player and

a free line level input of the a plifier.

Other manuals for ESSENTIAL III

This manual suits for next models

Table of contents

Other Pro-Ject Audio Systems Turntable manuals

Pro-Ject Audio Systems

Pro-Ject Audio Systems X2 User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 5 SuperPack User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Elemental User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC Esprit SB User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Speed Box MK II User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject DEBUT III PHONO SB User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut III User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 5 SuperPack User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon RecordMaster HiRes User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Jukebox E User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtension User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon DC User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Align it User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 1.3 Genie User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 10.1 Evolution User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 3 Carbon User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression Carbon Classic User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems VTA it User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon RecordMaster HiRes User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential II DIGITAL User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Xtension User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression Classic User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems X8 User manual

Popular Turntable manuals by other brands

Gemini

Gemini CDT-05 MKII product manual

Rotel

Rotel RP-820 owner's manual

Shuman

Shuman MC-250BT user manual

Stanton

Stanton STR8-150 owner's manual

Audio Technica

Audio Technica AT-LPW40WN user manual

Crosley

Crosley McQueen CR7011-GY instruction manual

Reloop

Reloop SMP-1 Operation manual

auna

auna TT-Classic Plus instruction manual

COMO AUDIO

COMO AUDIO Turntable Analog user manual

Dual

Dual 1009 F owner's manual

REED

REED Muse3C user manual

AXIOMTEK

AXIOMTEK OPS883-H Series Quick installation guide

Pioneer

Pioneer PL-71 operating instructions

Vestax

Vestax PDX-a1 owner's manual

Denon

Denon DP-400 owner's manual

Dual

Dual 504 Service manual

Audio-Techica

Audio-Techica AT-LP60XBT user manual

Goldring

Goldring G99 instruction manual