PRISM+ XQ340 PRO User manual
XQ340 PRO
User Manual
3
Table of Contents
Section 1: Safety Precautions..................................................... 4
Section 2: Box Contents .............................................................. 5
Section 3: Product Overview....................................................... 6
3.1 – Monitor Buttons ............................................................... 6
3.2 – Monitor Ports................................................................... 6
Section 4: Stand Installation ....................................................... 7
Section 5: Mount Installation ...................................................... 9
Section 6: Connectivity Options................................................. 10
6.1 – Connecting Your Earphones............................................ 10
6.2 – DP Connectivity .............................................................. 10
6.3 – Connecting the Power Cable .......................................... 11
6.4 – HDMI Connectivity .......................................................... 11
Section 7: Basic Operation.......................................................... 12
Section 8: Indicator Light ............................................................ 12
Section 9: On-Screen Display (OSD) .......................................... 13
9.1 – OSD Menu Functions ...................................................... 14
Section 10: 16
Section 11: Specifications ........................................................... 17
ECO Modes and Gameplus Switching....................
4
Section 1: Safety Precautions
Read and observe the following warnings and information below.
1. Please disconnect the power plug before cleaning the product. It is recommended to
wipe the monitor with a clean, soft and dry cloth. If using a damp cloth, kindly ensure
that your monitor is dry before connecting the power plug.
2. Do not use alcohol or ammonia-based cleaning agent toclean your monitor.
3. The ventilation openings are at the back of the monitor. Avoid blocking these
openings to prevent the monitor from overheating.
4. Avoid placing the monitor near any heat sources such as portable heaters, heating vents,
or any device that produce heat as it may cause a fire.
5. Do not spray cleaner or any kind of liquid directly onto the monitor’s screen or
any part of the monitor.
6. Do not insert any objects into the monitor, especially via the ventilation openings.
7. Always make sure your monitor is placed on a stable, secure and, leveled surface
to prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of non-use.
9. Do not place heavy items on the monitor or monitor cables.
10.
Do not attempt to disassemble or remove parts from the monitor. Any disassembly
or modification not performed by an authorized technician can damage the monitor
and possible exposure to high voltage electricity, which may lead to severe injury
or death.
5
Section 2: Box Contents
DP Cable x 1
Stand Stem x 1
Screws*11mm x 3
(for stand installation)
Spacer Screws*35mm x 4
(for wall mounting)
XQ340 PRO
User Manual
6
Section 3: Product Overview
3.1 – Monitor Buttons
8 Audio Output: Insert one end of the audio cable into an external audio
source, e.g., speakers or headphones, to pass audio signals through the
monitor.
9 DP Connector: Insert one end of the DP cable into the computer’s DP output
and connect the other end to the monitor’s DP port.
10 HDMI Connectors: Insert one end of the HDMI cable into the computer’s
HDMI output and connect the other end to the monitor’s HDMI port.
7Power Connector: Insert the power cable to supply power to the monitor.
7 8
1 M Menu Button: Press to display the OSD menu or enter sub-menus.
2 Down Button: Press to navigate down in the menus.
3 Up Button: Press to navigate up in the menus.
4 E Exit Button:Press to exit.
5 Power Button: Press to turn on/off the monitor.
6 LED Indicator: Changes colors to indicate status. Refer to Section 8.
3.2 – Monitor Ports
9 10
7
Section 4: Stand Installation
Open the package and take out the product. With the foam still attached, gently
place it on a desktop or table.
Remove the upper foam and place the monitor on top of the foam.
As per picture shown below, push the click button and take out the shaft assembly.
upper foam
lower foam
lower foam
lower foam
shaft assembly
8
Take out shaft assembly part and stand stem. Use 2 pcs of 11mm screws to
fasten them. As shown in the picture below, use 1pc of 11mm screw
to fasten the stand stem and stand base.
Based on the picture below, place the well assembled stand to the corresponding
slot at the back cover and ensure the shaft assembly is well attached to the monitor.
Gently lift the monitor up and ensure that the monitor is well attached.
To dismantle, operate by reversing the installation steps.
Gently lift your monitor to an upright position.
Note: Do removed the foam attached to the monitor panel when lifting the
monitor. Do not lift the monitor by holding on the screen to prevent breaking
the panel.
9
Section 5: Mount Installation
Take out the monitor from the box and gently place it on the foam on a stable,
flat table. Remove the shaft assembly.
Take out the four hexagonal spacer screws with a height of 35mm from the
accessory bag, and fasten them into the M4 threaded hole of the rear tank sinking
slot with a screwdriver (not included). It is advised to place the monitor on top of the
foam to prevent breaking the screen.
Install the monitor on the wall mount or bracket as desired.
VESA and mounting accessories are not included.
10
Section 6: Connectivity Options
6.1 – Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor. If you have an audio
device connected to your computer when you connect your earphones to the monitor,
the audio devices will not produce sound. Earphones and other audio devices are not
included.
Earphones (not included)
DP
DP OUTPUT
DP Cable (Included)
Exposure to loud audio for prolonged periods of time may permanently
damage your hearing.
6.2 – DP Connectivity
For the monitor to receive DP signals from the computer, use the DP cable to
connect the monitor tothe computer
Table of contents
Other PRISM+ Monitor manuals
