Prismatibro Prisma Light Elliot User manual
CONTROL SYSTEMS
MANUAL
2Prisma Light | prismatibro.se
CONTENT
Introduction
Prisma Light Constant......................................................................................................................................................................3
Prisma Light DALI.............................................................................................................................................................................................3
Prisma Light Remote............................................................................................................................................................................4
Prisma Light Detect...................................................................................................................................................................................4
Prisma Light Nema.......................................................................................................................................................................................5
Prisma Light SR..........................................................................................................................................................................................................5
Remote control.......................................................................................................................................................................................................6-7
Detect, Android-app..................................................................................................................................................................8-23
Troubleshooting......................................................................................................................................................Back cover
Warranty..................................................................................................................................................................................................Back cover
Support, contact information............................................................................Back cover
3
prismatibro.se | Prisma Light
INTRODUCTION
Prisma Light Constant
The simplest models
They light up when the power is turned ON at the given power
output that was installed in the factory.
If you want to make any changes to the power output you
will have to send the luminaire back to PrismaTibro.
Prisma Light DALI
With a DALI-driver it is possible to change the power output and
night reduction after the luminaire has been installed.
The adjustments can be made in dierent ways:
Alternative 1 You go all the way up to the luminaire that is mounted
on the pole and you make the adjustments close to the driver.
Alternative 2 You buy the luminaire with a 5-wired cable, then you
can make the adjusments down at the
access point in the pole.
4Prisma Light | prismatibro.se
Prisma Support
Prisma Daps
2000•L
Prisma Daps
2000•M
INTRODUCTION
Prisma Light Remote
Control every individual luminaire with a Remote
Change power output The power output for a Prisma Light Remote
can be adjusted in steps of 1 W.
Prisma Moonlight More than a night reduction: Lower or raise the
power output during one optional time.
Control every luminaire Every luminaire can be controlled individualy.
Remote Settings can be made with a remote - see next spread.
Security 5-digit PIN-code, specially constructed remote.
Factory settings When ordering we ask every customer which settings
should be set in the factory. These settings can later be
changed with the remote.
Communication
• Between luminaries
• Between luminaries and those who need light
• Between luminaries and you
Accessories
• Gateway
• Dongle
• Android-app
Prisma Light Detect
Our most powerful system: Detect, light when it is needed.
5
prismatibro.se | Prisma Light
INTRODUCTION
Prisma Light Nema
Prepared and ready
DALI-driver on the inside and a NEMA-socket on the outside.
Remove the dust cap and connect your external node.
Prisma Light SR
Prepared and ready
The luminaire have a built in SR-driver using the Zhaga-standard.
On the outside a SR-socket is mounted – easy to connect the
external node when you have choosen how to
control your installation.
Remove the dust cap and connect your external node.
6Prisma Light | prismatibro.se
REMOTE
ESTABLISH CONNECTION Point the remote upwards
towards the center of the luminiare. Press
The luminiare responds with a blink.
UNLOCK + PIN-code, 5 digits.
Response: Blink, blink
ON/OFF Response: Light up or turns o.
The setting can´t be saved.
PRISMA + Time, 2 digits (e.g. 23) +
MOONLIGHT Response: Blink, blink
START* The setting is saved.
PRISMA + Hours, 2 digits (e.g. 06) +
MOONLIGHT Respons: Blink, blink
STOPP* The setting is saved.
DIMMING LEVEL + Power, 2 digits (e.g. 05) +
Reponse: Blink, blink
The setting is saved.
POWER + Power, 2 digits (e.g. 20) +
Response: Blink, blink
The setting is saved.
DAY 1
Prisma Light programs it’s self
through statistics starting from
day one. No Prisma Moonlight
on the rst night.
FOLLOWING DAYS
Prisma Light remembers the previous
days. Prisma Moonlight according to
the settings above.
* Hours
The time specied for the START and
STOP is approximate and is subject to
the night’s darkest moment regardless
of summer and winter.
The darkest moment is at midnight
during the period of winter time, e.g
START 23, STOPP 04.
Prisma Light Remote
Made in Tibro · Version 1805
1
WATT
3
2
START LEVEL
STOP
DIM
CITY DETECT
RETURN
4 65
7 98
0
On O
OK
UNLOCK
Unlock the luminaire to be able
to change the settings.
Requires PIN code that can be
obtained through
support@prismatibro.se
ON/OFF
Switch on or o the luminaire.
NIVÅ (Level)
The power during Prisma Moon-
light.
STOPP (Stop)
Hours until Prisma Moonlight is
stopped.
START
The time when Prisma Moonlight
starts.
WATT (Power)
The ordinary power.
8Prisma Light | prismatibro.se
ANDROID-APP
Installation
Download the app from Google Play
Name: ”Prisma Conguration”
Internt-access needed.
Login
The password is personal.
Call Prisma Tibro +46 504-400 40
Following details are necessary to
create a login:
• First name, Last name
• Phone number
• E-mail
• Company name
• End customer
• Project
Start dongle
Press the button, release when it
turns white. It will then go from red
to green to white to blue. When it
turns blue it is ready to use.
9
prismatibro.se | Prisma Light
ANDROID-APP ANDROID-APP
Select dongle
If there are several IDs to choose
from it depends on the fact that
there are other dongles closeby.
Look at the last four numbers on
the backside of the dongle to
identify yours.
In this example: BA:52
Select project
You can have access to several
projects.
Choose the project in the list
that you want to look at this
time.
In this example:
Showroom
10 Prisma Light | prismatibro.se
ANDROID-APP
Create site
1.
”Name the site” is the rst thing you
need to do. Type the name, probably
the village name or the name of the
area.
In this case we choose to call it
”Gata 4”
NOTE!
The installation need to have
power on.
2.
Add luminaries to the site:
Press on the ”lock”.
3.
When it is unlocked a
will be shown.
Press to add luminaire.
This manual suits for next models
3
Table of contents
Other Prismatibro Lantern manuals
