Primus EtaPower MF Installation instructions
Part No. 352085
IMPORTANT
Read instructions before operation.
PRIMUS
EtaPower MF Stove
User Manual and
Product Specications
®
Instructions for use
IMPORTANT: Read these instructions carefully
before connecting the appliance to the LP
Gas cartridge or fuel bottle, and then study
the instructions for use regularly in order
to remember the way the appliance works.
Keep these instructions for future use. Failure
to follow these instructions can result in
serious personal injury and death!
WARNING: This appliance consumes oxygen
and produces carbon dioxide. To avoid
extreme danger, do NOT ignite this appliance
in unventilated space, indoors, in a tent, in a
vehicle or other enclosed space.
USE OUTDOORS ONLY!
NEVER cover the stove, LP Gas cartridge or
fuel bottle with windscreen, stones or similar,
that can cause overheating and damage to the
stove, LP Gas cartridge or to the fuel bottle.
Overheating the LP Gas cartridge or the fuel
bottle in this way is extremely dangerous. Use
the windscreen that accompanies the stove.
Fuel and performance
Jet 32 - LP Gas
• Primus cartridge LP Gas (propane/butane
mix) is the ideal fuel for the EtaPower MF
stove. The fuel is very easy to use, normally
requires no priming, and is efcient,
environmentally friendly and clean (no soot).
Minimum maintenance and cleaning are
required.
Jet 28 - Petrol/Gasoline
• Good quality industrial petroVgasoline, such
as PRIMUS PowerFuel, MSR® White Gas and
Coleman® Fuel give clean burning and leave
almost no deposits in the fuel system.
• Unleaded petroVgasoline is extremely
volatile and contains additives that leave more
deposits in the fuel system.
• Do NOT use leaded petrol/gasoline, because
of the health risks involved.
Jet 22 - Parafn/Kerosene
• Parafn/kerosene can be obtained
throughout the world, but burns with a smoky
ame, it is also more difcult to preheat and
requires regular cleaning.
1. Introduction
1.1 This appliance is intended for PRIMUS
PowerGas (Propane/isobutane/Butane mix)
2202, 2206 and 2207 or PRIMUS PowerFuel
or other high-grade industrial petrol/gasoline,
unleaded petroVgasoline and parafn/
kerosene.
1.2 Use Primus LP Gas cartridges/fuel
bottles, Any attempt to t another type of LP
Gas cartridges or liquid fuel bottle may be
dangerous. This may result in leakage, leading
to injury or death.
1.3 Gas consumption 116 g/h / 5700 BTU/h /
approx. 1.61 kW at 1 bar gas pressure.
1.4 Size of jet: 0.32 mm, (733950) for LP Gas.
Jet size: 0.28 mm, (734330) for industrial
petrol/ gasoline such as PRIMUS PowerFuel,
MSR® White Gas, Coleman® Fuel and
unleaded petrol/gasoline. Jet size: 0.22 mm,
(734320) for parafn/kerosene or similar fuel.
1.5 The appliance fulls requirements
in accordance with EN 521 and ANSI
Z21.72b-2002/CSA11.2b-2002. The CE
approval (EN 521) regards only LP Gas.
1.6 Ensure at all times that the hose
between the cartridge and stove is straight,
and cannot come In contact with the ame
or hot gases. Avoid subjecting the hose to
wear. Make sure that the HOSE DOES NOT
GET TWISTED.
2. Advice for safe use
2.1 Ensure that the appliance and pump seals
(1) are in place and in good condition before
tting the LP Gas cartridge or liquid fuel bottle.
2.2 This appliance is intended for use
outdoors only. To avoid extreme danger,
do NOT use this appliance in unventilated
space, indoors, in a tent, in a vehicle or other
enclosed space.
2.3 Make sure that no inammable object are
in the vicinity, as explained under item 4.16
2.4 Always t or replace the LP Gas cartridge/
liquid fuel bottle in a safe place. This should
be done outside only, away from possible
sources of ignition, such as naked ames,
pilot lights and electric res, and well away
from other people.
2.5 If there is leakage from the appliance
(smell of LP Gas, petroVgasoline, etc.), it
should immediately be put in a well ventilated
place outdoors, not in the vicinity of a source
of ignition, where the leak can be investigated
and stopped. Checking for leaks may only be
carried out outdoors. Checking for leaks must
never be made with a naked ame. Use soapy
water or similar.
2.6 Never use an appliance with damaged or
worn seals, nor a leaking, damaged or badly
working appliance.
2.7 Never leave a lit appliance out of sight.
2.8 Make sure that saucepans do not boil dry.
3. Handling the appliance
3.1 Do not touch the heated parts of the
appliance during use or directly after use.
3.2 Storage: Always unscrew the fuel bottle
from the appliance when it is not being used.
Store the container in a dry, safe place, where
there are no sources of heat. Avoid solar
radiation.
3.3 Do not misuse the appliance or use it
for other purposes than that for which it is
intended.
3.4 Handle the appliance carefully. Do not
drop it.
4.12 Ensure that the hose is fully pulled out
towards the LP Gas cartridge. Keep the LP
Gas cartridge away from heat that radiates
from the stove when in use.
4.13 Turn the valve knob (2) anticlockwise, and
light the stove. The ame can be ne-tuned by
turning the valve knob (2).
4.14 When the stove is burning it should be
kept as level as possible and must not be
moved around. Moving the stove while in use
can cause it to are up.
4.15 Ensure that the stove is turned off
completely after use by turning the valve knob
clockwise as far as it will go. There will be
some delay between turning the valve off and
the burner going out.
4.16 The distance to inammable material in
ceiling and walls must be at least 1250 mm,
OTHERWISE they can catch re.
4. Assembly and use of
the appliance with LP Gas
cartridges
4.1 Make sure that the right jet is used for the
selected fuel.
4.2 Make sure that the valve (2) is closed
(maximum clockwise).
4.3 Keep the LP Gas cartridge (3) upright
when connecting it to the valve.
4.4 Connect the valve to the LP Gas cartridge
carefully. Make sure the screws are not cross-
threaded. Tighten until the O-ring of the valve
meets the LP Gas cartridge. Only tighten by
hand.
4.5 Ensure that the connection is leak-proof.
Check for any leaks outdoors. Use soapy
water or similar. Never use a naked ame
when checking for leaks. If using soapy water,
any leak will show itself as small bubbles at
the point of leakage. If you are unsure, or can
hear or smell gas, never light the appliance.
Unscrew the LP Gas cartridge and contact
your local Primus retailer.
With EtaPower 1.7 and 2.1 L pots (Fig. 2)
4.5 Place the wind screen (5) over the burner
(4) and twist it a quarter turn so that it locks
into place under the base plate holder (6).
Windscreen to be used with EtaPower pot
only!
4.7 Twist the pot supports (7) into place.
4.8 The stove is now ready for use.
With a frying pan or large pots (Fig. 3)
IMPORTANT! When using a frying pan or other
pots than the EtaPower pot, do not use the
windscreen (5)1
4.9 Place the burner (4) on the base and make
sure it is stable.
4.10 Twist the pot supports (7) into place and
make sure they are fully extended.
4.11 The stove is now ready for use.
5. Assembly and use of the
appliance with liquid fuel
5.1 Make sure that the right jet is used for the
selected fuel.
5.2 Fill a Primus fuel bottle up to the level line
with the selected liquid fuel. NB! Never ll
above the level line. Make sure that the valve
knob (2) is tightened so that the valve is dosed
(maximum clockwise).
5.3 Connect the pump to the fuel bottle.
Make sure the screws are not cross-threaded.
Tighten.
5.4 Screw the fuel pump swivel coupling
carefully into the valve until it meets the
control valve O-ring. Be careful not to cross-
thread the connection. Hand- tighten only -
overtIghtening will damage the connection.
5.5 With EtaPower 1.7 and 2.1 L pots (Flg. 2)
5.6 Place the wind screen (5) over the burner
(4) and twist it a quarter turn so that it locks
into place under the base plate holder (6).
Wind screen to be used with Eta-pot only!
5.7 Twist the pot supports (7) into place.
With a frying pan or large pots (Fig. 3)
IMPORTANT! When using a frying pan or
other pots than the EtaPower™ Pot, do not
use the wind screen (5)!
5.8 Place the burner (4) on the base and make
sure it is stable.
5.9 Twist the pot supports (7) into place and
make sure they are fully extended.
5.10 Pump 15-20 times, or pump more than
this if the fuel level is low.
5.11 Place the fuel bottle (laying down) on a
level base with the text “ON “ on the pump
facing upwards.
5.12 The appliance should always be standing
on a level surface with the hose pulled out
towards the fuel bottle. Keep the fuel bottle
away from heat.
5.13 Open the valve on the pump by turning
the knob anticlockwise for a short time. (3-4
seconds depending on which fuel you use.)
Liquid fuel will then ow towards the jet and
enter the burner Just opening it for a short
time will give sufcient fuel to start the stove.
More fuel than this gives a longer preheating
time and larger ames.
5.14 Check that no leaks occur in the
connections. If leaks are discovered, the stove
should not be lit.
5.15 Light the burner (at the pre heating
pad) (8) with a match, lighter or similar. Keep
your head and body away from the stove.
The liquid which has owed out previously
will now burn for about 45 seconds if it
is petroVgasoline, and 90 seconds if it is
parafn/ kerosene. During this so-called
preheating period, the liquid vaporises, and at
the end of this period, a crackling noise can be
heard. Then the pump valve should be opened
slowly by turning the knob anticlockwise. If
the ame is yellow and relatively large, the
pump’s valve should be closed and preheating
allowed to continue for a while longer. If the
ame is small and relatively blue, the stove is
ready for use.
5.16 When the stove is burning, it should be
kept level and not moved around. If the stove
is moved, or is not sufciently hot, it can are
up.
5.17 Ensure that inammable material is kept
at a safe distance. Distance to ceiling should
be at least 1250 mm and to well at least 1250
mm, OTHERWISE it can catch re!
5.18 To close down the appliance and empty
the fuel system. Turn the fuel bottle 180°
so that the “OFF’ text on the fuel pump is
pointing upwards. When the ame has gone
out and only air is going through the jet,
close the valve (by turning the control knob
clockwise as far as it will go). Note: This
procedure will take about 1 minute. Let the
appliance cool down before taking it apart.
5.19 Do NOT relight a hot appliance
6. Maintenance
6.1 When using liquid fuel, the jet must
be cleaned regularly for optimal, problem-
free use. If the appliance is used for a long
period of time, or with inferior fuel, the fuel
connections will need to be cleaned,
6.2 Cleaning the Jet
Close the control knob (2) completely and
unscrew the LP Gas cartridge (3).
6.3 Squeeze the spring-loaded burner holder
(10) and remove the burner.
6.4 Loosen the clamp screw (14) on the
injector tube (12) and remove the preheating
coil (11).
6.5 Unscrew the jet (9) with the multitool or an
8mm open-end wrench.
6.6 Clean the jet using the cleaning wire on the
multitool. 6.7 Mount the jet on the pipe and
make it leak-proof by tightening it carefully. Do
not tighten too hard. Check that it is leak-proof
with soapy water or similar.
6.8 Place the preheating coil in the injector
tube (12), fasten it with the clamp screw (14),
and reattach the burner holder (10).
6.9 Cleaning the fuel connection
A cleaning wire (16) is delivered with the
appliance for this purpose. The wire is stored
in the fuel pipe (11).
6.10 Unscrew the hose from the fuel
connection with the multitool. Pull the
deaning wire out using the multitool. Pull the
wire backwards and forwards until the fuel
connection is clean. Rush the fuel connection
with the jet disassembled, and connect the
fuel pump/bottle to the appliance. Pressurise
the fuel bottle and open the control valve
and ush half a cupful of fuel through the fuel
connection. Warning: This must not be carried
out in the vicinity of a source of ignition such
as open ame, pilot ame or electric heater.
Do not spill fuel. Assemble the hose and screw
it down so that the connection is leak proof.
Do not tighten too much. For extra safety do
this outdoors. Check that there are no leaks
using soapy water or similar. Assemble the
stove in accordance with Item 6.7.
6.11 Fuel pump
If the pump does not pressurise the fuel bottle,
stretch the leather gasket (17) slightly and
oil it with Primus leather oil (saliva or other
mineral-based oil). Unscrew the pump rod and
pull it out. Rub the oil into the leather gasket
until it is soft and pliable. If the pump does not
pressurise the fuel bottle despite this, replace
the leather gasket arid/or check the O-ring on
the back valve (18). Clean if necessary.
7. Checks and maintenance
7.1 Always make sure that seals are correctly
located and in good condition. This should
be checked every time the appliance is
assembled. Replace seals if they are damaged
or worn. New seals can be purchased from
you nearest Primus retailer.
8. Advice and
troubleshooting
8.1 The use of LP Gas in cold weather is
affected by a number of factors which can be
remedied with a number of measures.
Factors that affect the efciency of the stove:
- The mixture of gas in the LP Gas cartridge
(propane/ isobutane/butane)
− The quantity of LP Gas in the cartridge
- The surrounding temperature
- The temperature of the LP Gas cartridge
Measures which improve function during cold
weather
- Warm the LP gas cartridge with your hands
or under clothing
8.2 When liquid fuel is used in connection
with low power (boiling), the fuel bottle should
be used with low pressure by only pumping
the fuel pump once or twice. Important
information is given below regarding the
power of stoves used with fuel bottles and
advice as to how the (maintained) power can
be increased.
Possible reasons and measures if the
appliance burns with an unstable, yellow
ame:
- Insufcient preheating (see item 5).
- The jet is blocked (clean regularly as
described under item 8)
- Preheating for too short a period
- The incorrect jet is mounted on the appliance
(check and replace jet)
- Excess pressure in the fuel bottle
- Increasing from low power to high power too
quickly
- The appliance is not protected against wind.
A collapsible wind screen should always
be used during windy conditions. This is
especially important with winter use.
9. Service and repairs
9.1 If any faults cannot be rectied by
following these instructions, the appliance
should be returned to your nearest Primus
retailer.
9.2 Never try to carry out other maintenance or
repair work than that which is stipulated here.
9.3 Never make alterations to the appliance,
because it can then be dangerous to use.
9.4 The stove has been approved with a
factory- assembled hose, which should NOT
be replaced with any other type of hose than
the genuine hose 732910.
10. Spare parts and
accessories
10.1 Only use Primus genuine spare parts
and accessories. Take care when assembling
spare parts and accessories and avoid
touching hot parts.
10.2 Only use Primus fuel bottles 734120,
721950, 721960 and 732530 or PRIMUS
PowerGas LP Gas cartridges 2202, 2206 and
2207 (Propane/lsobutane/Butane mix) with this
appliance.
10.3 Spare parts
733950 Jet for LP Gas (0.32)
734330 Jet for PRIMUS PowerFuel, Industrial
petroVgasoline (unleaded petrol/asoline) (0.28)
734320 Jet for parafn/kerosene or similar fuel
(0,22)
732910 Hose including valve
732470 Gasket for fuel pump
732440 O-ring hose connection
732940 Multitool
732230 Fuel pump
Extra accessories are service and
maintenance kit 734150 and service kit for fuel
pump 721460.
CUSTOMER SERVICE 1300 555 197
Distributed by
PRIMUS AUSTRALIA PTY LTD
Bundoora Victoria 3083
www.primusaustralia.com.au
For your safety
If you smell gas
1. DO not attempt to light appliance
2. Extinguish any open ame
3. Disconnect from fuel supply
DO not store or use gasoline or other liquids
with ammable vapours in the vicinity or any
other appliance
DANGER: CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide
which has no odour. Using it in an enclosed
space can kill you. Never use this appliance in
an enclosed space such as a camper, tent, car
or home.
WARNING: Keep stove area clear and free
from combustible materials, gasoline and
other ammable vapours and liquids
WARNING: See too that no obstruction of
combustion or ventilation occur.
WARNING: See too that the ame on the
appliance is steady. The ame shall always
leave the stove straiaght upwards. Note. Wind
may press the ame down under the burner, if
that happens stop the stove immediately and
move it to a wind protected area.
WARNING: When the stove is in storage, the
gas canister has to be disconnected.
This manual suits for next models
1
Table of contents
Other Primus Stove manuals
Primus
Primus Techno Trail User manual
Primus
Primus TUPIKE User manual
Primus
Primus 3320 User manual
Primus
Primus 3043 User manual
Primus
Primus Express Stove User manual
Primus
Primus EtaSolo 3550 User manual
Primus
Primus 3284 User manual
Primus
Primus 2219 Installation instructions
Primus
Primus Mimer Stove Duo User manual
Primus
Primus 3511 User manual
Primus
Primus 328984 Installation instructions
Primus
Primus EasyFuel II EF 3277 User manual
Primus
Primus TiLite 324680 User manual
Primus
Primus MOJA User manual
Primus
Primus 3214 MicronTrail User manual
Primus
Primus 2243 User manual
Primus
Primus 3284 User manual
Primus
Primus 3530 User manual
Primus
Primus EtaPackLite 3540 User manual
Primus
Primus 3277 EasyFuel II EF User manual
Popular Stove manuals by other brands
Arada
Arada Cassette Stove installation guide
Parmco
Parmco FS 600 Installation and operating instructions
MCZ
MCZ SUITE AIR 10 M2 installation guide
HearthStone
HearthStone Stowe DV 8321 Owner's manual & installation guide
Cattara
Cattara FAMILY manual
Stanley
Stanley Argon F500 OVAL Installation and operating instructions
Avalon
Avalon B-VENT instructions
Nordpeis
Nordpeis Vega user manual
Exquisit
Exquisit EKC601-5 Instructions for use and installation
Stanley
Stanley Oisin Oil MK II Installation and operation instruction
Thermocet
Thermocet Brookfield S/CC Operating and installation instructions
HASE
HASE delhi operating instructions
Vermont Castings
Vermont Castings Intrepid 2 User instructions
Italiana Camini
Italiana Camini CLASSICA Installation, use and maintenance
Avalon
Avalon Vashon Avanti DVS FS manual
Spartherm
Spartherm ambiente a1 Installation and operating manual
Dimplex
Dimplex MCFSTV12AU manual
Warmlite
Warmlite WL46040 manual