Primes MicroSpotMonitor Plus HighBrilliance User manual

Revision 00 EN - 02/2022

MicroSpotMonitor+ HighBrilliance

MSM+ HB10, MSM+ HB20

LaserDiagnosticsSoftware LDS

35,0(6

Original Instructions

MicroSpotMonitor MSM+ HB10

Revision 00 EN - 02/2022

MSM+ HB

35,0(6

IMPORTANT!

READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE USE.

4Revision 00 EN - 02/2022

MSM+ HB

35,0(6

Table of Contents

1 Basic safety notes 9

2 Symbols and conventions 11

3 About this operating manual 12

4 Device description 13

4.1 Device types ...........................................................................................................................13

4.2 Functional description .............................................................................................................13

4.3 Measuring principle .................................................................................................................15

4.4 Measurement Range of the MSM+ HB....................................................................................16

4.4.1 Measurement Range of the MSM+ HB10 .................................................................16

4.4.2 Measurement Range of the MSM+ HB20 .................................................................17

4.5 Optical displays ......................................................................................................................18

4.6 Explanation of the product safety labels ..................................................................................19

4.7 Scope of delivery and accessories ..........................................................................................21

5 Quick overview installation 22

6 Transport and storage 23

6.1 Warning messages..................................................................................................................23

6.2 Removing transport lock .........................................................................................................24

6.3 Installing transport lock............................................................................................................24

6.4 Draining the cooling circuit of the MSM+ HB ...........................................................................25

6.5 Sealing the cooling circuit of the MSM+ HB.............................................................................25

6.6 Sealing the aperture of the HB objective..................................................................................26

6.7 Packing the device..................................................................................................................26

7 Mounting 27

7.1 Conditions at the installation site .............................................................................................27

7.2 Mounting position ...................................................................................................................28

7.3 Aligning the MSM+ HB ...........................................................................................................28

7.3.1 Important conditions for the position of the focused laser beam................................28

7.3.2 Mounting the cyclone................................................................................................29

7.3.3 Moving camera housing to axis center position ........................................................30

7.3.4 Positioning the pilot laser beam above the cyclone ...................................................31

7.4 Mounting the Fibre Bridge (option)...........................................................................................32

8 Connections 35

8.1 Overview of the connections ...................................................................................................35

8.2 Power supply (24V) .................................................................................................................36

8.3 Ethernet (LAN).........................................................................................................................36

8.4 Safety Circuit...........................................................................................................................37

8.5 Safety Circuit PLM In (option) ..................................................................................................38

8.6 Safety Circuit Fiber Out (option)...............................................................................................38

8.7 Inlet external trigger (In) ...........................................................................................................38

8.8 Outlet internal trigger (Out) ......................................................................................................38

8.9 Cooling water .........................................................................................................................39

8.9.1 Connecting water supply .........................................................................................39

8.9.2 Danger to the device ................................................................................................41

8.9.3 Parameters of cooling water connection ...................................................................41

8.10 Compressed Air .....................................................................................................................43

Revision 00 EN - 02/2022

MSM+ HB

35,0(6

9 Measurement 44

9.1 Warning messages..................................................................................................................44

9.2 Preparing measurement ..........................................................................................................45

9.2.1 Measurement process ..............................................................................................45

9.2.2 MSM+ HB with Fiber Bridge (option).........................................................................45

9.3 Connect / disconnect the device with the LaserDiagnosticsSoftware LDS...............................47

9.3.1 Switch on the device and connect it to the LDS........................................................47

9.3.2 If the device does not appear in the connections window .........................................49

9.3.3 Change the network address of a connected device.................................................49

9.3.4 Disconnect and switch off the device ........................................................................50

9.4 General procedure for measuring ............................................................................................51

9.4.1 Open the „Device control“ menu ...............................................................................51

9.4.2 Move camera housing to desired z-position ..............................................................51

9.4.3 Open a measuring mode with adapted toolbench.....................................................52

9.4.4 Conﬁgure and save measurement settings................................................................53

9.4.5 Messages in the LaserDiagnosticsSoftware LDS during measurement......................56

9.5 Single planes measurement ....................................................................................................57

9.5.1 Conﬁgure settings.....................................................................................................57

9.5.2 Conﬁgure advanced settings.....................................................................................60

9.5.3 Measure a plane .......................................................................................................63

9.5.4 Measure further planes .............................................................................................65

9.6 Continuous plane measurement (Monitor) ...............................................................................66

9.6.1 Conﬁgure settings.....................................................................................................66

9.6.2 Conﬁgure advanced settings.....................................................................................69

9.6.3 Aligne the MSM+ HB with the Monitor measuring mode ...........................................70

9.6.4 Measure a plane continuously...................................................................................71

9.7 Manual caustic measurement..................................................................................................73

9.7.1 Conﬁgure settings.....................................................................................................73

9.7.2 Conﬁgure advanced settings.....................................................................................75

9.7.3 Measure a caustic manually ......................................................................................78

9.8 Automatic caustic measurement .............................................................................................79

9.8.1 Conﬁgure settings.....................................................................................................79

9.8.2 Conﬁgure advanced settings.....................................................................................80

9.8.3 Measure a caustic automatically ...............................................................................83

9.9 Beam pointing.........................................................................................................................84

9.9.1 Conﬁgure settings.....................................................................................................85

9.9.2 Conﬁgure advanced settings.....................................................................................86

9.9.3 Measure beam pointing stability................................................................................87

9.10 Fiber mode measurement .......................................................................................................88

10 Troubleshooting 89

10.1 Error during a measurement....................................................................................................89

10.2 No measurement signal at the MSM+ HB ...............................................................................89

11 Maintenance and service 90

11.1 Maintenance intervals..............................................................................................................90

11.2 Cleaning the device surface ....................................................................................................90

11.3 Spare parts .............................................................................................................................90

11.4 Exchange wear parts ..............................................................................................................90

11.4.1 Demount the measuring objective.............................................................................90

11.4.2 Exchange protective window in front of the power output aperture ...........................92

11.4.3 Exchange beam splitter ............................................................................................93

11.4.4 Change aperture at the beam entrance.....................................................................94

12 Measures for the product disposal 94

13 Declaration of conformity 95

6Revision 00 EN - 02/2022

MSM+ HB

35,0(6

14 Technical data 97

15 Dimensions 98

15.1 Dimensions of the MSM+ HB10 ..............................................................................................98

15.2 Dimensions of the MSM+ HB10 with ﬁbre bridge ..................................................................100

15.3 Dimensions of the MSM+ HB20 (at zmax)................................................................................103

15.4 Dimensions of the MSM+ HB20 with ﬁbre bridge (at zmax)......................................................105

16 Appendix 107

16.1 Appendix A: GNU GPL license notice....................................................................................107

16.2 Appendix B: Using a PLM for power measurement ...............................................................107

16.2.1 Cooling water connection .......................................................................................107

16.2.2 Electrical connections .............................................................................................108

16.2.3 Transport or storage of the PowerLossMonitor PLM ...............................................108

16.2.4 Measurement with PLM ..........................................................................................109

16.3 Appendix C: Measuring pulsed irradiation ............................................................................110

16.3.1 Trigger operation.....................................................................................................110

16.3.2 Measuring conﬁguration selection ...........................................................................111

16.3.3 Inﬂuence of the pulse parameters on the integration time control ............................111

16.3.4 Examples for trigger operation ................................................................................115

16.3.5 Summary ................................................................................................................115

Revision 00 EN - 02/2022

MSM+ HB

35,0(6

8Revision 00 EN - 02/2022

MSM+ HB

35,0(6

PRIMES - The Company

PRIMES manufactures measuring devices used to analyze laser beams. These devices are employed for

the diagnostics of high-power lasers ranging from CO2lasers and solid-state lasers to diode lasers. A wave-

length range from infrared through to near UV is covered, offering a wide variety of measuring devices to

determine the following beam parameters:

• Laser power

• Beam dimensions and position of an unfocused beam

• Beam dimensions and position of a focused beam

• Beam quality factor M²

Development, production and calibration of the measuring devices is performed at PRIMES. This guarantees

optimum quality, excellent service, and a short reaction time, providing the basis for us to meet all of our

customers’ requirements quickly and reliably.

PRIMES GmbH

Max-Planck-Str. 2

64319 Pfungstadt

Germany

Tel +49 6157 9878-0

[email protected]

www.primes.de

Revision 00 EN - 02/2022

MSM+ HB

35,0(6

1 Basic safety notes

Intended use

The device has been designed exclusively for measurements in the beam of high-power lasers.

Use for any other purpose is considered as not intended and is strictly prohibited. Furthermore, intended use

requires that you observe all information, instructions, safety notes and warning messages in this operating

manual. The speciﬁcations given in chapter “14 Technical data” on page 97 apply. Any given limit values

must be complied with.

If not used as intended, the device or the system in which the device is installed can be damaged or dest-

royed. In addition, there is an increased risk to health and life. Only use the device in such a way that there is

no risk of injury.

This operating manual is an integral part of the device and must be kept in the immediate vicinity of the place

of use, accessible to personnel at all times.

Every person who is responsible for the installation, start-up or operation of the device must have read and

understood the operating manual and, in particular, the safety instructions.

If you still have questions after reading this operating manual, please contact PRIMES or your supplier for

your own safety.

Observing applicable safety regulations

Observe the safety-relevant laws, guidelines, standards and regulations in the current editions published by

the state, standardization organizations, professional associations, etc. In particular, observe the regulations

on laser safety and comply with their requirements.

Necessary safety measures

The device measures direct laser radiation, but does not emit any radiation itself. However, during the mea-

surement the laser beam is directed at the device. This produces scattered or directed reﬂection of the laser

beam (laser class 4). The reﬂected beam is usually not visible.

Protect yourself from direct and reﬂected laser radiation while working with the device by taking the following

measures:

• Never leave the device unattended when taking measurements.

• If the device is moved from its aligned position, increased scattered or directed reﬂection of the laser

beam occurs during measuring operation. Fix the device in such a way that it cannot be moved by unin-

tentional bumping or pulling on the cables.

• Connect the laser control’s safety interlock to the device. Check that the safety interlock will switch off

the laser properly in case of error.

• Install safety switches or emergency safety mechanisms that allow the laser to be switched off immedia-

tely.

• Use suitable beam guidance and beam absorber elements which do not emit any hazardous substances

when irradiated.

• Wear safety goggles adapted to the power, power density, laser wavelength and operating mode of the

laser beam source in use.

• Wear suitable protective clothing or protective gloves if necessary.

• If possible, also protect yourself from direct laser radiation and scattered radiation by using separating

protective devices that block or attenuate the radiation.

10 Revision 00 EN - 02/2022

MSM+ HB

35,0(6

Necessary safety measures due to magnetic spring with strong permanent magnet

The device contains a magnetic spring made of neodymium magnets with a very strong magnetic ﬁeld.

DANGER

Danger to life for persons with pacemaker or implanted deﬁbrillator

Magnetic spring rotors consist mainly of neodymium magnets (NdFeB magnets). These can

impair the correct functioning of pacemakers.

If you have a cardiac pacemaker or implanted deﬁbrillator, keep a minimum distance of 1m

from the device.

• Do not bring magnetic parts near the measuring device. Careless handling can lead to serious injuries

(bruises, broken ﬁngers, etc.).

• Please note that magnetic springs can act like tensioned springs. The sliders spring back to their original

position as soon as they are let loose, even if he machine is disconnected from the power supply.

• Keep a safe distance to the magnetic spring with objects that can be damaged by magnetism. These

include, for example, televisions and monitors, credit cards, computers, data carriers, video tapes, me-

chanical watches, hearing aids and loudspeakers.

Employing qualiﬁed personnel

The device may only be operated by qualiﬁed personnel. The qualiﬁed personnel must have been instructed

in the installation and operation of the device and must have a basic understanding of working with high-

power lasers, beam guiding systems and focusing units.

Conversions and modiﬁcations

The device may not be modiﬁed in terms of design or safety without the explicit consent of the manufacturer.

The same applies to unauthorised opening, dismantling and repair. The removal of covers is only permitted

within the scope of the intended use.

Liability disclaimer

Manufacturer and distributor exclude any liability for damages and injuries which are direct or indirect con-

sequences of using the device not as intended or modifying the device or the associated software without

authorization.

This manual suits for next models

Table of contents

Other Primes Diagnostic Equipment manuals

Primes

Primes HP-MSM-HB User manual

Primes

Primes FocusMonitor FM+ User manual

Primes

Primes Cube M User manual

Primes

Primes FocusParameterMonitor FPM 60 User manual

Primes

Primes FocusMonitor FM+ User manual

Popular Diagnostic Equipment manuals by other brands

Mindray

Mindray M7Vet Operation note

Autel

Autel MaxiProgrammer 201 manual

TEXA

TEXA TMD2 installation manual

Autel

Autel MaxiIM IM608 manual

Sealey

Sealey BT2012 instructions

Diagnoptics

Diagnoptics Age Reader Instructions for use

LAUNCH TECH

LAUNCH TECH X-431 PRO5 user manual

Hella Gutmann

Hella Gutmann Mega macs X quick start guide

Foxwell

Foxwell I80TS manual

KaVo

KaVo 3D eXam Operator's manual

ATEQ

ATEQ VT46 user guide

Hella Gutmann

Hella Gutmann mega macs X user manual

Autel

Autel MaxiFlash VCMI manual

Qiagen

Qiagen QIAcube Connect MDx user manual

Alber

Alber BDSU installation guide

St. Jude Medical

St. Jude Medical QUANTIEN Instructions for use

Bosch

Bosch DCU 100 Original instructions

Launch

Launch CNC-602A user manual