Poynting XPOL-1 User manual

Version: 3.0

Making wireless happen

XPOL-1 - User Guide

South Africa

Unit 4, N1 Industrial Park

Landmarks Ave

Samrand, 0157,

South Africa

Tel: +27 12 657 0050

[email protected]

Europe

Kronstadler Straße 4,

81677 München

Germany

Tel: +49 89 2080 265 38

Mob.: +49 176 529 733 50

[email protected]

www.poynting.tech

2 A-XPOL-0001_PCL

Version: 3.0 3

Index

1. Packing Check List 4

2. Tools Required 6

3. Introduction 7

4. Antenna Alignment 9

5. Antenna Mounting 9

Precautions

6. Cable Routing 10

7. Safety 11

4 A-XPOL-0001_PCL

Packing Check List

Item Description Quantity

1. A-XPOL-0001

Antenna Only

2. Pipe clamp 1

3. Suckers 4

4. Sucker mounting

pins

5. Wall knock-in

screws

6. SMA grip extender 2

Version: 3.0 5

The appearance of each component

Antenna Unit

Pipe Clamp

Suckers

Sucker mounting pins

Wall knock-in screws

SMA grip extender

6 A-XPOL-0001_PCL

Tools Required

Tools that may be required:

6mm Masonry drill bit

Impact drilling machine

Screw driver-Cross slot/Philips

Hammer

Version: 3.0 7

Introduction

XPOL-1 is a unique window, wall or pole mount-

able, high gain, CPE antenna. It can be mount-

ed outdoors on a pole of up to 50mm in diam-

eter, against a window or against a wall. Follow

the instructions below for installation.

Mounting Congurations:

1. Wall Mounting

• Select a suitable place for mounting the

antenna.

• Use a 6mm masonry drill bit to drill four holes

into the wall. See the dimensions below.

• Place the bracket over the four holes and

line up the holes in the bracket with the holes

in the wall. Place the four knock-in screws to

mount the bracket to the wall.

8 A-XPOL-0001_PCL

Introduction

2. Window Mounting

• Select a suitable mounting place for mount-

ing the antenna.

• Clean the selected area to remove the dirt.

• Place each of the four suckers through the

holes in the bracket.

• Insert the sucker pins from the front of the

bracket into the hole in the four suckers.

• Carefully press the antenna suckers against

a window, taking caution not to damage or

break the window.

Version: 3.0 9

Introduction

3. Pole Mounting

• Lay the antenna out at the installation site

and assemble the antenna on the ground.

• Place the pipe clamp through the bracket as

shown below.

• Next place the cable clamp around the pole

and tighten the screw on the cable clamp

until the bracket is secured to the pole.

• Mount the antenna so that there is at least 1

meter of clearance in all directions around

it and unobstructed line of sight to the cell

tower’s strongest signal.

10 A-XPOL-0001_PCL

Antenna Alignment

• To optimise the antenna alignment, rotate the

antenna left and right in 15° increments until you

get the best signal strength reading. Lock the

antenna down at the position where you get the

best signal strength.

Note: When rotating the antenna, be sure to let go of

the antenna as this may give inaccurate readings.

Antenna Alignment

• Use appropriate equipment (signal meter or

App) to locate the nearest cellular tower in your

location as well as the greatest signal strength

for the antenna to draw upon.

• Once you have located the tower, point the

main center beam of your antenna in the gener-

al direction of the cell tower.

Note: Recommended beam width is 70°

Back of

Antenna

Front of

Antenna

This manual suits for next models

Table of contents

Other Poynting Antenna manuals

Poynting

Poynting XPOL-2 User manual

Poynting

Poynting MIMO-4 User manual

Poynting

Poynting A-PUCK-0002-V1-01 User manual

Poynting

Poynting RIPPLE User manual

Poynting

Poynting OMNI-403 User manual

Poynting

Poynting OMNI-297 User manual

Poynting

Poynting OMNI-493 User manual

Poynting

Poynting PUCK-V1 User manual

Poynting

Poynting XPOL-2-5G User manual

Poynting

Poynting OMNI-702 User manual

Poynting

Poynting OMNI-214 User manual

Poynting

Poynting WLAN-61 User manual

Poynting

Poynting OMNI-293 User manual

Poynting

Poynting Moray Series User manual

Poynting

Poynting A-OMNI-0902-V1-02 User manual

Poynting

Poynting OMNI-900 User manual

Poynting

Poynting PUCK-5 User manual

Poynting

Poynting OMNI-280 User manual

Poynting

Poynting PUCK-V1 User manual

Poynting

Poynting PowerfulSignal PUCK-12 User manual

Poynting

Poynting XPOL-1-5G User manual

Poynting

Poynting OMNI-703 Operating manual

Poynting

Poynting OMNI-600-V1 User manual

Poynting

Poynting EPOYNT User manual

Popular Antenna manuals by other brands

Alfa Network

Alfa Network APA-L01 Specifications

Naval

Naval PR-422CA Operation manual

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series manual

TERK Technologies

TERK Technologies TV44 owner's manual

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK quick start guide

HP J8999A instructions

MobilSat

MobilSat MSP-S Mounting instructions

Steren

Steren ANT-UHF 13 instruction manual

Novatel

Novatel 600-G User information

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna owner's manual

TRENDnet

TRENDnet TEW-AO12O Specifications

Radio Shack

Radio Shack 15-1837 owner's manual

CommScope

CommScope CMAX-OMFX-43M-I53 Installation instruction

Ramsey Electronics

Ramsey Electronics DAP25 Kit assembly and instruction manual

COBHAM

COBHAM SAILOR 800 VSAT Replacement procedure

Trango Systems

Trango Systems AD900-9 Specification sheet

Steren

Steren ANT-100 user manual

Proxim

Proxim 5054-PA-23 quick start guide