Powr-Flite PP200-Q02-U User manual
Model No. PP200-Q02-U
Portable Battery Powered Mister
Operations and Maintenance Manual
For Commercial Use Only
1
Getting Started
Introduction 2
Warranty 2
Polarization Instructions 3
Important Safety Instructions 4-5
Specifications 6
Box Contents 7
Operating Instructions
Initial Assembly 8
Battery Charging 8
Battery Installation 8
Battery Charger Label Definitions 9
Operation 10
After Use 11
Customer Support 11
Trouble Shooting 11-12
Assembly and Maintenance
Assembly Instructions 13
Battery Installation 14
Spray Tip Replacement 15
Key Features 16
Schematics 17
Parts List 18-19
CONTENTS
2
INTRODUCTION
Warranty
Within 30 days of purchase, to activate product warranty,
go to: https://www.powr-flite.com/warranty-registration
For warranty information go to www.tornadovac.com.
Warning Labels
Prior to operating the Portable Battery Powered Mister, read
and understand completely this owner’s manual paying special
attention to warning labels. These labels indicate a potentially
hazardous situation that could result in death or serious injury if
not avoided. Use only as described in this manual.
Important
There are no owner serviceable parts inside this machine.
Removal of screws and accessing internal components will void
all warranty claims.
Personal Protection Equipment (PPE)
Personal Protection Equipment (PPE) should be worn during
the operation of this machine. Chemicals can remain airborne
for some time after application and therefore safety glasses
and masks are recommended. Gloves should be worn any time
chemicals are handled.
Center for Disease Control (CDC)
Only products shown on LIST N from the Center for Disease
Control (CDC) should be used through this machine in order to
kill viruses including SARS-CoV-2 (COVID-19). It is important
to follow mixture ratios exactly as indicated on product label.
Follow manufacturer’s recommendation of disposal of all
chemicals used in this machine.
3
POLARIZATION INSTRUCTIONS
Charger Polarization Instructions
The battery charger is equipped with a
2-wire, polarized AC power cord with one
blade wider than the other. This plug fits
in the power outlet only one way and is a
safety feature. If you are unable to insert
the plug fully into the outlet, try reversing
the plug. If the plug should still fail to
fit, contact an electrician to replace the
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Your new Powr-Flite unit is a high quality, precision-made product. All parts used
in the manufacturing of this unit have passed rigid quality control standards prior
to assembly. Please safeguard the original receipt/invoice given at the time of
purchase. If you experience any problems with your unit during the warranty period,
the original receipt/invoice will act as proof of purchase.
Upon receipt, inspect outer box for exterior damage. Unpack all internal parts,
ensure all items are present according to the owner’s manual, and review
components for damage.
Each unit is tested and thoroughly inspected prior to shipping. If damage is
discovered, immediately notify the transportation company that delivered your
machine and request an inspection. As a manufacturer, we are unable to act upon any
claim for concealed damage and you must originate the claim. Be sure to keep the
carton, packing inserts, and carrier’s receipt until the inspector has verified
your claim.
4
IMPORTANT SAFETY INSTRUCTIONS
Read and understand this owner’s manual and all labels on the unit
before operating. Safety is a combination of common sense, staying
alert, and knowing how your unit works. To reduce the risk of personal
injury or damage to your unit use only as indicated in this manual.
IMPORTANT:
The manufacturer cannot accept responsibility for damage
caused when the appliance is not used according to the instructions, or for uses other
than those for which it was intended.
WARNING:
• Fully assemble mister before operating.
• Use and store in a dry location.
• Do not allow machine to be used as a
toy. Close attention is necessary when
used by or near children.
• Do not use charger with damaged cord
or plug. If appliance or charger is not
working as it should, has been dropped,
damaged, left outdoors, or dropped
into water, contact an authorized
service center for service.
• Do not pull or carry charger by cord,
use cord as a handle, close a door on
the cord, or pull cord around sharp
edges or corners.
• Keep cord away from heated surfaces.
• Do not unplug charger by pulling on
cord. To unplug charger, grasp the
plug, not the cord.
• Do not handle charger, including
charger plug and terminals with
wet hands.
• Do not put any object into openings.
• Do not use with any opening blocked.
Keep free of dust, lint, hair and
anything that may reduce air flow.
• To ensure disinfection, follow chemical
manufacturer’s recommendation of
dwell time (how long the disinfectant
sits on a surface) prior to removal.
Dispose of wipe down towel properly
or allow disinfectant to air dry in place.
• Do not charge the unit outdoors.
• Only charge in temperatures between
32° - 113°F (0° - 45°C).
• Do not open, crush, expose to heat
above 212°F (100°C) or incinerate the
battery even if it is severely damaged.
• Use battery only with charger supplied.
• Battery and charger have no
serviceable parts and cannot be
repaired. Replace only with battery
and/or charger part numbers shown in
this manual.
SAVE THESE INSTRUCTIONS
5
IMPORTANT SAFETY INSTRUCTIONS
Pressurized Equipment Warning
Unit is under high pressure when machine is activated. If leaks are
visible around coiled hose connections, replace hose immediately
with part number shown in this manual. If pump continues
to run when the trigger is not depressed, turn machine OFF,
discontinue use and return to an authorized service center.
Flammability Warning
NEVER fill unit with flammable chemicals. Do NOT use
in an area where flammable fumes are present.
State of California Proposition 65 Warnings
WARNING: This product contains one or more chemicals
known to the state of California to cause cancer.
WARNING: This product contains one or more chemicals
known to the state of California to cause birth defects or other
reproductive harm.
Chemical Warning
Straight bleach should never be used solely in this unit. When
sodium hypochlorite, a component found in bleach, dissolves in
water, two substances form which play a role in both disinfection
and oxidation. Manufacturer’s recommendations must be
followed for the chemical being used to ensure the proper
balance is achieved that will disinfect and not oxidize the metal
components found in this machine. It is recommended to flush
the entire system thoroughly with clean water after use and
prior to storage. Store unit dry and empty for prolonged periods
following a system flush. Use only water-based chemicals to
clean machine.
Intended Use
Do NOT modify this unit in any way or adapt it for any other use.
Modification of this unit in any way will void all warranties and
could create safety hazards.
6
SPECIFICATIONS
Pressure (Max.) 130 PSI / 9 BAR
Weight (Empty) 3.9 LBS / 1.8 KG
Weight (Full of Solution) ≤7.5 LBS / 3.4 KG
Dimensions (HxWxL) 12” x 4” x 8” / 305 x 102 x 203 mm
Voltage 10.8 VDC
Flow 1.75 GPH / 6.6 LPH
Run Time 6 Hours Continuous
Tank Capacity 1/2 Gallon / 2 Liters
Hose Length 2’ – 10’ Stretch
Battery Recharge 90 Minutes
Battery Storage 32° - 140° F / 0° - 60° C
In Tank Filter YES
Anti Skid/Mark-Free Pads YES
Never dispose of lithium-ion batteries in your regular trash or
recycling bin. Batteries must be disposed of properly.
Always remember to recycle
7
BOX CONTENTS
Upon initial receipt of unit, open box and ensure all parts are included as shown below:
Wand Assembly Coiled Hose
Strap Assembly Battery Charger
Mister Assembly Battery
Owners Manual
8
OPERATING INSTRUCTIONS
Initial Assembly
1. Remove all contents from box and ensure all components are present per the
BOX CONTENTS section of this manual.
2. Firmly attach one end of hose to the wand assembly and the other end to the
machine ensuring the hose is fully inserted (Figure 1 on page 13).
3. Attach the shoulder strap to the unit. The mister can be used with the carrying
handle or the shoulder strap (Figure 2 on page 13).
Battery Charging
1. Remove battery and battery charger from individual boxes.
2. Plug charger AC cable into 115V wall socket and insert battery into charger.
Battery was designed to fit into charger only one way to ensure alignment of
charging ports.
3. If the battery needs charging, the light on the charger will turn red. When
charging is complete, the red light will turn green. Flashing green light
indicates charger is in stand-by mode.
Battery Installation
1. Once the battery is fully charged, insert battery in the port located underneath
the main unit (Figure 3 on page 14).
2. Insert battery into port and push until tabs engage. Battery will only insert into
port one way.
3. To remove battery, simultaneously depress tabs on side of battery and pull out
(Figure 4 on page 14).
4. Charge as required.
It is important to NOT install a battery into a unit that is turned
ON. Verify the switch is in the OFF position prior to
inserting battery.
Do NOT turn unit ON without verifying there is fluid in the
machine. Running the system dry will damage the pump.
Other manuals for PP200-Q02-U
1
Table of contents
Other Powr-Flite Paint Sprayer manuals
Popular Paint Sprayer manuals by other brands
Bonide
Bonide 051 Operation and service instructions
zogics
zogics Z-DAS instruction manual
KISANKRAFT
KISANKRAFT KK-KBS-165 Operation manual
Matrix
Matrix SG 650 Translation of the original instructions
Anest Iwata
Anest Iwata SGA-3 Installation, use & maintenance instruction manual
paasche
paasche VV Instructions and parts list
