Powerware 5125 P33 User manual
Powerware®5125
Installation Guide for IBM Applications
Guide d’installation pour applications IBM
Installationsanleitung für IBM-Anwendungen
Guida all’installazione per le Applicazioni IBM
Guía de instalación para aplicaciones de IBM
www.powerware.com
Powerware is a registered trademark and X-Slot and ConnectUPS are trademarks of Powerware Corporation.
Powerware est une marque déposée et X-Slot et ConnectUPS sont des marques commerciale de Powerware Corporation.
Powerware ist ein eingetragenes Warenzeichen und X-Slot und ConnectUPS sind ein Warenzeichen der Powerware
Corporation.
Powerware è un marchio di fabbrica depositato e X-Slot e ConnectUPS sono marchi di fabbrica della Powerware
Corporation.
Powerware es una marca comercial registrada y X-Slot y ConnectUPS son marcas comerical de Powerware Corporation.
.
Copyright 2001 Powerware Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Powerware Corporation.
.
Copyright 2001 Powerware Corporation, Raleigh, NC, Etats-Unis. Tous droits réservés. Aucune partie de ce document
ne peut être reproduite d’une quelconque manière sans l’accord écrit explicite de Powerware Corporation.
.
Copyright 2001 Powerware Corporation, Raleigh, NC, USA. Alle Rechte vorbehalten. Kein Teil dieser Druckschrift darf
ohne ausdrückliche schriftliche Genehmigung von Powerware Corporation auf irgendeine Weise vervielfältigt werden.
.
Copyright 2001 Powerware Corporation, Raleigh, NC, USA. Tutti i diritti riservati. Nessuna parte del presente
documento può essere riprodotta in alcun modo senza l’esplicita autorizzazione scritta di Powerware Corporation.
.
Copyright 2001 Powerware Corporation, Raleigh, NC, EE.UU. Todos los derechos reservados. Ninguna parte de este
documento se puede reproducir sin la autorización expresa por escrito de Powerware Corporation.
i
Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
TABLE OF CONTENTS
Installation 3.......................................................
Electrical Requirements 4.........................................................
UPS Setup 5..................................................................
Tools Required 5.............................................................
Checking the Battery Recharge Date 5.............................................
Rack-Mount Setup 6..........................................................
Installing Optional Equipment 7.....................................................
Power Management Software 7..................................................
Ground Bonding Screw 7.......................................................
Remote Emergency Power-Off 8..................................................
Cord Connections 9.............................................................
UPS Startup 15.................................................................
Service and Support 15...........................................................
TABLE DES MATIÈRES
Installation 17.......................................................
Spécifications électriques 18.......................................................
Installation de l’onduleur 19........................................................
Outils nécessaires 19..........................................................
Vérification de la date de charge de la batterie 19......................................
Configuration en baie 20........................................................
Installation des dispositifs optionnels 21...............................................
Logiciel Power Management 21...................................................
Visdemiseàlaterre 21........................................................
Téléalimentation d’urgence (REPO) 22...............................................
Connexion des cordons 24.........................................................
Mise en marche de l’onduleur 28....................................................
Service après-vente et assistance technique 29..........................................
Table of Contents
ii Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
INHALTSVERZEICHNIS
Installation 31.......................................................
Elektrische Anforderungen 32.......................................................
Aufstellen der USV 33............................................................
Erforderliches Werkzeug 33......................................................
Überprüfen des Batterieladedatums 33..............................................
Aufstellung im Gestell 34.......................................................
Einbau von optionaler Ausrüstung 35..................................................
Power Management Software 35..................................................
Erdungsschraube 35...........................................................
Notausschaltung 36...........................................................
Kabelanschlüsse 38..............................................................
Inbetriebnahme der USV 43........................................................
Kundendienst und Unterstützung 43..................................................
SOMMARIO
Installazione 45......................................................
Requisiti elettrici 46..............................................................
Installazione dell’UPS 47..........................................................
Utensili richiesti 47............................................................
Verifica della data di ricarica della batteria 47.........................................
Installazione per il montaggio a rack 48..............................................
Installazione delle apparecchiature opzionali 49..........................................
Software per la gestione del risparmio energetico 49....................................
Vite di collegamento a massa 49..................................................
Spegnimento d’emergenza remoto 50...............................................
Connessione dei cavi 51...........................................................
Avvio dell’UPS 56...............................................................
Assistenza e supporto 57..........................................................
Table of Contents
iii
Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
CONTENIDO
Instalación 59.......................................................
Requisitos eléctricos 60...........................................................
Configuración del SIE 61..........................................................
Herramientas necesarias 61......................................................
Verificación de la fecha de recarga de las baterías 61....................................
Configuración de montaje en estante 62.............................................
Instalación de equipo opcional 63....................................................
Software de administración de energía 63............................................
Tornillo de unión a tierra 63......................................................
Parada de emergencia remota 64..................................................
Conexiones de cables 66..........................................................
Puesta en marcha del SIE 71........................................................
Servicio y soporte 71.............................................................
Table of Contents
iv Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
This page intentionally left blank.
Page intercalaire.
Diese Seite wurde absichtlich nicht bedruckt.
Questa pagina è stata intenzionalmente lasciata bianca.
Esta página se dejo en blanco intencionalmente.
1
Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
INSTALLATION
The Powerware
9
5125 P33 UPS can be purchased separately or
factory-installed in an IBM pSeries rack.
Table 1. Standard UPS Components
IBM
Model Number
IBM Part
Number
Powerware
Part Number Description
P33 21P7219 05147155-3901 P33 UPS 2U high (in shipping carton or factory-installed in rack)
—21P7229 05147532-3901 P33 Accessory Kit
6630 21P7220 103002291-002 4-Post Rail Kit (in shipping carton or factory-installed in rack)
9
8
5
1
4
0
H
3
0
1
8
(1) NEMA L6-30R to IEC 320-C20P, 6 ft
9851 40H3018 — (1) IEC 320-C19 to NEMA L6-30P, 1.5 ft
9
8
5
5
1
7
G
1
8
6
5
(1) IEC 309-CEE17R, 2-pole, 3-wire, 32A to IEC 320-C20P, 2.5m
9855 17G1865 —(1) IEC 320-C19R to IEC 309-CEE17P, 2-pole, 3-wire, 32A, 0.6m
Table 2. P33 UPS Components
Quantity IBM Part
Number
Powerware
Part Number Description
121P7219 05147155-3901 P33 UPS with Internal Battery Pack*
1 — — Front Bezel*
1Set — — Mounting Handles and Hardware*
*NOTE If the UPS is factory-installed in an IBM rack, these items are pre-assembled.
Installation
2Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
Table 3. P33 Accessory Kit Components
Quantity IBM Part
Number
Powerware
Part Number Description
1—164201355
Powerware 5125 User’s Guide
1—164201356
Powerware 5125 Installation Guide for IBM Applications
3 — 60420055 IEC 320-C13 to C14, 10A Equipment Power Cords (6 ft/1.8m)
1 — 05146745-31 Powerware Software Suite CD-ROM
1Bag — — Cord Rention Clips
1 — — REPO Connector
1 — 164201359
Multi-Server Module User’s Guide
3—124102022-002 UPS to Server Communication Cables (DB-9 to DB-9, 6 ft/1.8m)
NOTE For those items without an IBM Part Number, contact Powerware for additional parts.
Table 4. UPS Options
IBM
Model Number
IBM Part
Number
Powerware
Part Number Description
6607 21P7221 05147156-3901 Optional Extended Battery Module (EBM) 2U*
2932 —05146288-3901 ConnectUPS-MX SNMP Module
*NOTE Up to four EBMs may be connected to the UPS. If there are two UPSs in a rack, up to two EBMs may be connected
to each UPS.
Electrical Requirements
The UPS requires a dedicated branch circuit that meets the following
requirements:
:16–32A, 200–240 Vac receptacle (type varies by country)
:Single-phase
:50–60 Hz
Refer to the pSeries Site and Hardware Planning Information Guide
(SA38-0508) for more information:
http://www-1.ibm.com/servers/eserver/pseries/library/hardware_docs
Installation
3
Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
Table 5. UPS Model Specifications
IBM Model Number P33
Output Receptacles (9) IEC 320-C13, (1) IEC 320-C19
Input Connection 16A, IEC 320-C20 input connector
Power Rating 3.0 kVA/2.7kW
Voltage 200–240V single-phase
Frequency 50/60 Hz, auto-sensing
NOTE For more information refer to “Specifications” in the
Powerware 5125 User’s Guide
.
UPS Setup
NOTE If your UPS is already installed in an IBM pSeries (RS/6000) system, then skip
to “Installing Optional Equipment” on page 5.
Tools Required
To assemble the components, the following tools may be needed:
:Medium flat-bladed screwdriver
:#2 Phillips screwdriver
Checking the Battery Recharge Date
Check the battery recharge date label located on the UPS carton.
NOTE If the battery recharge date has expired and the batteries have never been
recharged, contact your service representative (see “Service and Support” on page 13).
Installation
4Powerware®5125 Installation Guide for IBM Applications :164201356 B Uncontrolled Copy
Rack-Mount Setup
The UPS can be installed in 19-inch racks and needs only 2U of valuable
rack space.
CAUTION
The UPS and Extended Battery Module are heavy. A minimum of two people are
required to lift the UPS into the rack.
NOTE Fixed mounting rails are required for each cabinet. If fixed rails are not already
installed in your rack, contact your local IBM representative to order a rail kit. If you
are installing the UPS in a non-IBM rack, contact your Powerware representative.
Use the following procedure to install the UPS in a rack:
1. Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
2. Attach the supplied mounting handles to the mounting
brackets (see Figure 1).
3. If installing optional Extended Battery Modules, repeat Steps 1
and 2 for each cabinet.
Mounting Handle
Mounting
Bracket
Figure 1. Installing the Mounting Brackets
NOTE The UPS and EBMs MUST be installed at the bottom of the rack. If placed in a
rack with existing equipment, the rack must be reconfigured to allow the UPS
installation at the bottom of the rack.
NOTE The EBMs must be installed below the UPS as shown in Figure 2.
4. Slide the UPS and any optional EBMs into the rack.
5. Secure the units to the rack according to the rail kit
instructions.
Table of contents
Languages:
Other Powerware UPS manuals
Powerware
Powerware Prestige series 9 User manual
Powerware
Powerware 9305 Operating manual
Powerware
Powerware 9910 p Series User manual
Powerware
Powerware Prestige 6000 Setup guide
Powerware
Powerware 9125 PowerPass User manual
Powerware
Powerware 5105 User manual
Powerware
Powerware 9330 User manual
Powerware
Powerware 5125 Tower User manual
Powerware
Powerware 9120 User manual
Powerware
Powerware BPIV 30 kVA User manual
Powerware
Powerware 5105 User manual
Powerware
Powerware 9315s User manual
Powerware
Powerware 9125 User manual
Powerware
Powerware 5110 User manual
Powerware
Powerware 9320 User manual
Powerware
Powerware 9125 User manual
Powerware
Powerware 5140 User manual
Powerware
Powerware 3110 User manual
Powerware
Powerware Ferrups FE/QFE 500VA User manual
Powerware
Powerware 9335 User manual
