4 Power
switch/setting
1.Turn on the MPS(mobile power station);
2.Wake up LCD and ambient light;
3.When the product beeps for alarm, mute;
Press the key twice within 1.5s
turn off ambient light.
Press the button for 4 ~10s, enter function setting mode
1.Short press the button to switch between superfast charging
mode, ECO mode and UPS mode;
2.Select UPS mode, press the button for 1~4s, short press to
select ON or OFF, press the button again for 1~4 seconds to
complete the setting;
3.No press for 10 seconds or press the button again for 4~ 10s
will exit the setting interface;
5 Ambient light
3 colors: white,blue,orange
1.The brightness of the white light changes gradually,
indicating the discharging mode;
2.The brightness of the blue light changes gradually, indicating
the charging mode;
3.The blue light is always on, indicating that the battery is fully
charged;
4.The brightness of the orange light changes gradually,
indicating the failure mode;
5.The ambient light is always off, indicating that the MPS is in
standby mode or off;
6.Press the power switch twice within 1.5s, you can turn off
the ambient light, and short press once to wake up it.
6 DC switch
1.Short press the switch button to enable or disable USB-C (9),
USB-A (11) and car supplementary output (15);
2. When DC output is enabled, the DC indicator light will be on.
7 AC switch
1.Short press the switch button to enable or disable the AC
output;
2. When AC output is enabled, the AC indicator light will be
8 Solar/car input
1.Connect the cigarette lighter port of the car to the MPS
through the car charger wire, charge MPS;
2. If you purchased the solar panel, connect it to the input
through solar charging wire, charge the MPS.
9 USB-C
You can charge type-C interface devices such as PC and mobile
phone.
