powersoft QTU1400 User manual
QTU1400
User Manual
COD: MAN-QTU-USER_MAN_-___10-EN-10
Sept 2002
2/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Caution
QTU1400
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable
parts inside. Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
SAFEGUARDS: Electrical energy can perform many useful functions. This unit has been
engineered and manufactured to assure your personal safety. Improper use can result in
potential electrical shock or fire hazards. In order not to defeat the safeguards, observe the
following instructions for its installation, use and servicing.
NOTES: This equipment has been tested and found to comply by Competent Body (Directive
89/336/EEC-EMC) pursuant to the product family standard for audio professional use:
EN 55103-1 and EN 55103-2 standard (with the limits for E1 and E2 electromagnetic environment);
EN61000–3 –2 , EN 61000 –3 -3
This is a Class A product. In a domestic environment this product my cause radio interferences in
which case the user may be required to take adequate measures.
This equipment has been tested and found to comply by Notified Body (Directive 73/23/EEC L.V)
pursuant to the audio apparatus safety requirements: Standard EN 60065.
Warning Notices
Location
Install the amplifier where it will not be directly exposed to high temperature or humidity.o not install the
amplifier in a location that is exposed to direct rays of the sun, or near to hot appliances or radiators. Excessive
heat can adversely affect the operation and internal components. Installation of the product in a damp or dusty
environment may result in malfunction or accident.
Precautions regarding installation
Placing and using the amplifier for long periods on heat-generation sources will affect performances. Avoid
placing the amplifier on heat-generating sources. Install this amplifier as far as possible from tuners and TV
sets. An amplifier installed in close proximity to such equipment may cause noise or degradation of the picture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
3/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Safety rules
QTU1400
This device must be powered exclusively by earth connected mains sockets in electrical networks compliant to
the IEC 364 or similar rules.
Is absolutely necessary to verify this fundamental requirement of safety and, in case of doubt, require an
accurate check by a qualified personal.
The constructor cannot be considered responsible for eventual damages caused to persons, things or data for
the missing of accurate earth link.
Before powering this device verify that the correct voltage rating.
Verify that your mains connection is capable to satisfy the power ratings of the device.
Be sure that connection socket or circuit breaker is accessible to the operator for servicing
Be sure that sufficient air cooling in provided inside the rack mounting unit
Do not spill water or other liquids into or on the unit.
Do not use this unit if the electrical power cord is frayed or broken.
Do not remove the cover. Removing the cover will expose you to potentially dangerous voltage.
No naked flame sources such like lighted candles should be placed on the product.
Contact the authorized center for ordinary and extraordinary maintenance.
Input mains and output power connection wirings must not to be accessible to the user.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
4/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Specifications
QTU1400
GENERAL
Type .…………....… 4 channels digital amplifier for PA professional applications with insulated output
POWER REQUIREMENTS
All models..………...........................................……..… AC 95V ÷265V, 50/60 Hz / 450V A
Weight ........................................................................ 29 Kg
External dimensions ……………………………………..485mm(W),480mm(D),88.4mm(H)
Enviromental temperature……………………………… 40°C
Overall efficiency…………………………………………better than 75%
AUDIO SECTION
Slew Rate (100V output / 28.5 Ω Load) ............…... 30V/µS
S/N ratio ………………………………...............….… >105 dB/A
Distortion………………………….....................…..... <0.1% (THD, DIM, SMPTE)
Inputs ..............……………………………...........…..... Balanced to ground, three poles in line
Impedance ...………………………………...........….... 10 K
Gain …….................………………………………........ 34, 37, 40 dB (50, 70, 100Voutput)
Output .....................…………………………….....…... Floating insulated
Bandwidth (100V output / 28.5 Ω Load) …..……….… 50 Hz -20 KHz / 0 –3dB
.
POWER SPECIFICATIONS
Power continuous all channels driven (1KHz, 0.5% THD)
100V out / 28.5 Ω Load = 350 W minimum load range > 28.5 Ω
70V out / 14.0 Ω Load = 350 W minimum load range > 14.0 Ω
50V out / 7.14 Ω Load = 350 W minimum load range > 7.14 Ω
FUNCTIONS
•Thermal protection (over-temperature power limiting, thermal shutdown)
•Auto reset short-circuit / overload output protection
•Soft Clip limiter and High frequency gain control
•Temperature controlled fan
•Input output monitoring by inner loudspeaker or external headpones
•Switchable auxiliary inputs by 24 Vdc external command
•Remote controlling and diagnosys option board
5/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Connection description
QTU1400
2712
11
10
13
9
8
3
4
5
6
1
14
6/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Front/Rear panel description
QTU1400
FRONT PANEL:
1) Removable dust cover
2) Mains switch
3) Channel gain control knob
4) Channel output level indicator,
Ready status channel 1 / 2 (3 / 4)
Temperature status channel 1 / 2 (3 / 4)
Input signal presence
Output stage protection indicator
Input signal monitor selection indicator
Output signal monitor selection indicator
5) Monitor gain control knob
6) Monitor selection pushbutton
7) Exclusive headphone 6.3mm jack
BACK PANEL:
8) Mains IEC socket
9) Data port connector (optional)
10) ID selection encoders (optional)
11) Auxiliary input selection command (24Vdc coil relays) conn1
12) Auxiliary balanced input (In+, Gnd , In-) conn2
13) Output power connector (100V, 70V, 50V, 0 ) conn3
14) Line balanced input (In-, Gnd , In+) conn2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CHECK PROPER EARTH CONNECTION BEFORE OPERATE
THIS DEVICE IS DESIGNED TO WORK WITH EARTH CONNECTION
7/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Mating connectors
QTU1400
Conn1 (2POLES 5.08mm): Phoenix Contact MSTB 2,5/2-ST-5,08 (Cod. Ph.C. 1757019)
(Cod.Powersoft CN000149)
Conn2 (3POLES 5.08mm): Phoenix Contact MSTB 2,5/3-ST-5,08 (Cod. Ph.C. 1757022)
(Cod.Powersoft N000150)
Conn3 (4POLES 5.08mm): Phoenix Contact MSTB 2,5/4-ST-5,08 (Cod. Ph.C. 1757035)
(Cod.Powersoft CN000151)
Servicing
QTU1400
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
This device must be correctly cooled for correct and reliable operation:
Clean front panel dust filter every 2000 Hours of operation.
Remove the N°3 exegonal screws on front grille and clean the filter with compressed air.
8/8
Powersoft s.r.l. -P. IVA n. 04644200489 –Via E.Conti, 5 Scandicci -Tel.: (+39) -55 -7350230-Fax: 7356235
Dimensions
QTU1400
Table of contents
Other powersoft Amplifier manuals
powersoft
powersoft Mezzo Series User manual
powersoft
powersoft T Series User manual
powersoft
powersoft Ottocanali 4K4 User manual
powersoft
powersoft X8 User manual
powersoft
powersoft Ottocanali HGT Series User manual
powersoft
powersoft X Series User manual
powersoft
powersoft X4 User manual
powersoft
powersoft Ottocanali 12K4 User manual
powersoft
powersoft DigiMod 3004PFC4 User manual
powersoft
powersoft M30D User manual
powersoft
powersoft M30D User manual
powersoft
powersoft X4 User manual
powersoft
powersoft X8 Service manual
powersoft
powersoft S Series User manual
powersoft
powersoft Ottocanali 12K4 User manual
powersoft
powersoft T Series User manual
powersoft
powersoft Ottocanali 4K4User Guide v 1.6March 2013Ottocanali... User manual
powersoft
powersoft Digam Q Series User manual
powersoft
powersoft M30D User manual
powersoft
powersoft DIGAM K series User manual
