PowerPac PPFS818 User manual
18” ELECTRIC STAND FAN WITH METAL BLADE
PPFS818
Parts & Description s
LIST OF COMPONENTS
1.
Front Grille
10.
Main Body screw
2.
Back Grille
11.
Extension Pole
3.
Motor Shaft
12.
Height Adjustment Ring
4.
Safety Guard
13.
Outer Pole
5.
Fan Blade (Metal)
14.
Base Cover
6.
Fan Blade screw
15.
Base
7.
Main Body (Timer & Speed buttons)
16.
Washer
8.
Fan Head (containing Motor)
17.
L-screw
9.
Grille Ring with Grille Ring clip
Front
Grille
Fan Blade
screw
Fan Blade
Back
Grille
Motor
Shaft
Main Body
(Timer & Speed buttons)
Motor
Shaft
Safety
Guard
Swing
button
Base Cover
Washer
Fan Blade
Base
L-screw
Fan Head
Grille Ring with Grille Ring clip
Main Body
(Timer & Speed buttons)
Extension Pole
Outer Pole
Height Adjustment Ring
Main Body screw
HOW TO ASSEMBLE s
Warning: DO NOT operate the fan with any of its parts unassembled. The entire
assembled unit works as a single appliance. The fan must only operate in the upright
position. Any other position will be hazardous.
Please refer to the video for the correct sequence of steps: https://youtu.be/tQ5cC_tP7rg
1. Unpack all parts from the package and place them on the floor.
2. Unscrew the
!⑰"
L-screw and
⑯"
Washer from the
⑬!
Outer Pole and put it aside
temporarily. Holding the
⑮!
Base (with the
⑭
Base Cover attached on top), insert
the
⑬!
Outer Pole containing the
⑪!
Extension Pole onto the
⑮!
Base and tighten
it with the
⑰"
L- screw, with the
⑯"
Washer placed in between the
⑮!
Base and
the
!⑰"
L-screw.
3. Pull the
⑪!
Extension Pole out of the
⑬!
Outer Pole to your desired height and
tighten using the
⑫!
Height Adjustment Ring between the
⑪!
Extension Pole and
the
⑬!
Outer Pole.
4. Loosen the
⑩!
Main Body screw on the
⑨!
Main Body.
Main Body
(Timer & Speed buttons)
Main Body screw
5. Insert the
⑨!
Main Body onto the top of the
⑪!
Extension Pole. Secure it by
tightening the
⑩!
Main Body Screw.
6. Assemble the
②!
Back Grille and the
⑤!
Fan Blade on the
⑧!
Fan Head as
described below:
• Unscrew the
!④
Safety Guard by turning anti-clockwise
Safety Guard
Motor Shaft
Main Body
(Timer & Speed buttons)
Main Body screw
• Insert the
②!
Back Grille through the
③!
Motor Shaft and secure it to the
⑧!
Fan Head by screwing the
④
Safety Guard clockwise.
• Holding the
⑤!
Fan Blade, loosen the
⑥!
Fan Blade screw anti-clockwise.
Fan Blade screw
• Insert the
⑤!
Fan Blade into the
③!
Motor Shaft rear first.
!
!
!
The picture of the left shows the ③" Motor Shaft with the groove easily
seen. The picture on the right shows the rear of the ⑤"Fan Blade.
Motor Shaft groove Fan Blade screw Fan Blade
• Rotate the
⑤!
Fan Blade until the
⑥!
Fan Blade screw is level with the
groove on the
③!
Motor Shaft and tighten the
⑥!
Fan Blade screw
clockwise.
• Ensuring the logo at the front of the
①!
Front Grille is positioned properly,
attach the
①!
Front Grille to the
②!
Back Grille and secure them by turning
the screw of the
⑨!
Grille Ring Clip at the bottom of the Grille Ring.
Grille Ring with Grille Ring Clip
Front Grille
Warnings s
ATTENTION :
Read this booklet carefully as it contains important instructions for a safe installation,
use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical
appliances:
1. Read all instructions before using the appliance.
The Appliance
2. This appliance must be used only for the purpose it was expressly designed; any
use NOT complying with the instructions contained in the manual is considered
inappropriate and dangerous. The manufacturer is NOT responsible for possible
damages caused by the inappropriate and/or unreasonable use.
3. The installation/assembly of the appliance will be made in accordance with the
indications of the manufacturer. A wrong procedure may cause damages to
persons, animals or objects, for which the manufacturer cannot be considered
responsible.
4. Before use, check the integrity of the appliance and power cable. DO NOT
operate the appliance when its Motor Unit is damaged. In case you are not sure,
contact a qualified person. If the power cable is damaged, it must be replaced by
the manufacturer or its service agent, or a qualified technician in order to avoid a
shock hazard.
5. Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
and that the wall socket is properly grounded. This appliance is fitted with an
earth wire for extra safety.
6. DO NOT power the appliance using multiple sockets. If possible, avoid the use
of adapters and/or extension cables; if their use is absolutely necessary, use
only materials in compliance with the current safety regulations and according to
the electrical parameters of the adapters.
7. The appliance must NOT be switched on using external timers and/or other
remote control appliances which are not specified in this manual.
8. Only use original components & accessories provided by the manufacturer. Any
non-original component or accessory NOT recommended by the manufacturer
(including, but not limited to, Front & Back Grilles, Back Grille screws, Fan Blade,
Fan Blade screw, Fan Head, Main Body, Main Body screw, Height Adjustment
Ring, Poles, Base, etc.) made by other manufacturers or by the same
manufacturer but for other models of the same capacity or otherwise) may cause
injuries to persons or damage to the appliance.
9. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept
out of the reach of children or disabled persons since they represent potential
sources of danger.
Location
10. This appliance is NOT suitable to be used or stored near heat sources (open
flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the
presence of flammable substances such as gas, vapour, mist or dust, in
atmospheric conditions when, after ignition, the combustion is spread in the air).
Items containing these substances should never be placed in the appliance, and
never be used to clean the appliance in order to avert the risk of fire or
explosion.
11. The appliance should NOT be placed on a surface, or in the vicinity of, objects
which can be damaged by heat, such as carpets or plastics. DO NOT locate
multiple portable socket outlets or power supplies at the bottom or rear of the
appliance. When using the appliance, the surface that the appliance is placed
upon as well the surface immediately above (e.g. a wooden cabinet above the
appliance), may become hot. If the appliance is operated on wooden furniture,
use a protective pad to prevent damage to delicate finishes.
12. Place the appliance at a proper distance from the objects or surrounding walls
making sure that its functioning will NOT cause accidental damages. There
should be at least 10 cm of free space from the back, left & right sides, and at
least 20 cm the top of the appliance. Never put things on top of the appliance.
13. Avoid placing the power cable on abrasive or sharp surfaces or in positions
where it can be damaged easily. The cable must NOT be placed under carpets,
or covered with throw rugs, runners or similar. Arrange the cable away from the
high traffic area, and where it will NOT be tripped over.
14. DO NOT operate the fan next to an open window while it is raining. Rainwater
splashing onto the fan may cause an electric shock
15. DO NOT use or store the appliance outdoors. Store and use the appliance only
indoors, or in any case, protected from weathering such as rain, direct radiation
of the sun and dust.
Table of contents
Other PowerPac Fan manuals
PowerPac
PowerPac PPTF460 User manual
PowerPac
PowerPac iFan IF9669 User manual
PowerPac
PowerPac PP2809 User manual
PowerPac
PowerPac PPFS212 User manual
PowerPac
PowerPac PPTF303 User manual
PowerPac
PowerPac PP2814 User manual
PowerPac
PowerPac PPUF223 User manual
PowerPac
PowerPac PPTF290 User manual
PowerPac
PowerPac PPFS70 User manual
PowerPac
PowerPac PPC603 User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
