8 GB/IE
Safety instructions
CAUTION! DANGER OF EXPLOSION! Do not
operate the LED work lamp in potentially explosive
environments in which there are inflammable vapours,
gases or dusts.
The LED work lamp is splash-proof. The product and the adapter
must never be immersed into water or other liquids. Otherwise
there is a risk of electric shock! Never hang the product near a
washbasin, a pond or the like.
Connect the LED work lamp to a properly installed mains socket or
a suitable cigarette lighter socket only. The voltages in each case
must comply with information given in the section “Technical data”.
Ensure that the electrical socket is easily accessible so that you
can pull the plug quickly out of the socket if necessary.
Do not carry out any modifications or repairs to the product yourself.
The LEDs cannot and must not be replaced.
ATTENTION! The protective cover in front of the LEDs is non-replace-
able. Dispose of the LED work lamp when you detect cracks or
signs of breakages in the protective cover. Dispose of the product
when the LED work lamp, the cables or adapters are damaged.
Never connect the LED work lamp to a power supply socket if the
LED work lamp, power lead or socket is damaged or the LED work
lamp has been dropped.
Ensure that the power lead cannot become damaged by sharp
edges or hot objects. Unwind all the lead completely before use.
Keep easily flammable materials away the product. Never hang
objects above the LED work lamp or the mains adapter and never
cover them.
Pull the mains adapter / plug out of the mains socket/cigarette
lighter socket when you are not using the LED work lamp or before
you clean it. Do this as well if signs of a fault develop during use
or charging, e.g. smoke, burning smell etc., or during a storm.
56301_pow_LED_Stableuchte_Content_LB6.indd 8 06.10.10 14:23
