Power Plus Mobility EXTREME User manual
Owners Manual
POWER PLUS MOBILITY
OUR PRODUCTS WILL MOVE YOU
At Power Plus Mobility, we care!
Thank you for choosing a wheelchair from Power Plus Mobility Inc. We are always improving
in our ways to serve you beer and would love to hear your quesons or comments about our
literatures, the reliability of our chairs and service you received while making the decision of
choosing our wheelchair. Please feel free to contact us via our email address:
customer@powerplusmobility.com
Quesons regarding your wheelchair?
The best way to get your quesons answered is by your authorized wheelchair dealer since
they know your wheelchair and have the training for it. Please ll in your dealers informaon
below so you have it handy just in case you have any quesons or concerns about your
wheelchair. Your dealer will guide you on the right direcon to take any further steps.
Dealer name: ________________________________________________
Dealer Address: ______________________________________________________
__________________________________________________________________
Tel: _________________________________
Serial #: ______________________________
Purchased Date: _______________________
PLEASE FILL BELOW FOR YOUR INFORMATION:
QUESTIONS REGARDING YOUR WHEELCHAIR?
POWER PLUS MOBILITY INC. Rev.2
POWERPLUSMOBILITY.COM
Contents
Warranty Informaon 1
Wheelchair Specicaons 2
Maintainance Guiude 3
Cleaning
Lubricaon
Safety and Handling
Maintainance Guide 4
Leaning
Maneuvering Ramps, Curbs, Stairs
Transferring in a Wheelchair
An-Tippers 6
ToRemoveAn-Tipper
ToAdjusttheHeight
Foot rest 7
Leg rest 8
Arms 9
Angle Adjustable Back 10
Rear Wheels 11
Casters 12
Wheel Combinaons 13
Tires and Wheel Locks 14
Cylinder Setup for Seat Height 15
Valued Customer,
At Power Plus Mobility we manufacture top quality Canadian Made products. Your
wheelchair should provide you with many years of service, but like any piece of equipment, it
will require proper care and service for it to perform eciently.
However we suggest you regularly inspect your chair, checking for loose fasteners, excess play
and damage. We also strongly recommend that regular maintenance be done by your servicing
dealer.
Please complete your Warranty registration Card and return it to us at Power Plus
Mobility Inc.
Also please read this manual to help understand the proper operaon, safety and maintenance
of your new wheelchair.
Power Plus Mobility guarantees all parts of our wheelchair to be free of defects in
workmanship and materials for a period of two years from the date of purchase. “Wear” items
such as res, tubes, arm-pads and upholsteries are excluded from this warranty. In addion the
frame and cross-braces are guaranteed to be free of defects in workmanship and material (to
the original purchaser) for a period of 5 years.
This warranty is invalid if the chair has been damaged by accident, misuse, neglect, improper
applicaon, unauthorized service repair or the addion of non-factory approved accessories.
Power Plus Mobility will repair or replace defecve parts as required. A return authorizaon
must be obtained and the parts returned to us freight prepaid, within the warranty period.
Labour and freight charges incurred for replacements or repairs are not covered.
LIMITED WARRANTY
1POWER PLUS MOBILITY INC. Rev.2
2
POWERPLUSMOBILITY.COM
Your wheelchair is designed to give you many years of trouble-free use with proper care. Some
servicing can be done at home, but we recommend that periodic maintenance be performed
at your dealer.
Service frequency depends strongly on the type of use and your dealer can best advise you on
the me interval.
CLEANING
All chrome and painted parts can be cleaned with a mild non-abrasive cleaner such as window
cleaner. Stubborn spots or rust can be removed with automove chrome cleaner.
The arms and nylon upholstery should be cleaned with a mild soap and water soluon. Both
should be rinsed well with clean water to remove all soap residues. The molded wheels and
casters should also be cleaned with a mild soap and water soluon.
LUBRICATION
Your wheelchair has been made with low fricon plasc, steel, aluminum and polished chrome
to reduce fricon and wear. However a light use of thin lubricant, such as WD40 or silicone
spray will reduce fricon and wear, making your chair easier to use.
SAFETY AND HANDLING
The safe handling of your chair depends on understanding the purpose and funcon of your
parcular wheelchair model. Recognizing the chairs’ limitaons will increase your condence
level.
CLEANING
LUBRICATION
SAFETY AND HANDLING
3POWER PLUS MOBILITY INC. Rev.2
Power Plus Mobility inc. Maintainance Guide
LEANING
Leaning should be avoided when possible, as this weight transfer will reduce your chair’s
stability. When leaning forward or sideways make sure the casters are turned in the direcon
you are leaning as this will lengthen the wheel base, increasing stability. Also make sure the
wheel locks are engaged, to prevent your chair from rolling.
MANEUVERING RAMPS, CURBS, STAIRS
Lean forward in chair, pung weight over front casters when going up inclines. When going
on descending inclines do so slowly by controlling your speed using the hand-rims and not the
wheel. To mount a curb use the pping method, pull the chair backwards and over the curb. To
descend a curb do your pping and either pull yourself down backwards or roll yourself for-
ward and down very slowly.
It is a denite no-no to use your chair on an escalator, nd the nearest elevator instead. Going
up or down stairs should be done with at least two aendants at all mes.
TRANSFERRING IN A WHEELCHAIR
Aendant assistance is recommended to stabilize the chair and help in liing you, if necessary.
Transfers are best accomplished by following these guidelines:
• Use a chair with detachable or ip back arm.
• Posion your chair as close as possible to the transfer object and engage your wheel locks
to prevent movement.
• Try to transfer to objects of the same height or close to.
LEANING
MANEUVERING RAMPS, CURBS, STAIRS
TRANSFERRING IN A WHEELCHAIR
4
POWERPLUSMOBILITY.COM
Power Plus Mobility inc. Maintenance Guide
5POWER PLUS MOBILITY INC. Rev.2
Your An-Tippers are used to prevent your chair from pping over while in lt. These can be
removed. However, they must never be removed when using chair.
Loosen the bolt (1) and remove it from the frame
Pull on (3) while moving (2) to your desired posion release (3) to lock into place
*Please adjust your An-Tippers to a safe height (maximum 2” from the
ground). Whenever the seat height is adjusted by wheels the An-Tipper
height must be adjusted as well.
1
2
3
4
Power Plus Mobility inc. Anti-tippers
TO REMOVE ANTI-TIPPERS:
TO ADJUST THE ANTI-TIPPER HEIGHT:
6
POWERPLUSMOBILITY.COM
Number Descripon Quanty
1Bolt 1
2 Anti-Tipper Height Adjustment Rod 1
3 Pull and Release Pin 1
4 Anti-Tipper Wheels 2
The foot rest on your chair is designed to swing away and removes easily. To swing away,
remove feet from the footplate (1) and fold foot-plates up. Then push the release handle (2) on
the foot rest locking mechanism. It will swing to the side of your chair, and could then be
removed by liing it straight up and o the locang pins (3). To replace hold foot rest at the
side of your chair, locate onto mounng pins, allowing it to drop all the way in, and then push
forward unl it locks into place.
1
2
3
4
Your leg rest is designed to be removed and replaced the same as your foot rest. However, it is
advisable to remove and replace your leg rest while it is in a down posion. Liing on the
foot-plate raises the leg rest and it will automacally lock at the raised posion.
Locate 1 into 3 and swing into place. This should allow 4 to lock into place with 3. (Make sure
your leg rest is locked into place before using. To remove foot rest, pull release handle 4, swing
leg rest sideways and li leg rest upwards. To raise leg rest move lever 5 and li leg rest. To
lower leg rest, pull 5 ll lowered. To adjust leg length height, remove screw 8 and adjust to
required height.
*For low oor to seat height on chair, shorter leg rest height
extension tube is required.
Number Descripon Quanty
1Foot Plate 2
2 Releasing Handle 2
3 Mounting Pins 4
4 Foot rest Extension Tube 2
7POWER PLUS MOBILITY INC. Rev.2
Power Plus Mobility inc. foot rest
Table of contents
Other Power Plus Mobility Wheelchair manuals
