Pottinger HIT 95 A User manual

/PERATOR@SMANUAL

Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.

).3425#4)/.3&/202/$5#4$%,)6%290AGE

4RANSLATIONOFTHEORIGINAL/PERATING-ANUAL

Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.

.R 99 2161.GB.80I.0

Tedder

HIT 95 A

(Type 2164 : +..01001)

HIT 105 A

(Type 2161 : +..01001)

ALLG./BA SEITE 2 / 0000-GB

Important information concerning Product

Liability.

According to the laws governing product liability, the manufacturer and dealer are obliged to hand the

operating manual to the customer at the time of sale, and to instruct them in the recommended operating,

safety, and maintenance regulations. Conrmation is necessary to prove that the machine and operating

manual have been handed over accordingly.

For this purpose,

- document A is to be signed and sent to Pöttinger,

- document B remains with the dealer supplying the machine,

- and the customer receives document C.

In accordance with the laws of product liability, every farmer is an entrepreneur.

According to the laws of product liability, property damage is damage caused by a machine and not to

it. An excess of Euro 500 is provided for such a liabilioty.

In accordance with the laws of product liability, entrepreneurial property damages are excluded from

the liability.

Attention! Should the customer resell the machine at a later date, the operating manual must be given

to the new owner who must then be instructed in the recommended regulations referred to herein.

GB Dear Farmer

You have just made an excellent choice. Naturally we are very happy

and wish to congratulate you for having chosen Pöttinger. As your

agricultural partner, we offer you quality and efciency combined with

reliable servicing.

In order to assess the spare-parts demand for our agricultural machines

and to take these demands into consideration when developing new

machines, we would ask you to provide us with some details.

Furthermore, we will also be able to inform you of new developments.

Dokument D

GB-0600 Dokum D Anbaugeräte - 3 -

ALOIS PÖTTINGER Maschinenfabrik GmbH

A-4710 Grieskirchen

Tel. (07248) 600 -0

Telefax (07248) 600-511

GEBR. PÖTTINGER GMBH

D-86899 Landsberg/Lech, Spöttinger-Straße 24

Telefon (0 81 91) 92 99-111 / 112

Telefax (0 81 91) 92 99-188

GEBR. PÖTTINGER GMBH

Servicezentrum

D-86899 Landsberg/Lech, Spöttinger-Straße 24

Telefon (0 81 91) 92 99-130 / 231

Telefax (0 81 91) 59 656

Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating

devices at hand.

Operation and maintenance of machine and/or implement according to operating instructions explained to the customer.

Tyres checked re. correct pressure.

Wheel nuts checked re. tightness.

Drive shaft cut to correct lenght.

Correct power-take-off speed indicated.

Fitting to tractor carried out: to three-point linkage

Trial run carried out and no defects found.

Functions explained during trial run.

Pivoting in transporting and operating position explained.

Information given re. optional extras.

Absolute need to read the operating manual indicated.

Please check. X

According to the product liability please check the above mentioned items.

INSTRUCTIONS FOR

PRODUCT DELIVERY

In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.

For this purpose please do the following:

- sign the document A and send it to the company Pöttinger

(in case of Landsberg equipment: to the company Landsberg)

- document B stays with the specialist factory delivering the machine.

- document C stays with the customer.

- 4 -

0800-GB-INHALT_2161

TABLE OF CONTENTS

CE sign

Recommendations

for work safety

All points refering

to safety in this

manual are

indicated by this

sign.

Meaning of warning signs

The CE sign, which is affixed by the manufacturer, indicates outwardly that this machine

conforms to the engineering guideline regulations and the other relevant EU guidelines.

EU Declaration of ConformityBy signing the EU Declaration of Conformity, the manufacturer

declares that the machine being brought into service complies with all relevant safety and

health requirements.

Do not enter rotor area while driving

motor is running.

Never reach into the crushing danger

area as long as parts may move.

Stay clear of swinging area of

implements.

495.173

Table of contents

CE sign ...................................................................... 4

Meaning of warning signs.......................................... 4

ATTACHING TO THE TRACTOR

Attachment to tractor ................................................ 5

Hydraulic connection................................................. 5

Drive shaft.................................................................. 5

Lowering.................................................................... 6

WORKING- AND TRANSPORTPOSITION

Conversion from working to transport position (from

2007 model)............................................................... 7

Conversion from transport to working position (from

2007 model)............................................................... 8

Conversion from working to transport position (up to

2006 model)............................................................... 9

Conversion from transport to working position (up to

2006 model)............................................................. 10

Driving on public roads............................................ 11

OPERATION

General guidelines for working with the machine.... 12

Hydraulic control device (ST)................................... 12

Raising front rotary units.......................................... 12

Adjustment of rotor inclination ................................ 13

Adjustment of tines.................................................. 13

Setting the feeler wheel ........................................... 13

Adjustment of trailing wheels .................................. 13

Trap sheet 1) ............................................................ 14

ADJUSTMENTS

Adjustments before operation ................................. 15

Adjusting inclination angle of rotary units................ 15

MAINTENANCE

Safety point ............................................................. 18

General maintenance hints...................................... 18

Cleaning of machine parts....................................... 18

Parking in the ope.................................................... 18

Winter storage ......................................................... 18

Drive shafts.............................................................. 18

Hydraulic unit........................................................... 18

Maintenance and repair........................................... 19

Lubrication points.................................................... 19

Intake transmission ................................................. 19

Changing tines......................................................... 20

Tine adjustment ....................................................... 20

TECHNICAL DATA

Tecnical Data ........................................................... 21

Position of Vehicle Identification Plate .................... 21

The defined use of the rotary tedder ....................... 21

SUPPLEMENT

Recommendations for work safety ......................... 24

Driveshaft................................................................. 25

Lubrication chart...................................................... 28

Lubricants................................................................ 29

Hydraulicplain.......................................................... 31

- 5 -

0600_GB-Anbau_2162

Safet hints:

see supplement-A1

points (8a. - 8i.)

1) Only necessary when used with optional extras

Drive shaft

Before operation, check lengths of drive shafts and adapt

if necessary (see chapter "Adaption of Drive Shaft" in

supplement B also).

Hydraulic connection

There must be at least a double-action hydraulic

connection available on the tractor.

Connecting hydraulic system to the tractor

- Only connect hydraulic system to the tractor when

stopcock is closed (position A).

EW1) Connect the plug-in connection with the ”red” dust

cap to the single action control valve.

DW Connect both plug-in connections with the ”blue”

dust caps to the double action control valve.

TD44/94/1

TD 26/92/16

Attachment to tractor

1. Attach shaft to tractor´s linkage drawbar.

Important!

The tractor linkage drawbar must be movable (A-B)

- Left and right lifting struts (4) must be of equal

length.

2. Secure fixing bolts using linch pin (V).

3. Fix the hydraulic lower link (5) in such a way that

the machine cannot swing out sideways.

4. Raise jackstand (10) and secure with bolt.

Up to 2005 model

From 2006 model

Important!

Always connect

wide angle joint

to tractor, not to

machine! 1)

AttAching to the trActor

- 6 -

0600_GB-Abstellen_2162

Lowering the mAchine

- Close stopcock on every connector (pos. A) and then

disconnect hydraulic lines from tractor.

- Disconnect appliance from tractor.

Attention!

Whenparkingmachineinworkingposition,

ensure stability (tipping).

Should problems occur when disconnecting:

- Move servo-valve (ST) briefly to "lower" position (s).

Doing this will reduce any possible pressure remaining

intheconnectorandallowsatrouble-freedisconnection

of the hydraulic lines.

Themachinecanbeloweredbothfromtheworkingposition

and from the transport position.

- Park machine stabily!

- Secure implement from rolling using wheel

chocks!

- Swing support stand down (5a)

- secure with locking pin (B)

Up to 2005 model

From 2006 model

- Pull off drive shaft and rest on support.

Do not rest drive shaft on safety chain!

Attention!

Park machine

stabily!

Secure implement

from rolling!

Lowering

TD 26/92/16

Pos. E

Pos. A

- 7 -

0701_GB-Arbeitsstellung_2162

working- And trAnsportposition

Conversion from working to transport position (from 2007 model)

Attention!

Safet hints: see

supplement -A1

points (8a. - 8i.)

Changing from

working position

to transport

position is only to

be carried out on

even, firm ground.

The tractor must

be standing still

or travelling

slowly forwards.

Tractor must not

be under brakes

during swivelling

procedure.

TD44/94/8

Note!

Trailing wheels (N)

set themselves in

correct position

only after travel

begins.

Attention!

Drive must not

be switched on

when in transport

position!

- risk of damage

Turn drive off!

Swivelling procedure:

1. Extend drawbar cylinder (1) until frame is standing

approx. horizontal

2. Begin swivelling procedure

Make sure that swivel area is free and that nobody is

standing in the danger area.

- Pull valve lever (3) forward using rope

- Use double action control valve (ST)

- Move tractor slowly forward

- Swivel rotary units completely in

Note!

Operate control valve (ST) until

- the hydraulic wheels (H) are completely turned

out

or (for machines with feeler wheels 1))

- all feeler wheels are folded up

3. Release the rope

Note!

Move hydraulic control valve (ST) into float

position when transporting

- 8 -

0701_GB-Arbeitsstellung_2162

working- And trAnsportposition

Changing from working position to

transport position is only to be carried out

on even, firm ground.

The tractor must be standing still or

travelling slowly forwards.

Note!

Do not swivel to contour line!

Fold feeler wheel (T) down

Attention!

Stand clear of

implement‘s

swivel range.

Tractor must not

be under brakes

during swivelling

procedure.

Conversion from transport to working position (from 2007 model)

Swivelling procedure:

1. Extend drawbar cylinder (1) out (1 cm)

- Hinged bracket (2) is released

2. Begin swivelling procedure

Make sure that swivel area is free and that nobody is

standing in the danger area.

- Pull valve lever (3) forward using rope

- Use double action control valve (ST)

- Swivel rotary units out into working position.

Note!

Operate control valve (ST) until the machine

is completely swivelled out. Carry out this

procedure in one constant operation

3. Release the rope

- 9 -

0701_GB-Arbeitsstellung_2162

working- And trAnsportposition

Activate control valve (ST) until

- hydraulic wheels (H) are completely turned out

For machines with feeler wheels 1)

- all feeler wheels are folded up.

Attention!

Trailingwheels(N)setthemselvesincorrect

position only after travel begins.

Attention!

Tractor must not be under brakes during

swivelling procedure.

Attention!

Drive must not be switched on when in

transport position!

- risk of damage!

Turn drive off!

1. Drive tractor forward

- all wheels must be trailing (H).

2. Make sure that swivel area is free and that nobody is

standing in the danger area.

3. Swivel rotary unit to the rear.

Use double action control valve (ST)

4. Close stop valves (position A)

For safety, travel on roads only with stop valves

closed!

TD44/94/8

Conversion from working to transport position (up to 2006 model)

Attention!

Safet hints: see

supplement -A1

points (8a. - 8i.)

Changing from

working position

to transport

position is only to

be carried out on

even, firm ground.

The tractor must

be standing still

or travelling

slowly forwards.

- 10 -

0701_GB-Arbeitsstellung_2162

working- And trAnsportposition

Attention!

Stand clear of

implement‘s

swivel range.

Conversion from transport to working position (up to 2006 model)

Attention!

Tractor must not be under brakes during

swivelling procedure.

• Changing from working position to

transportpositionisonlyto becarried

out on even, firm ground.

The tractor must be standing still or

travelling slowly forwards.

Note!

Do not swivel to contour line!

1. Open stop valve (pos. E)

2. Fold feeler wheel (T) down

TD44/94/8

Pos. E

Pos. A

3. Make sure that swivel area is free and that

nobody is standing in the danger area.

4. Swivel rotary units out into working position.

• Use double action control valve (ST)

5. Close stop valves (position A)

This manual suits for next models

Table of contents

Other Pottinger Tedder manuals

Pottinger

Pottinger HIT 58 N User manual

Popular Tedder manuals by other brands

SIP

SIP SPIDER 815/8 HS Instruction for work

Kongskilde

Kongskilde Z 555 HYDRO Operator's manual

SIP

SIP STAR 720/22 T Mounting instructions

Bush Hog

Bush Hog HT417 Operator's manual

SaMASZ

SaMASZ P4-471 C Operator's manual

SaMASZ

SaMASZ P10-1200 Operator's manual

Bush Hog

Bush Hog HT419H Operator's manual

SIP

SIP SPIDER 300 Instruction for work

SIP

SIP SPIDER 815/8 Instruction for work

Kongskilde

Kongskilde Z 455 HYDRO Operator's manual

SaMASZ

SaMASZ P4-471 Operator's manual

Krone

Krone KWT 7.70/6x7 operating instructions

Kongskilde

Kongskilde Z 665 H Operator's manual

Tar River

Tar River PRZ-5500 User Manual, Spare Parts Catalog, Warranty

SIP

SIP SPIDER 815/8 T Instruction for work

Kuhns mfg

Kuhns mfg AF8 owner's manual

Kongskilde

Kongskilde Z 455 H Operator's manual

sitrex

sitrex ST 780 H Assembly, use and maintenance