Postium HLB-4K Quick start guide
HLB-4K
High Dynamic Range LUT BOX-4K
HDR Converter
Operational Instructions
User Manual Ver 19.1
1
High Dynamic Range LUT BOX-4K
HLB-4K
Table of Contents
1. Precaution...................................................2
2. Location and Function of Controls.............4
3. Menu Organization......................................8
4. Menu Adjustment........................................9
5. Menu Operations.......................................10
6. Available Signal Formats..........................14
7. Specifications............................................15
8. Dimensions................................................16
2
High Dynamic Range LUT BOX-4K
HLB-4K
1. Precaution
Always use set voltage.
DC 12V
All these instrucons should be read and understood before operang the unit.
If liquid is spilled on or impacts this product, please disconnect the product immediately and seek profession-
al help before connued use.
Unplug the product from the wall outlet if it is not to be used for several days or more.
Keep the product in a well-venlated place to prevent overheang.
Do not install the product near any heat-generang equipment. Also, keep the product out of direct sunlight
or dusty areas.
Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
When using other DC 12V adapters instead of the standard adapter provided by the manufacturer, please
check the proper load capacity or current capacity and use an adapter with stable voltage.
Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
3
High Dynamic Range LUT BOX-4K
HLB-4K
Do not aempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous condions. Request a qualified service person to perform servicing.
When the product needs replacement parts, make sure that the service person uses replacement parts
specified by the manufacturer, or those with the same characteriscs and performance as the original parts.
Use of unauthorized parts may result in fire, electric shock and/or other danger.
Only clean the product with a noncommercial, mild and neutral detergent.
Do not throw away the carton and packing materials. When transporng the product, make use of its original
packaging for safer carriage.
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instrucon manual, may cause harmful interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning!! : Changes or modificaons not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries
with separate collecon systems)
This symbol on the product or on its packing indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collecon point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potenal negave consequence for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The recycling of materials will help to
conserve natural resources.
!
4
High Dynamic Range LUT BOX-4K
HLB-4K
2. Location and Function of Controls
Front Panel
A : Input Selection Buttons
Press the buon to select the signal input.
[HDMI]
- Press the buon to select HDMI input.
[SFP SINGLE]
- Press the buon to select one channel of SFP input. The SFP Module should be connected to the
SFP 1 Connector.
[SFP DUAL]
- Press the buon to select SFP Dual-Link.
[SDI SINGLE]
- Press the buon to select one channel of the SDI input. The mode changes in the order of
SDI 1, SDI 2, SDI 3, SDI 4.
[SDI D-2S.I]
- Press the buon to select the SDI Dual-Link 2-Sample Interleave mode. The input cables should
be connected to the SDI 1 and SDI 2 Connectors.
[SDI Q-2S.I]
- Press the buon to select the SDI Quad-Link 2-Sample Interleave mode.
[SDI SQUARE]
- Press the buon to select the SDI Quad-Link Square Division mode.
B : Output Selection Buttons
[SDI SINGLE]
- Press the buon to select one channel of the SDI. The mode changes in the order of SDI 1, SDI 2,
SDI 3, SDI 4.
[SDI D-2S.I]
- Press the buon to select the SDI Dual-Link 2-Sample Interleave mode. The input cables should
be connected to the SDI 1 and SDI 2 Connectors.
[SDI Q-2S.I]
- Press the buon to select the SDI Quad-Link 2-Sample Interleave mode.
[SDI SQUARE]
- Press the buon to select the SDI Quad-Link Square Division mode.
A
B
5
High Dynamic Range LUT BOX-4K
HLB-4K
C : F1 ~ F3 Button
Press to adjust or turn on/off the assigned funcon.
The following funcons are assigned at the factory.
[F1] : Conversion Mode
[F2] : Input Color
[F3] : User LUT
D : Rotary Encoder
[SEL] knob
When the Menu is displayed, turn this knob le or right to move up or down the menu and press
this knob to confirm the selected seng.
E : Menu Button
[MENU]
Acvates or deacvates the display of the Main Menu.
F : Power Button
[POWER]
Press to turn on or off the power.
G : USB connector
[USB] Connector
- Used to update the firmware.
- If you insert the USB memory sck with the firmware file and turn on the power,
the firmware update is done.
H : LCD Module
[LCD] TFT LCD
- Displays the OSD Menu and the current seng values on the LCD screen.
EF
CHDG
7
High Dynamic Range LUT BOX-4K
HLB-4K
A : SDI IN (SDI Input) connectors (BNC)
Used to input the SDI signal.
B : SDI OUT (SDI Output) connectors (BNC)
Used to output the SDI signal.
C : HDMI input connectors
Used to input the HDMI signal.
- High Speed HDMI Cable with the cable type logo or HDMI 2.0 Cable is recommended.
- When inpung 4K resoluon(3840 x 2160 or 4096 x 2160) signal, use a cable of 3m or less.
D : SFP Input connector
Used to input the SFP module.
E : Monitoring OUT
Will be supported.
F : LAN
Will be supported.
G : Remote
Will be supported.
H : DC 12V IN terminal
Connects the DC power supply.
DC IN Socket
1 : GND
4 : +12V
4
12
3
Rear Panel
EF CG
BADH
8
High Dynamic Range LUT BOX-4K
HLB-4K
3. Menu Organization
The LCD module displays the status informaon as follows.
A : Displays the input signal.
The input port which is currently connected is displayed as an icon.
B : Displays the output signal.
The output port which is currently connected is displayed as an icon.
C : Displays the conversion data which is currently applied.
This unit is equipped with an OSD menu to make various adjustments and sengs.
2
2. Color Conversion
3. Function Key
4. System
5. Information
1. Format
A
B
A : The menu currently selected is highlighted green.
B : Other menu list
A
B
C
NO SIGNAL
NO SIGNAL
B T .709
B T .2020
9
High Dynamic Range LUT BOX-4K
HLB-4K
4. Menu Adjustment
1. Enter the menu
When the MENU buon is pressed,
the OSD menu is displayed.
2
2. Color Conversion
3. Function Key
4. System
5. Information
1. Format
2. Enter the submenu
Turn the SEL knob le or right to choose the menu.
Push the SEL knob to enter the submenu.
The menu presently selected is shown in green.
3G L evel
H D M I Color
F O R MAT
3. Select an item
Turn the SEL knob to select an item, and push the knob to
change the item.
When an item is changed, the check mark is displayed
to the item.
RG B(Full)
RG B(Limit)
YCbCr
√ A uto
H D M I COLOR
4. Previous Menu
Press the MENU buon to return to the previous menu.
10
High Dynamic Range LUT BOX-4K
HLB-4K
5. Menu Operations
1.Format
* HDMI Color
Adjusts the color of the HDMI input.
- Auto : Reads the HDMI color characteriscs and adjusts the
color automacally.
- RGB(Full) : Sets the HDMI color to RGB(Full).
- RGB(Limit) : Sets the HDMI color to RGB(Limit).
- YCbCr : Sets the HDMI color to YCbCr.
* 3G Level
Adjusts the 3G Level type of the SDI input signal.
- Auto : Sets the SDI 3G Level automacally.
- A 444 YUV 10b : Sets the Level A 4:4:4 YCbCr 10bit type.
- A 444 GBR 10b : Sets the Level A 4:4:4 GBR 10bit type.
- A 444 YUV 12b : Sets the Level A 4:4:4 YCbCr 12bit type.
- A 444 GBR 12b : Sets the Level A 4:4:4 GBR 12bit type.
- A 422 YUV 12b : Sets the Level A 4:2:2 YCbCr 12bit type.
- B 444 YUV 10/12b : Sets the Level B 4:4:4 YCbCr 10/12bit type.
- B 444 GBR 10/12b : Sets the Level B 4:4:4 GBR 10/12bit type.
- B 422 YUV 12b : Sets the Level B 4:2:2 YCbCr 12bit type.
- B 422 YUV 10b 60p : Sets the Level B 4:2:2 YCbCr 10bit 60p type.
2. Color Conversion
* Mode
Makes the sengs related to the color conversion.
- OFF
Selects OFF to not convert the color.
- HDR/SDR Conv.
Selects this mode to convert HDR to SDR or SDR to HDR.
- Extern. LUT
Selects this mode to use the external 3D LUT.
- Color
Selects this mode to convert BT.709 to BT.2020 or
BT.2020 to BT.709.
R
RG B(Full)
RG B(Limit)
YCbCr
√ A uto
H D M I COLOR
RG B(Full)
RG B(Limit)
YCbCr
√ A uto
H D M I COLOR
H D R/SDR Conv
Extern. LUT
Color
√ O FF
MO DE
OFF
HDR/SDR
Extern. LUT
Color
Output SignalInput Signal
Table of contents
