POSIFLEX XT-5315 User manual
Package Contents
15” P-CAP touch terminal with Gen 7E or
Gen 8E base (x 1)
Power adapter (x 1)
Power cord (x 1)
User manual (x 1)
Product Features
Fanless Design
Intel 4th generation Haswell CPU
New Gen 7E foldable base that allows JIVA XT Series to be configured
into different configurations.
New Gen 8E foldable base that integrates internal power adaptor and
Powered USB port into the base.
Mini-PCIe expansion slot
16760900020 Ver. A0
http://www.posiflex.com
XT-5315/5515/5515Pro
P-CAP Touch Terminal
User Manual
1
Views of XT-5315/5515/5515Pro with Gen 7E Base
Front View
Rear View
Side View
Cable Cover
Neck Cover
HDD Cover
Cable Exit
XT-5315/5515/5515Pro
P-CAP Touch Panel
LED indicator
Power Button
Brightness Adjustment Button
＋
Brightness Adjustment Button －
Gen 7E Base
2
Bottom View
Views of XT-5315/5515/5515Pro with Gen 8E Base
Front View
Rear View
Cable Holder
Cable Exit
XT-5315/5515 /5515Pro
P-CAP Touch Panel
HDD Cover
Cable Cover
Neck Cover
Cable Exit
LED indicator
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
Gen 8E Base
3
Side View
Bottom View
View of I/O Interface of XT-5315/5515
Rubber Feet with Fixing Screw
Line Out/MIC-In
Combo Jack
USB 2.0
Ports
USB 3.0
Ports
DB9 COM Ports
VGA Port
CR Port
LAN Ports
12V BAT Port
DC IN
Power
Connector
Rubber Feet with Fixing Screw
RJ-50 COM Ports
UPS Battery
Compartment
Power Adapter
Compartment
PoweredUSB
Compartment
HD Compartment
Power Button
Brightness Adjustment Button
＋
Brightness Adjustment Button －
4
View of I/O Interface of XT-5515Pro
Positioning your POS for a Perfect Viewing Angle
The adjustable bases designed for XT-5315/5515/5515Pro come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal
using its unique tilt adjustment mechanism. As the below figures suggest, both
bases provide three standard positioning solutions for your terminal: Flat
Folded mode, Low Profile mode, and Full Extended mode.
XT-3515/5515/5515Pro with Gen 7E Base
Flat Folded mode
Low Profile mode
Full Extended mode
XT-3515/5515/5515Pro with Gen 8E Base
Flat Folded mode
Low Profile mode
Full Extended mode
Line Out/MIC-In
Combo Jack
USB 3.0
Ports
DB9 COM Ports
VGA Port
CR Port
LAN Port
12V BAT Port
DC IN
Power
Connector
RJ-50 COM Ports
HDMI Port
5
In general, XT-5315/5515/5515Pro will be set up beforehand in Flat Folded
mode and then packaged into the box for shipping. After it is unpacked, you
may re-adjust the terminal in either Low Profile mode or Full Extended mode
according to your situation. Below will provide instructions on how to adjust
the specific base connected to the POS system. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle.
XT-3515/5515/5515Pro with Gen 7E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-5315/5515/5515Pro
with Gen 7E base.
1. Unpack XT-5315/5515/5515Pro, which is
supposed to be set in flat folded mode, out of
the package box and then lay your POS
system on a flat surface.
2. Steady the base with one hand, and then tilt
the screen downwards.
3. Position your terminal in Full Extended mode
3.1 After grabbing the bottom edge of the screen with your hand, gently
move the screen upward until the screen is locked into place with a
click sound.
3.2 With the screen facing toward you, tilt the
screen up or down to your desired angle.
Please do not press on the LCD panel while
setting up the tilt angle.
6
4. Return your terminal back to Flat Folded mode from Full Extended
mode.
4.1 Tilt your screen in a horizontal position. Then, remove the cable
cover from the base.
4.2 Support the screen with one hand holding onto its bottom edge.
While pulling the lever backwards, move the display downwards
until the lever is lifted off the hook as shown in the figure
4.3 Push the cable cover back.
4.4 Tilt the screen again to the horizontal
position.
Hook
Lever
7
5. Position the terminal in Low Profile mode.
5.1 Follow Step 4 to set up the termimal in Flat
Folded mode.
5.2 Tilt the screen all the way down
5.3 To tilt screen up or down to your desired
angle, please be advised to keep the base
steady with one hand to do so. Do NOT
press on the LCD panel while setting up the
tilt angle.
XT-5315/5515/5515Pro with Gen 8E Base
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-5315/5515/5515Pro
with Gen 8E base.
1. Unpack XT-5315/5515/5515Pro, which is
supposed to be set in flat folded mode, out
of the package box and then lay your POS
system on a flat surface.
2. While steadying the terminal with your
hand holding onto the base, tilt the screen
down.
8
3. Push the cable cover outwards to remove
it from the base.
4. Position your terminal in Full Extended mode.
4.1 Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
until the lever is snapped into the lower hook to raise the screen as
shown in the below figure.
4.2 Push the cable cover back.
4.3 Tilt the screen up or down to your
desired angle. Please do not press on
the LCD panel while setting up the tilt
angle.
Lower
hook
Lever
9
5. Position the terminal in Low Profile mode.
5.1 While keeping your terminal steady with your hand holding on to
the base, tilt your terminal down. Then, remove the cable cover
from the base.
5.2 Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display
upwards or downwards until the lever is snapped into the upper
hook to lower the screen as shown in the below figure.
5.3 Push the cable cover back.
5.4 Tilt the screen up or down to your
desired angle. Please do not press on
the LCD panel while setting up the
tilt angle.
Lever
Upper
hook
10
This manual suits for next models
2
Table of contents
Other POSIFLEX Touch Terminal manuals
POSIFLEX
POSIFLEX Jiva KS-6215 Series User manual
POSIFLEX
POSIFLEX Jiva LT - 8300 User manual
POSIFLEX
POSIFLEX KV-2000 Series User manual
POSIFLEX
POSIFLEX Jiva TP-5815 Pro series User manual
POSIFLEX
POSIFLEX KS - 6810 User manual
POSIFLEX
POSIFLEX XP-3000 Series User manual
POSIFLEX
POSIFLEX HC-1621IR User manual
POSIFLEX
POSIFLEX TX-2000 User manual
POSIFLEX
POSIFLEX XP-2000 Series User manual
POSIFLEX
POSIFLEX KS - 6915 User manual
POSIFLEX
POSIFLEX MT-4308W Series User manual
POSIFLEX
POSIFLEX RT-2015-G2 User manual
POSIFLEX
POSIFLEX KS-7410 User manual
POSIFLEX
POSIFLEX KS - 7210 series User manual
POSIFLEX
POSIFLEX HT-2212 Pro Series User manual
POSIFLEX
POSIFLEX FT-6315 User manual
POSIFLEX
POSIFLEX Jiva LT-5600 User manual
POSIFLEX
POSIFLEX HT-3200 SERIES User manual
POSIFLEX
POSIFLEX Jiva LT 8015 User manual
POSIFLEX
POSIFLEX HS-35 W-G2 Series User manual
