POSIFLEX SD-430 User manual

SD-430 (Fingerprint Reader)

Package Contents

SD-430 Side Attachment…………………….(1)

Fixing Screw (#6/32-12L)...............................(2)

User Manual…………………………………(1)

Views of the SD-430

Front View Left Side View

SD-430

Side Attachment for KS-7410 Terminal

User Manual

19800903010 Ver. A0

http://www.posiflex.com

Fingerprint Sensor

Screw Hole

USB I/O Connector

Installing SD-430 to KS-7410 Terminal

Please go through the following instructions to finish installation of

SD-430. Also, ensure your KS-7410 terminal is properly shut down during

installation.

1. Use a screwdriver to loosen and remove the two fixing screws from the

side mount cover on the back of the left side of your KS-7410 terminal.

Remove the side mount cover from the back of the left side of the terminal.

2. Pull the I/O cable out of the attachment bay of the back of the left side of

the terminal.

3. Connect the side attachment I/O cable of the terminal to the USB I/O

connector of the SD-430.

4. Tuck excess cables inside the attachment bay of the terminal.

5. Align the two screw holes of the SD-430 cover with the two screw holes on

the attachment bay of the terminal.

6. Secure the SD-430 onto the terminal with two fixing screws.

7. The installation of SD-430 onto the terminal is completed,

as shown in the right figure.

Driver/Utility Installation and Utility Outline

Before installing the driver of the SD-430, after installing the SD-430

attachment, power on your KS-7410 terminal.

Installing the Fingerprint Driver

1. Please visit Posiflex official website (http://www.posiflex.com/en-

global/Download/download) to download the fingerprint driver.

2. Then, follow the step-by-step instructive messages to complete the

driver installation.

3. After completion of the driver installation, restart your terminal.

Using the SD-430

After installing the fingerprint driver, you can start to operate the SD-430.

Fingerprint Sensor

Keep your thumb close to the fingerprint reading area

to allow the fingerprint sensor to read your thumb

fingerprint.

Reading Area

Specification

Finger Print Sensor Technology

Active capacitive technology

Interface

USB

※

The product information and specifications are subject to change

without prior notice. To get the detailed information on SD-430, please

check this model from Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download).

<MEMO>

Other POSIFLEX Rack & Stand manuals

POSIFLEX

POSIFLEX PP7000 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 