Portfolio 16025 User manual

Portfolio® is a registered trademark

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

Français p. 8

Español p. 15

ITEM #0216892

MODEL #16025

4-HEAD TRACK LIGHT

PACKAGE CONTENTS

Outlet Box

(Not Included)

Part Description Quantity

A Canopy 1

Threaded Socket (Preassembled to Arm (E)) 4

Threaded Socket Ring (Preassembled to Threaded Socket (B)) 4

Glass Shade 4

Arm (Preassembled to Canopy (A)) 1

GU10 Bulb 4

Support Ring 4

HARDWARE CONTENTS

Quantity

Picture

(Shown to size)

Wire

Connectors 2

Part

Threaded

Knobs 2

Long

Machine

Screws

Description

Short

Machine

Screws

2BB

Quantity

Picture

(Not shown to size)

Part

Description

Mounting

Bracket

Ground

Screw 1(Not Shown

to size)

Wrench 1

(Not Shown to size)

GND

WARNINGS AND CAUTIONS

WARNING:

• IMPORTANT: NEVER attempt any work without shutting off the electricity.

• Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the

"OFF" position.

• Unscrew the fuse(s), or switch "OFF" the circuit breaker switch(es), that control the power to the

fixture or room that you are working on.

• Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,

place those in the "OFF" position.

• Do not use bulbs with wattage greater than specified on this fixture.

• WARNING: California Prop 65: This lighting fixture contains chemicals known to the state of

california to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.

CAUTION:

• Read and understand all instructions and illustrations completely before proceeding with assembly

and installation of this fixture.

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate

completely, please contact a qualified licensed electrical contractor.

• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts

out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate

the ETL listing and / or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list. If any part is missing or damaged, do not attempt to assemble the product. Contact

customer service for replacement parts.

Estimated assembly time: 30 minutes to 1 hour.

Tools Required for Assembly: Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape

(not included).

ASSEMBLY INSTRUCTIONS

1. Connect the mounting bracket (EE), with

short machine screws (BB), to the outlet box.

Orient the mounting bracket (EE) so that the

raised center portion protrudes into the outlet

box. (See Fig. 1.)

2. Remove threaded socket ring (C) from threaded

socket (B) with wrench (GG). Place glass

shade (D) over threaded socket (B), insert

support ring (G), and secure with threaded

socket ring (C) with wrench (GG). (See Fig. 2.)

Fig. 1

Fig. 2

Short Machine

Screws x 2

x 1

EE Mounting

Bracket

x 1

GG Wrench

Hardware Used

Outlet Box

(Not Included)

GND

ASSEMBLY INSTRUCTIONS

GND

3. Twist lock GU10 bulbs (F) into threaded socket (B).

(See Fig. 3.)

4. Wire connection guide (See Fig. 4.):

a.) Ground wire:

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (FF) on mounting bracket (EE),

no less than 2 in. from wire end. Tighten

ground screw (FF). If fixture is supplied with

a ground wire, connect to outlet ground wire

with an extra wire connector (not included).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (FF) on

mounting bracket (EE). Tighten ground

screw (FF).

b.) Supply wire:

Make wire connections, with wire

connectors (AA), following the

reference chart listed below.

*NOTE:

When parallel wire (SPT I & SPT II) is used.

The neutral wire is square shaped and ridged

and the hot wire will be round in shape and

smooth. (See Fig. 5.)

Fig. 5

CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor. Insulated Wire (not green) with Silver metal conductor.

Fig. 4

EE Mounting

Bracket

Ground

Screw

Hardware Used

Wire Connectors

GND

Fig. 3

x 2

x 1

CARE AND MAINTENANCE

TROUBLESHOOTING

• Always be certain that electric current is turned off before cleaning.

• Use a soft, moist cloth with mild nonabrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

Fig. 6

Threaded

Knobs x 2

x 2

Long

Machine

Screws

Problem Possible Cause Corrective Action

Fixture does not light. 1. Fixture may be wired incorrectly. 1. Check wiring.

2. Worn or broken bulb. 2. Replace bulb.

x 1

EE Mounting

Bracket

5. Pass the canopy (A) over the long machine

screws (DD) protruding from the mounting

bracket (EE) and secure in place with threaded

knobs (CC). (See Fig. 6.)

ASSEMBLY INSTRUCTIONS

Hardware Used

GND

WARRANTY

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST,

Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.

Printed in China

Distributor warrants products manufactured by it will be free from defects in material and

workmanship for one (1) year following the date of shipment. This warranty does not cover bulbs

or finish on outdoor product. If any of the warranted products are found by Distributor to be

defective, such products will, at Distributor’s option, be replaced or repaired at Distributor’s cost.

The parties hereto expressly agree that Buyer’s sole and exclusive remedy against the Distributor

shall be for the repair or replacement of defective products as provided herein, or, at the

Distributor’s sole option, Distributor may refund the purchase price of the products. THE

FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR

INFRINGEMENT. No affirmation of Distributor, by words or action, other than set forth in this

paragraph shall constitute a warranty. Goods which may by sold by Distributor but which are not

manufactured by Distributor are not warranted by Distributor, but are sold only with the warranties,

if any, of the manufacturer thereof. This warranty does not cover labor or other costs or expenses

to remove or install any defective, repaired or replaced product. Distributor’s warranty does not

apply to any products that have been subjected to misuse, mishandling, misapplication, neglect

(including, but not limited to improper maintenance), accident, improper installation, modification

(including, but not limited to use of unauthorized parts or attachments), or adjustment or repair.

Part Description Part #

EE & FF

GG DD

Threaded Socket Ring LR038

Glass Shade G353

GU10 Bulb B017

Short Machine Screws SCR832X050

Threaded Knobs FIN-16027

Long Machine Screws SCR832X100

Mounting Bracket (EE)

w/Ground Screw (FF) XBAR05

Wrench W008

Rev. 11-14-17

ARTICLE #0216892

MODÈLE #16025

RAIL D’ÉCLAIRAGE

À QUATRE PROJECTEURS

Portfolio® est une marque de commerce

Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au

détaillant, appelez notre service à la clientèle au 1 800 643-0067, entre 8 h et 18 h (HNE),

du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.

Pièce Description Quantité

A Socle 1

Douille filetée (préassemblée au bras (E)) 4

Bague de douille filetée (préassemblée à la douille filetée (B)) 4

Abat-jour en verre 4

Bras (préassemblée au socle (A)) 1

Ampoule GU10 4

Bague de soutien 4

CONTENU DE L’EMBALLAGE

Boîte de sortie

(non comprise)

GND

EE 1

Clé 1

QUINCAILLERIE INCLUSE

Quantité Illustration

(grandeur réelle)

Pièce Description Quantité Illustration

(dimensions non réelles)

Pièce Description

Capuchons

de connexion

Boutons

filetés

Support

de montage

Vis de

mise à

la terre

Vis à

métaux

courtes

Vis à

métaux

longues

(dimensions

non réelles)

(dimensions

non réelles)

AVERTISSEMENTS ET MISES EN GARDE

AVERTISSEMENT :

• IMPORTANT : Avant toute manipulation, coupez TOUJOURS l’électricité et attendez d’avoir terminé

avant de remettre le courant.

• Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur

principal en position d’arrêt (« OFF »).

• Dévissez les fusibles ou placez en position d’arrêt (« OFF ») l’interrupteur des disjoncteurs qui

alimentent le luminaire ou la pièce dans laquelle vous travaillez.

• Placez l’interrupteur mural en position d’arrêt (« OFF »). Si le luminaire à remplacer est doté d’un

interrupteur à bouton ou à chaîne, placez-le en position d’arrêt (« OFF »).

• N’utilisez pas d’ampoules dont la puissance dépasse la puissance nominale indiquée sur ce luminaire.

• AVERTISSEMENT EN VERTU DE LA PROPOSITION 65 DE LA CALIFORNIE : Ce luminaire

contient des produits chimiques reconnus par l’État de la Californie comme étant la cause de cancers,

d’anomalies congénitales et d’autres problèmes liés aux fonctions reproductrices. Lavez-vous les

mains après l’avoir manipulé.

MISE EN GARDE :

• Prenez soin de lire et de comprendre toutes les instructions avant de commencer l’assemblage et

l’installation du luminaire.

• Si vous avez des doutes à propos de l’installation, ou si le luminaire ne fonctionne pas correctement,

veuillez communiquer avec un électricien qualifié.

• Toutes les pièces doivent être utilisées tel qu’il est indiqué dans ces instructions. Ne remplacez

pas les pièces, n'en laissez pas de côté et ne les utilisez pas si elles sont usées ou brisées.

Le non-respect de ces instructions peut annuler l’homologation ETL ou CSA du luminaire.

PRÉPARATION

Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les

pièces dans l'emballage. S'il y a des pièces manquantes ou endommagées, ne tentez pas d'assembler

le produit. Communiquez avec le service à la clientèle pour obtenir des pièces de rechange.

Temps d’assemblage approximatif : de 30 à 60 minutes.

Outils nécessaires pour l’assemblage : tournevis cruciforme, tournevis à tête plate, pinces à dénuder

et ruban isolant (non inclus).

This manual suits for next models

Table of contents

Languages:

Other Portfolio Outdoor Light manuals

Portfolio

Portfolio LWS1204B3 User manual

Portfolio

Portfolio SL26Cb-R5-ORB-2 User manual

Portfolio

Portfolio DL6905RBS User manual

Portfolio

Portfolio 00605 User manual

Portfolio

Portfolio E3A User manual

Portfolio

Portfolio DL6904RBS User manual

Portfolio

Portfolio RS60M-F10-BK-C User manual

Portfolio

Portfolio 00744 User manual

Portfolio

Portfolio RS40Pb-R8-RS-C4 User manual

Portfolio

Portfolio TL05BZ User manual

Portfolio

Portfolio SS39P-P3-BK-C1 User manual

Portfolio

Portfolio MS16Mh-R5-CB-C8 User manual

Portfolio

Portfolio 16073 User manual

Portfolio

Portfolio 00768 User manual

Portfolio

Portfolio RS65M-P2-SS-W2 User manual

Portfolio

Portfolio 00686 User manual

Portfolio

Portfolio DL6906RBS Installation instructions

Portfolio

Portfolio B10065 User manual

Portfolio

Portfolio FY09-002 User manual

Portfolio

Portfolio PL127MBK User manual

Portfolio

Portfolio RD11C-R5-SV-2 User manual

Portfolio

Portfolio 18224 User manual

Portfolio

Portfolio 4193 User manual

Portfolio

Portfolio PL1585 User manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual