POK AQUASTAR User manual

AQUASTAR

High pressure hand nozzle with selectable flow rate

and stream pattern, 180 lpm, spinning teeth

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

MOP_LAM_01403_EN_A - 24/02/2017

User manual

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

AQUASTAR - High pressure hand nozzle with selectable ow rate and stream pattern, 180 lpm, spinning teeth

Identication

DESIGNATION DESCRIPTION

Product type Hand nozzle

Product AQUASTAR, high pressure hand nozzle with selectable

ow rate and stream pattern, 180 lpm, spinning teeth

Product reference concerned by the manual Ref: 39585

N° of documentation MOP_LAM_01403_EN_A

Language English

Creation Date 22/02/2017

Last modication -

Review follow up Rev. A - 22/02/2017:

Original le

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr 3

AQUASTAR - High pressure hand nozzle with selectable ow rate and stream pattern, 180 lpm, spinning teeth AQUASTAR - High pressure hand nozzle with selectable ow rate and stream pattern, 180 lpm, spinning teeth

Table of contents

IDENTIFICATION .......................................................................................................2

TABLE OF CONTENTS .................................................................................................3

WARNING ..................................................................................................................4

• Note .............................................................................................................4

• General Warning.............................................................................................4

• Security ........................................................................................................4

• Introduction...................................................................................................4

• Dismantling and Warranty................................................................................4

• Use ..............................................................................................................5

• Limits of use ..................................................................................................5

TECHNICAL DATA.......................................................................................................6

MAIN VIEW ..........................................................................................................6

OVERALL DIMENSIONS..........................................................................................7

CHARACTERISTICS ...............................................................................................8

• Construction ..................................................................................................8

• Hydraulic Characteristics .................................................................................8

• Mechanical Characteristics ...............................................................................8

1 - General data ...............................................................................................9

2 - Flow chart / pressure curve ...........................................................................9

3 - Mechanical System.......................................................................................9

4 - Prescriptions ............................................................................................. 10

5 - Certied by: ............................................................................................. 10

INSTRUCTIONS FOR USE ......................................................................................... 11

CONTROL AND OPERATING .................................................................................. 11

• Before applying pressure ............................................................................... 11

• Openning .................................................................................................... 11

• Adjusting the ow rate and ush .................................................................... 11

• Jet adjustment ............................................................................................. 11

MAINTENANCE......................................................................................................... 12

• assembly/disassembly................................................................................... 12

• Cleaning...................................................................................................... 13

• Spare parts..................................................................................................13

• Handling / Transport / Storage ....................................................................... 13

BILL OF MATERIALS ................................................................................................ 14

EXPLODED VIEW................................................................................................. 14

PARTS LIST ........................................................................................................ 15

NOTES ..................................................................................................................... 16

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

AQUASTAR - High pressure hand nozzle with selectable ow rate and stream pattern, 180 lpm, spinning teeth

Warning

• Note

POK SAS reserves the right to change or modify the specications of its products at any time to incorporate

the latest technological and regulatory developments. The information contained in this document is subject

to change without notice.

• General Warning

Before using or installing the equipment, it is essential for the safety of people and

equipment, to read the information contained in this operating manual before using

the equipment. The use, maintenance, or any other operation of the equipment,

must be carried out exclusively by personnel informed of safety rules and trained in

the use of this material.

The non-compliance of safety instructions can be dangerous and cause serious

bodily harm and/or property damage.

• Security

This symbol indicates important safety tips. Pay careful attention to prevent serious bodily

harm and/or property damage.

This symbol indicates instructions that must be observed to ensure smooth operation of the

device. Please always make sure to follow all the necessary precautions.

This symbol indicates useful information to know and understand the correct operation of the

device.

• Introduction

Please read the information contained in this manual before using or operating the equipment.

The use, maintenance or any other operation of the equipment, must be carried out exclusively by personnel

informed of safety rules and trained in the use of the equipment.

While using the re nozzle (use, maintenance, installation, ...) it is important to wear personal protective

equipment.

• Dismantling and Warranty

This product is guaranteed for a period of one years for any manufacturing defect, except with special

written agreement.

The exploded views and parts lists are not a dismantling manual.

Any dismantling or maintenance operation of the device must be done with the water supply turned off.

Dismantling and/or modication of the equipment outside POK SAS factory is allowed only in compliance

with procedures described in this manual, and therefore does not affect the warranty.

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr 5

Warning

If the equipment is repaired, the spare parts must be supplied by POK SAS. Otherwise, the technical

specications in this document will no longer be valid, the warranty will be invalid and the manufacturer’s

responsibility will no longer be committed.

If a maintenance operation leads to a deterioration of parts, the guarantee may not be applicable if the

procedure is not carried out in accordance with this manual.

Although it is not explicitly stated in instructions, use and wear of protective equipment are obligatory during

maintenance operations. POK SAS cannot be responsible for any damage or accident which may occur during

the dismantling. If this obligation is not met, please refer to the tools instructions guides for more details.

Only POK is able to guarantee proper functioning and security of the equipment following a disassembly.

Accordingly, POK SAS cannot be held liable for any incidents caused as a result of the dismantling outside

of its workshops.

Do not modify the equipment, it may not work properly or be dangerous for use. Any modication not

approved by POK SAS will void the warranty.

• Use

Please respect the technical limitations of the equipment.

The equipment should not be used if a component is damaged or missing.

Disrespect of safety instructions and use of the branchpipe over the recommended pressure

can be dangerous and even cause death.

It is important to know and respect the safety rules regarding your operating environment.

In case of re that occurs near or caused by electrical installations, it is imperative to:

1) Cut of power supply as soon as possible

2) Maintain a safe distance of at least 1 meter up to 1,000 bolts.

3) To use a spray with a minimum 30° angle.

Before placing the nozzle in service, check :

1) No part is damaged, broken or missing.

2) that the coupling is perfectly connected to the hose.

3) that the swivel tting freely.

4) the opening and closing of the valve.

5) That the ush ring works properly

6) That the ow pattern selector rotates and slides properly.

POK SAS is not responsible of any accident that may occur during operation caused by improper use or non-

compliance with safety requirements.

• Limits of use

Our nozzles are guaranteed for a maximum operating pressure of PN 40.

Our nozzles are guaranteed to resist a maximum of 60 bar in a closed position.

Without explicit written authorization from POK, the warranty will be void if the pressures

listed above are exceeded.

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

AQUASTAR - High pressure hand nozzle with selectable  ow rate and stream pattern, 180 lpm, spinning teeth

Main view

Technical data

MARK DESCRIPTION

1 Body

2 Flow rate adjustment ring

3 Stream pattern adjustment ring

4 Head bumper with tactile indicators for stream pattern

5 Shutoff handle

6 Pistol handle with polyurethane cover

Swivel inlet 3/4’’ BSP female thread

Note: A different coupling is available upon request. See our catalogue for more information on

couplings.

8 Stem

9 Spinning teeth

POK SAS can supply each product with

different couplings. Depending on your

order the couplings can be different

from the ones shown here.

can supply each product with

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr 7

AQUASTAR - High pressure hand nozzle with selectable  ow rate and stream pattern, 180 lpm, spinning teeth

Overall dimensions

Technical data

Weight: 1,62 Kg

224 mm

R 111 mm

143 mm

95 mm

260 mm

167 mm

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

AQUASTAR - High pressure hand nozzle with selectable ow rate and stream pattern, 180 lpm, spinning teeth

Characteristics

Technical data

DESIGNATION DESCRIPTION

Body, stem, stem axle and screws • Stainless steel

Coupling • Aluminium alloy

Rings, bore and inlet ring • Aluminium alloy

• Hard anodisation

Shutoff handle • Polyamide

Head bumper and pistol handle • Polyurethane

Valve axle • Brass

• Construction

• Hydraulic Characteristics

• Mechanical Characteristics

DESIGNATION DESCRIPTION

Flow rate • 180 lpm @ 20 bar

Max. working pressure • 40 bar

Test pressure • 60 bar

Flow rate adjustment • By turning ow rate adjustment ring

• 55, 110 and 180 lpm - Position ‘‘FLUSH’’ at stop

Type of diffusion • Spinning teeth

• Hallow cone diffusion

Stream pattern adjustment

• By turning head ring

• Straight stream, attack stream (35°) or full fog

diffusion spray (130°)

Shutoff • With ball valve

DESIGNATION DESCRIPTION

Inlet

• Swivelling, 3/4’’ BSP female thread

Note: A different coupling is available upon request. See our

catalogue for more information on couplings.

Filter • Yes, stop particles larger than Ø 5 mm

Flush • By ow rate adjustment ring rotation

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr 9

100

150

200

250

300

0 5 10 15 20 25 30 35 40

Débits / Flow rate (l/min)

Pression / Pressure (bar)

Courbes débits/pression

55 l/min

110 l/min

180 l/min

Technical data

Characteristics

1 - General data

3 - Mechanical System

2 - Flow rate / pressure curve

1.1 - Manufacturer POK

1.2 - Type AQUASTAR

1.3 - Flow rate at PR180 lpm @ 20 bar

1.4 - Selectable ow rate 55, 110 and 180 lpm

1.5 - Type of diffusion Hallow cone diffusion

3.1 - Connection system Swivelling

3.2 - Gripping device Pistol handle

3.3 - Opening / closing device With ball valve

3.4 - Straight stream / Fog stream device Rotating part

3.5 - Flow rate adjustment system Rotating part

3.6 - System of purge or ush Rotating part

Bar

55 lpm

180 lpm

110 lpm

lpm Débit

/ Flow rate

Throw range in meters, at 20 bar

55 lpm 110 lpm 180 lpm

Straight stream range (m) 20 27 32

POK SAS - ZI Les Guignons - 10400 Nogent-sur-Seine - FRANCE

Tel: +33 (0)3 25 39 84 78 - Fax: +33 (0)3 25 39 84 90 - Email: [email protected] - Web: www.pok.fr

AQUASTAR - High pressure hand nozzle with selectable  ow rate and stream pattern, 180 lpm, spinning teeth

Characteristics

Technical data

4 - Prescriptions

Number of the

party and of the

corresponding

paragraph of the

standard

EN 15182

DESCRIPTION Test results

CONTROL and HANDLING

- 2 / § 4.2.1 Dimensions (mm) 260 x 95 x 224

- 2 / § 4.2.1 Weight (kg) 1.62

Torques needed for moving operating elements (N.m)

Lever

- 2 / § 4.2.2.1 Shutoff handle

Selectable  ow rate element ( N.m )

- 2 / § 4.2.2.1 Selective  ow pattern ring

- 2 / § 4.2.2.1 Inlet swivel coupling

- 2 / § 4.2.3 Flow rate adjustment

Rotation from minimum to maximum  ow rate 90°

- 2 / § 4.2.4

Jet adjustment

Rotation from straight stream to full fog with a minimum spray

angle of 100°

155°

PERFORMANCES

- 2 / § 4.3.3 Effective throw (m) 32

Spray

- 2 / § 4.3.4 Full fog: angle 130°

- 2 / § 4.3.5 Narrow spray: angle 35°

PHYSICS

- 1 / § 7.2.2 Cold resistance (°C) -25°C

- 1 / § 7.2.1 Heat resistance (°C) +80°C

- 1 / § 6.3.1 Non-obstruction test (mm) 5

- 2 / § 4.3.5 Brusting pressure (bar) > 100

5 - Certi ed by:

POK SAS

ZI Les Guignons

10400 Nogent-Sur-Seine

Table of contents

Other POK Firefighting Equipment manuals

POK

POK Froggy User manual

POK

POK CRIQUET User manual

POK

POK MONTMIRAIL User manual

POK

POK MIXY Eductor User manual

Popular Firefighting Equipment manuals by other brands

Tyco Fire Protection Products

Tyco Fire Protection Products AM31 AQUAMIST Nozzle instructions

Task Force Tips

Task Force Tips Extend-A-Gun RC3 INSTRUCTION FOR SAFE INSTALLATION, OPERATION, AND MAINTENANCE

Autronica

Autronica AutroSafe BSD-321/EX manual

Waterous

Waterous AQUIS Series Installation, operation and maintenance instructions

CTP

CTP NPO ETERNIS GUARANT-7 Technical description and instruction manual

MSA

MSA M1 operating manual

Grundfos

Grundfos Hydro EN Safety instructions and other important information

Amerex

Amerex 570 Owner's service manual

Vimpex

Vimpex BIG HP18-H200-B1 Operation manual

Global Fire Equipment

Global Fire Equipment GFE-PA-VOX-A manual

Chubb

Chubb PEFS F3 Maintenance manual

Projoy Electric

Projoy Electric PEFS-PL Series installation guide

klimaoprema

klimaoprema FDC25 Series product manual

Tyco

Tyco 802SB installation instructions

Mueller

Mueller Revive M2 user manual

SEI Industries

SEI Industries BAMBI MAX BBXHL4000PF Service manual

Waterax

Waterax MARK-3 owner's manual

Apollo

Apollo Smoke Detector XP95 quick start guide