PoeWit OD-2 User manual
poewit.com
CLOUD INTELLIGENT
OUTDOOR ARCHITECTURAL LED LIGHTS
POWERED BY PoE
QUICK START GUIDE
OD-2 MODEL
poewit.com
INSTALLATION AND SETUP
2
WARNING - BEFORE INSTALLATION
POEWIT POE POWERED ARCHITECTURAL LIGHTS CAN BE MOUNTED
OUTDOORS, ON A WALL OR CEILING. THE LIGHT HOUSING IS
WATER-RESISTANT; HOWEVER, THE ACCOMPANYING POE LED
DRIVER IS NOT WATER-RESISTANT.
THIS POE LED DRIVER IS DESIGNED TO BE SECURELY MOUNTED
IN A LOCATION FREE OF MOISTURE, SUCH AS INSIDE THE CAVITY
OF THE WALL.
IN CERTAIN INSTALLATIONS, THE INSTALLER MAY EXTEND THE
TWO CONDUCTOR WIRES (+ AND -) CONNECTING THE POE
DRIVER TO THE LIGHT FIXTURE. WE RECOMMEND USING AT
LEAST AN 20AWG WIRE AND 25 FEET OR LESS TO PREVENT
VOLTAGE DROPS.
Outside Wall
Inside Wall
poewit.com
INSTALLATION AND SETUP
3
BEFORE YOU START
1) PACKAGE CONTENTS
Confirm that you have the package contents as follows:
1. OD-2 PoE Powered LED Flood Light
or
2. OD-2-PT PoE powered LED flood light with PoE pass-through
3. Hardware screw bag
4. Quick start guide
OS-458/A
PA SS IVE INF RA -RED
SE NS OR
FO R AU TO MA TION
CO NT RO L
PATTERN
ITEM
QUANTITY
OD-2 or
OD-2-PT
1
PoE Driver
1
Poe Powered
Architectural Lights
Quick start
1
or
poewit.com
INSTALLATION AND SETUP
4
2) INSTALLATION AND SETUP
1. Select a proper location for light xture and other connected devices.
2. Install Category Cable (CAT5e/6/7) from your PoE-enabled router
or broadband modem to the location selected for light installation.
3. Loosen the four screws holding the light housing back
mounting plate See figure 1
4. Insert category cable into PoE light driver and pull the light
driver cable through the back mounting plate opening. Mount
the back mounting plate to the wall with the four screws.
See figure 2
Fig 1.
poewit.com
INSTALLATION AND SETUP
5
5. Connect the light housing to the PoE driver wire. See figure 3
Fig 2
Fig 3
poewit.com
INSTALLATION AND SETUP
6
6. Push the cable assembly into the wall cavity and secure the
water tight grommet onto the back mounting plate. See gure 4
Fig 4
poewit.com
INSTALLATION AND SETUP
7
7. Attach the Light Housing to the Back Mounting Plate and tighten
the four screws. See gure 5
Fig 5
poewit.com
INSTALLATION AND SETUP
8
3) CONFIGURATION INSTRUCTIONS
Power up device; you should be automatically connected to the
internet. You are now ready to download and install your app.
You can search PoEWit in the apple app store or Google Play
to get the app
Note: Your device and mobile phone both must have an internet
connection through the same external IP address and must
be on the same local subnet.
After initial conguration, a PoEWit wall switch and/or PoEWit
motion detector PIR can control the lights should the internet
connection go down.
Table of contents
Other PoeWit Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
