PNI House IP716 User manual
PNI House IP716
NVR
EN User manual ......................................................... 3
BG Ръководство за употреба ............................. 28
DE Benutzerhandbuch .............................................. 53
ES Manual de usuario ............................................... 78
FR Manuel utilisateur ............................................... 103
HU Használati utasítás .............................................. 128
IT Manuale utente .................................................. 153
NL Handleiding ........................................................ 178
PL Instrukcja obsługi ............................................... 203
RO Manual de utilizare ............................................. 228
3User manual
English
Main functions
• Simultaneous real-time multi-channel recording, remote playback and
configuration
• Supports up to 16 channels with a maximum 4K resolution.
• Backup on USB flash memory and external HDD.
• Supports face and human shape detection (depending on the camera)
• Possibility to connect external speaker.
Technical specifications
Video input 16 x 4K (access bandwidth 72Mbps)
Video output 1 x VGA / 1 x HDMI
Video compression H.265AI/H.265+(compatible H.265/H.264)
Playback resolution Maxim 2K (2560 x 1440)
Audio compression G.711A
Audio output 1 x 3.5mm
Recording mode Manual, alarm, motion detection, programmed
USB 2 x USB2.0
HDD 1 x HDD SATA (max. 14Tb)
ONVIF Yes
Power voltage 12V / 2A
Dimensions 255 x 210 x 45 mm
Working temperature -26°C ~ +60°C
Instructions for use
Installing the storage unit
Before first use, please install the storage unit. Only one SATA HDD with a
maximum capacity of 14TB can be installed inside the recording unit (HDD is
not included in the package).
• Loosen the screws and open the NVR housing
• Connect the data cables and secure the hard drive with the screws
User manual 4
English
• Close back the NVR housing
• Connect the power and internet cable to the NVR
Turn on the device
Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up. By default, 16 channels will be displayed on the screen.
If the start time is within the preset schedule for recording, then the recording
function will start automatically.
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage fluctuations.
Turn o the device
There are two ways to turn o the device.
1. Access the main menu (right click on the screen) and select the option
Logout - Shutdown
2. Turn o the power supply.
Special warnings:
1. Restart after power failure. If the device is closed abnormally, it creates a
backup and restarts from that status after power is restored.
2. Replace the battery on the system board. Before replacing the battery, you
must backup your system settings (see chapter Advanced-Import / Export)
and turn o the power supply. The device time and date must be set again after
the battery is replaced. We recommend that you replace the battery every
year.
5User manual
English
Remote control of the device
The NVR can be controlled locally or remotely from both smartphones and
computers with Windows operating system.
Operating system Application Download
Android, iOS XMEye
Android iOS
Windows General CMS
The installation file can
be downloaded from
the CD included in the
package or from the
Download section on the
product web page (www.
pni.ro)
System authentication
After turning on the device, log in to the system.
By default, the admin user is password protected by 1234. If the password is
entered incorrectly 5 times in a row, the account will be blocked. By restarting
the device or after half an hour, the account will be unlocked automatically.
Note: For the security of your system, please change the password after the first
login.
Quick setup guide
After starting the device, the quick setup guide will start.
Note: We recommend configuring the system before installing the NVR and
cameras in the final location.
User manual 6
English
Steps to follow:
1. Set the time, date and time zone.
2. Soon, a popup window will appear on the screen asking you to change the
authentication password in the system. Follow the steps on the screen or
press the ESC key on the NVR to exit the password setting interface.
Note: For the security of your system, we recommend changing the password after
the first login in the system.
3. Set the network parameters manually or activate the DHCP option for
automatic download.
4. Scan the QR code on the screen to install the XMEye application on your
mobile phone. Scan the QR code with the serial number to add the system
to the application.
5. Set the display options and resolution of the monitor connected to the
NVR. Maximum supported resolution 2560x1440 (2K).
Note: Before changing the resolution, make sure that your monitor supports that
resolution. If the set resolution is higher than the resolution of your monitor, nothing
will appear on the monitor and you will not be able to access the menu. If this
happens, however, connect the NVR to a lower resolution monitor, access the menu,
and change the resolution.
6. Press the OK key to complete the basic system configuration.
7. Right click on the screen and access the NetDetect option. Click Diagnose
to test the network configuration.
Note: For the settings to take eect, restart the system. Right click on the screen
- Logout - Reboot.
7User manual
English
The menu
In the main preview interface, right-
click with the mouse to access the
menu.
Main Menu
Options: Playback, Record Conf, Network, Date Time.
User manual 8
English
Playback
The system oers numerous filters and options for identifying the desired
record. You can search by channel number, date and time interval or by file
type.
Record Conf.
Theinterfaceallowsyoutomakethefollowingsettings:thelengthofarecording
file, the recording mode (programmed or manual), the period (day and time
interval) and the recording type (normal, motion detection and alarm).
9User manual
English
Network
Manually set the network parameters (IP address, gateway, DNS, port, etc.)
or check the DHCP option for automatic parameter retrieval.
Note: For the settings to take eect, restart the system. Right click on the screen
- Logout - Reboot.
Date time
Set the time zone, date, time and format.
User manual 10
English
System
Options: General, Encode, Backup, Snapshot Config., Display, Account.
General
The interface will allow the following settings: the menu display language, the
behavior in case of a full hard disk (overwrite or stop recording), the session
duration and enable / disable quick configuration guide at system startup.
Table of contents
Languages:
Other PNI DVR manuals
