PMV D3 User manual
PMV Remote D3
Potentiometer Calibration
How to calibrate potentiometer in
F5NU-MECPOT with Remote D3
po itioner
Removal of D3 Cover
Mount the remote feedback unit onto the actuator
Wiring Instructions
The remote unit hall be connected between terminal 3, 4 and 5 in the PMV D3
and 7, 8 and 9 in the remote feedback unit. U e a hielded cable and ground it in
the PMV D3 only. Max recommended di tance between PMV D3 and the
remote feedback unit: 5 m (16.4 ft).
NOTE: If D3 will be further than 5 m from the valve then you might need to
increa e the air tubing to 3/8” I.D.
1. With power applied to the D3, u e
the key pad and navigate to CALI RATE
> EXPERT CAL > POT. The D3 di play
hould now read like 1.
2. Pre the Down arrow key to troke
the valve to the correct po ition. Pre
the OK button once valve i at 0%
po ition.
3. Turn the pot gear in the direction the
D3 di play ay u ing the F5-22 tool
upplied with the remote feedback
unit. Once the pot gear i correct, ‘POT
OK’ will be di played on the D3’ LCD.
Pre OK.
NOTE: If the D3 never ay POT OK,
and keep changing direction from CW
to CCW (or vice ver a), then rotate the
bottom white gear wheel a full 180°
and try again.
Calibrating the Potentiometer
Contact pmv ale @flow erve.com for additional information
In ert F5-22 tool into
lot in bottom white
gear wheel
Follow on- creen
in truction to determine
which direction to rotate
gear wheel. Hit OK button
once di play ay POT OK.
Other PMV Valve Positioner manuals
Popular Valve Positioner manuals by other brands
Parker
Parker MX80L series product manual
Westlock
Westlock Quantum 2800 Installation & operating instructions
Samson
Samson 3730-0 Mounting and operating instructions
Samson
Samson TROVIS 3730-3 Mounting and operating instructions
ESCO Technologies
ESCO Technologies ETS LINDGREN 2302-001 user manual
SMC Networks
SMC Networks IP8000 manual
Samson
Samson FOUNDATION 3730-5 Mounting and operating instructions
Samson
Samson TROVIS SAFE 3731-3 Mounting and operating instructions
Flowserve
Flowserve Logix 3400MD User instructions
halstrup-walcher
halstrup-walcher HIPERDRIVE instruction manual
ABB
ABB TZIDC Commissioning instructions
Samson
Samson FOUNDATION 3730-5 Mounting and operating instructions